[PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information

Subsystems: arm/samsung s3c, s5p and exynos arm architectures, the rest

STALE1861d LANDED

Landed in mainline as c4e40c0144cb on 2021-07-15.

5 messages, 2 authors, 2021-07-15 · open the first message on its own page

[PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information

From: Alim Akhtar <alim.akhtar@samsung.com>
Date: 2021-06-22 13:05:26

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each cores
and 2MB of L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
Changes since v1:
* no change in this patch
* changes as per Krzysztof's review comments in patch 2/2

 arch/arm64/boot/dts/exynos/exynos7.dtsi | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 10244e59d56d..8b06397ba6e7 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi

@@ -54,6 +54,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x0>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas1: cpu@1 {

@@ -61,6 +68,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x1>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas2: cpu@2 {

@@ -68,6 +82,13 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x2>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
 		};
 
 		cpu_atlas3: cpu@3 {

@@ -75,6 +96,20 @@
 			compatible = "arm,cortex-a57";
 			reg = <0x3>;
 			enable-method = "psci";
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&atlas_l2>;
+		};
+
+		atlas_l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
 		};
 	};

base-commit: 614124bea77e452aa6df7a8714e8bc820b489922
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v2 2/2] arm64: dts: exynos5433: Add cpu cache information

From: Alim Akhtar <alim.akhtar@samsung.com>
Date: 2021-06-22 13:05:39

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each A57 cores
with 2MB L2 cache.
And 32/32 KB I/D cache for each A53 cores with
256KB L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
-Changes since v1:
* addressed Krzysztof's review comments

 arch/arm64/boot/dts/exynos/exynos5433.dtsi | 70 ++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 18a912eee360..73aa0fa9b778 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi

@@ -62,6 +62,13 @@
 			clock-names = "apolloclk";
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
 		};
 
 		cpu1: cpu@101 {

@@ -72,6 +79,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
 		};
 
 		cpu2: cpu@102 {

@@ -82,6 +96,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
 		};
 
 		cpu3: cpu@103 {

@@ -92,6 +113,13 @@
 			clock-frequency = <1300000000>;
 			operating-points-v2 = <&cluster_a53_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&cluster_a53_l2>;
 		};
 
 		cpu4: cpu@0 {

@@ -104,6 +132,13 @@
 			clock-names = "atlasclk";
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
 		};
 
 		cpu5: cpu@1 {

@@ -114,6 +149,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
 		};
 
 		cpu6: cpu@2 {

@@ -124,6 +166,13 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
 		};
 
 		cpu7: cpu@3 {

@@ -134,6 +183,27 @@
 			clock-frequency = <1900000000>;
 			operating-points-v2 = <&cluster_a57_opp_table>;
 			#cooling-cells = <2>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			next-level-cache = <&cluster_a57_l2>;
+		};
+
+		cluster_a57_l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+		};
+
+		cluster_a53_l2: l2-cache1 {
+			compatible = "cache";
+			cache-size = <0x40000>;
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information

From: Krzysztof Kozlowski <hidden>
Date: 2021-06-23 06:08:47

On 22/06/2021 15:05, Alim Akhtar wrote:

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each cores
and 2MB of L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
Changes since v1:
* no change in this patch
* changes as per Krzysztof's review comments in patch 2/2

 arch/arm64/boot/dts/exynos/exynos7.dtsi | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Thanks, patches look good. It's too late in the cycle, so I will take
these after the merge window.


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-15 18:49:46

On Tue, 22 Jun 2021 18:35:50 +0530, Alim Akhtar wrote:

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each cores
and 2MB of L2 cache.

Applied, thanks!

[1/2] arm64: dts: exynos7: Add cpu cache information
      commit: 43e7b8b864cc5319f323dfedf633071a434410f7
[2/2] arm64: dts: exynos5433: Add cpu cache information
      commit: d5c65c4aa23c52226067d7882ba2ce2055c9315d

Best regards,
-- 
Krzysztof Kozlowski [off-list ref]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v2 1/2] arm64: dts: exynos7: Add cpu cache information

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-15 18:52:23

On 22/06/2021 15:05, Alim Akhtar wrote:

This patch adds cpu caches information to its dt
nodes so that the same is available to userspace
via sysfs.
This SoC has 48/32 KB I/D cache for each cores
and 2MB of L2 cache.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
Changes since v1:
* no change in this patch
* changes as per Krzysztof's review comments in patch 2/2

 arch/arm64/boot/dts/exynos/exynos7.dtsi | 35 +++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

Thanks applied with fixes:
1. Title prefix as exynos,
2. Proper wrapping length of commit message (please use wrapping as in
coding style),
3. "This patch" -> imperative mode as in coding style.


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help