From: Robin Gong <redacted>
[ Upstream commit 980f884866eed4dda2a18de888c5a67dde67d640 ]
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
Signed-off-by: Robin Gong <redacted>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-imx.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
@@ -622,8 +622,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,ctrl|=mx51_ecspi_clkdiv(spi_imx,spi_imx->spi_bus_clk,&clk);spi_imx->spi_bus_clk=clk;-if(spi_imx->usedma)-ctrl|=MX51_ECSPI_CTRL_SMC;+/* ERR009165: work in XHC mode as PIO */+ctrl&=~MX51_ECSPI_CTRL_SMC;writel(ctrl,spi_imx->base+MX51_ECSPI_CTRL);
@@ -1253,10 +1253,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,{intret;-/* use pio mode for i.mx6dl chip TKT238285 */-if(of_machine_is_compatible("fsl,imx6dl"))-return0;-spi_imx->wml=spi_imx->devtype_data->fifo_size/2;/* Prepare for TX DMA: */
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
From: Lucas Stach <l.stach@pengutronix.de> Date: 2021-09-09 16:42:09
Hi Sasha,
Am Donnerstag, dem 09.09.2021 um 07:37 -0400 schrieb Sasha Levin:
From: Robin Gong <redacted>
[ Upstream commit 980f884866eed4dda2a18de888c5a67dde67d640 ]
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
This patch is part of a quite extensive series touching multiple
drivers and devicetree descriptions and will do more harm than good if
backported without the rest of the series. The options here are:
a) backport the entire series (this will most likely not match the
stable criteria)
b) drop the patch from the stable queue
Regards,
Lucas
quoted hunk
Signed-off-by: Robin Gong <redacted>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/spi/spi-imx.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
@@ -622,8 +622,8 @@ static int mx51_ecspi_prepare_transfer(struct spi_imx_data *spi_imx,ctrl|=mx51_ecspi_clkdiv(spi_imx,spi_imx->spi_bus_clk,&clk);spi_imx->spi_bus_clk=clk;-if(spi_imx->usedma)-ctrl|=MX51_ECSPI_CTRL_SMC;+/* ERR009165: work in XHC mode as PIO */+ctrl&=~MX51_ECSPI_CTRL_SMC;writel(ctrl,spi_imx->base+MX51_ECSPI_CTRL);
@@ -1253,10 +1253,6 @@ static int spi_imx_sdma_init(struct device *dev, struct spi_imx_data *spi_imx,{intret;-/* use pio mode for i.mx6dl chip TKT238285 */-if(of_machine_is_compatible("fsl,imx6dl"))-return0;-spi_imx->wml=spi_imx->devtype_data->fifo_size/2;/* Prepare for TX DMA: */
Hi Lucas,
On Thu, Sep 9, 2021 at 1:43 PM Lucas Stach [off-list ref] wrote:
Hi Sasha,
Am Donnerstag, dem 09.09.2021 um 07:37 -0400 schrieb Sasha Levin:
quoted
From: Robin Gong <redacted>
[ Upstream commit 980f884866eed4dda2a18de888c5a67dde67d640 ]
Change to XCH mode even in dma mode, please refer to the below
errata:
https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
This patch is part of a quite extensive series touching multiple
drivers and devicetree descriptions and will do more harm than good if
backported without the rest of the series. The options here are:
a) backport the entire series (this will most likely not match the
stable criteria)
b) drop the patch from the stable queue
This patch is part of a quite extensive series touching multiple
drivers and devicetree descriptions and will do more harm than good if
backported without the rest of the series. The options here are:
a) backport the entire series (this will most likely not match the
stable criteria)
b) drop the patch from the stable queue
This patch is part of a quite extensive series touching multiple
drivers and devicetree descriptions and will do more harm than good if
backported without the rest of the series. The options here are:
a) backport the entire series (this will most likely not match the
stable criteria)
b) drop the patch from the stable queue