As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.
U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.
[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
Signed-off-by: Roger Quadros <rogerq@kernel.org>
---
Changelog:
v2
-refer to DT spec instead of schema in commit log.
arch/arm/boot/dts/da850-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 87c517d65f62..9dc79b5977bf 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -415,7 +415,7 @@
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
- status = "ok";
+ status = "okay";
cs3 {
#address-cells = <2>;
#size-cells = <1>;--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 13:55-20210824, Roger Quadros wrote:
As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.
U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.
^^ the above comment might be fine to indicate the side effect of
non-compliance
[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
quoted hunk
---
Changelog:
v2
-refer to DT spec instead of schema in commit log.
arch/arm/boot/dts/da850-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 87c517d65f62..9dc79b5977bf 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -415,7 +415,7 @@
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
- status = "ok";
+ status = "okay";
cs3 {
#address-cells = <2>;
#size-cells = <1>;--
2.17.1
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi Sekhar,
On 25/08/2021 19:15, Nishanth Menon wrote:
On 13:55-20210824, Roger Quadros wrote:
quoted
As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.
U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.
^^ the above comment might be fine to indicate the side effect of
non-compliance
quoted
[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Could you please pick this one if not too late for -next. Thanks.
quoted
---
Changelog:
v2
-refer to DT spec instead of schema in commit log.
arch/arm/boot/dts/da850-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 87c517d65f62..9dc79b5977bf 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -415,7 +415,7 @@
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
- status = "ok";
+ status = "okay";
cs3 {
#address-cells = <2>;
#size-cells = <1>;--
2.17.1
--
cheers,
-roger
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel