[PATCH 1/2] ARM: dts: at91: add pinctrl-{names, 0} for all gpios
From: Claudiu Beznea <hidden>
Date: 2021-07-27 07:42:23
Add pinctrl-names and pinctrl-0 properties on controllers that claims to
use pins to avoid failures due to
commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges")
and also to avoid using pins that may be claimed my other IPs.
Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained
board")
Signed-off-by: Claudiu Beznea <redacted>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 16 +++++++++++-
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 29 +++++++++++++++++++++
arch/arm/boot/dts/at91-sama5d4_xplained.dts | 19 ++++++++++++++
3 files changed, 63 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index edca66c232c1..ebbc9b23aef1 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts@@ -92,6 +92,8 @@ sw1 { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; /* Conflict with pwm0. */ red {
@@ -537,6 +539,10 @@ AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_H AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA19 DAT2 periph A with pullup */ AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA20 DAT3 periph A with pullup */ }; + pinctrl_sdmmc0_cd: sdmmc0_cd { + atmel,pins = + <AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; sdmmc1 {
@@ -569,6 +575,14 @@ pinctrl_usb_default: usb_default { AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; }; + + leds { + pinctrl_gpio_leds: gpio_leds { + atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; }; /* pinctrl */ &pwm0 {
@@ -580,7 +594,7 @@ &pwm0 { &sdmmc0 { bus-width = <4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sdmmc0_default>; + pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>; status = "okay"; cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>; disable-wp;
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 9c55a921263b..cc55d1684322 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts@@ -57,6 +57,8 @@ slot@0 { }; spi0: spi@f0004000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_cs>; cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; };
@@ -169,6 +171,8 @@ slot@0 { }; spi1: spi@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_cs>; cs-gpios = <&pioC 25 0>; status = "okay"; };
@@ -248,6 +252,26 @@ pinctrl_usb_default: usb_default { <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; }; + + pinctrl_gpio_leds: gpio_leds_default { + atmel,pins = + <AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_spi0_cs: spi0_cs_default { + atmel,pins = + <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_spi1_cs: spi1_cs_default { + atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + + pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default { + atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; };
@@ -339,6 +363,8 @@ rootfs@800000 { vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>; gpio = <&pioE 2 GPIO_ACTIVE_LOW>; regulator-name = "mmc0-card-supply"; regulator-min-microvolt = <3300000>;
@@ -362,6 +388,9 @@ bp3 { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + status = "okay"; d2 { label = "d2";
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 046796c5b9b0..541779af049f 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts@@ -80,6 +80,8 @@ usart4: serial@fc010000 { }; spi1: spi@fc018000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_cs>; cs-gpios = <&pioB 21 0>; status = "okay"; };
@@ -137,6 +139,19 @@ pinctrl_macb0_phy_irq: macb0_phy_irq_0 { atmel,pins = <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_spi0_cs: spi0_cs_default { + atmel,pins = + <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_gpio_leds: gpio_leds_default { + atmel,pins = + <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + pinctrl_vcc_mmc1_reg: vcc_mmc1_reg { + atmel,pins = + <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; }; }; };
@@ -242,6 +257,8 @@ pb_user1 { leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; status = "okay"; d8 {
@@ -268,6 +285,8 @@ vcc_3v3_reg: fixedregulator_3v3 { vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_mmc1_reg>; gpio = <&pioE 4 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; regulator-min-microvolt = <3300000>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel