# Re: \[PATCH v5 3/5\] ARM: dts: NSP: Add DT files for Meraki MX64 series

- From: Florian Fainelli \<f.fainelli@gmail.com\>
- Date: 2021-08-22 19:07:47 
- List: linux-arm-kernel
- Page: https://ratatoskr.run/linux-arm-kernel/2021/08/1485160
- Thread: https://ratatoskr.run/linux-devicetree/2021/08/1470573/t.md

```text
On Fri,  6 Aug 2021 21:44:34 +0100, Matthew Hagan [ref] wrote:
> MX64 & MX64W Hardware info:
>   - CPU: Broadcom BCM58625 Cortex A9 @ 1200Mhz
>   - RAM: 2 GB (4 x 4Gb SK Hynix H5TC4G83CFR)
>   - Storage: 1 GB (Micron MT29F8G08ABACA)
>   - Networking: BCM58625 internal switch (5x 1GbE ports)
>   - USB: 1x USB2.0
>   - Serial: Internal header
>   - WLAN(MX64W only): 2x Broadcom BCM43520KMLG on the PCI bus
> 
> This patch adds the Meraki MX64 series-specific bindings. Since some
> devices make use of the older A0 SoC, changes need to be made to
> accommodate this case, including removal of coherency options and
> modification to the secondary-boot-reg.
> 
> Signed-off-by: Matthew Hagan <redacted>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/master, thanks!
--
Florian

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
```