[PATCH 1/2] arm64: dts: rockchip: add isp node for px30

@@ -1189,6 +1189,47 @@ vopl_mmu: iommu@ff470f00 {
 		status = "disabled";
 	};
 
+	isp: isp@ff4a0000 {
+		compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
+		reg = <0x0 0xff4a0000 0x0 0x8000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp", "mi", "mipi";
+		clocks = <&cru SCLK_ISP>,
+			 <&cru ACLK_ISP>,
+			 <&cru HCLK_ISP>,
+			 <&cru PCLK_ISP>;
+		clock-names = "isp", "aclk", "hclk", "pclk";
+		iommus = <&isp_mmu>;
+		phys = <&csi_dphy>;
+		phy-names = "dphy";
+		power-domains = <&power PX30_PD_VI>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+	};
+
+	isp_mmu: iommu@ff4a8000 {
+		compatible = "rockchip,iommu";
+		reg = <0x0 0xff4a8000 0x0 0x100>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+		clock-names = "aclk", "iface";
+		power-domains = <&power PX30_PD_VI>;
+		rockchip,disable-mmu-reset;
+		#iommu-cells = <0>;
+	};
+
 	qos_gmac: qos@ff518000 {
 		compatible = "rockchip,px30-qos", "syscon";
 		reg = <0x0 0xff518000 0x0 0x20>;

@@ -114,6 +114,10 @@ &cpu3 {
 	cpu-supply = <&vdd_arm>;
 };
 
+&csi_dphy {
+	status = "okay";
+};
+
 &display_subsystem {
 	status = "okay";
 };

@@ -428,6 +432,36 @@ sensor@4c {
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	/* These are relatively safe rise/fall times; TODO: measure */
+	i2c-scl-falling-time-ns = <50>;
+	i2c-scl-rising-time-ns = <300>;
+
+	ov5695: ov5695@36 {
+		compatible = "ovti,ov5695";
+		reg = <0x36>;
+		avdd-supply = <&vcc2v8_dvp>;
+		clocks = <&cru SCLK_CIF_OUT>;
+		clock-names = "xvclk";
+		dvdd-supply = <&vcc1v5_dvp>;
+		dovdd-supply = <&vcc1v8_dvp>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cif_clkout_m0>;
+		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ucam_out: endpoint {
+				remote-endpoint = <&mipi_in_ucam>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &i2s1_2ch {
 	status = "okay";
 };

@@ -443,6 +477,24 @@ &io_domains {
 	vccio6-supply = <&vccio_flash>;
 };
 
+&isp {
+	status = "okay";
+
+	ports {
+		port@0 {
+			mipi_in_ucam: endpoint@0 {
+				reg = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ucam_out>;
+			};
+		};
+	};
+};
+
+&isp_mmu {
+	status = "okay";
+};
+
 &pinctrl {
 	headphone {
 		hp_det: hp-det {