[PATCH 0/9] MT8195 SMI support

STALE1850d

Revision v1 of 4 in this series.

18 messages, 2 authors, 2021-07-12 · open the first message on its own page

[PATCH 0/9] MT8195 SMI support

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:44:03

This patchset mainly adds SMI support for mt8195.

Comparing with the previous version, add two new functions:
a) add smi sub common
b) add initial setting for smi-common and smi-larb.

Yong Wu (9):
  dt-bindings: memory: mediatek: Add mt8195 smi binding
  dt-bindings: memory: mediatek: Add mt8195 smi sub common
  memory: mtk-smi: Use clk_bulk instead of the clk ops
  memory: mtk-smi: Rename smi_gen to smi_type
  memory: mtk-smi: Adjust some code position
  memory: mtk-smi: Add smi sub common support
  memory: mtk-smi: mt8195: Add smi support
  memory: mtk-smi: mt8195: Add initial setting for smi-common
  memory: mtk-smi: mt8195: Add initial setting for smi-larb

 .../mediatek,smi-common.yaml                  |  31 +-
 .../memory-controllers/mediatek,smi-larb.yaml |   3 +
 drivers/memory/mtk-smi.c                      | 568 ++++++++++--------
 3 files changed, 347 insertions(+), 255 deletions(-)

-- 
2.18.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:44:16

This patch adds mt8195 smi supporting in the bindings.

In mt8195, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connects with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.

Something like this:

    IOMMU(VDO)          IOMMU(VPP)
       |                   |
  SMI_COMMON_VDO      SMI_COMMON_VPP
  ---------------     ----------------
  |      |   ...      |      |     ...
larb0 larb2  ...    larb1 larb3    ...

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml    | 6 +++++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index a08a32340987..6317025bd203 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

@@ -16,7 +16,7 @@ description: |
   MediaTek SMI have two generations of HW architecture, here is the list
   which generation the SoCs use:
   generation 1: mt2701 and mt7623.
-  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183 and mt8192.
+  generation 2: mt2712, mt6779, mt8167, mt8173, mt8183, mt8192 and mt8195.
 
   There's slight differences between the two SMI, for generation 2, the
   register which control the iommu port is at each larb's register base. But

@@ -36,6 +36,8 @@ properties:
           - mediatek,mt8173-smi-common
           - mediatek,mt8183-smi-common
           - mediatek,mt8192-smi-common
+          - mediatek,mt8195-smi-common-vdo
+          - mediatek,mt8195-smi-common-vpp
 
       - description: for mt7623
         items:

@@ -100,6 +102,8 @@ allOf:
             - mediatek,mt6779-smi-common
             - mediatek,mt8183-smi-common
             - mediatek,mt8192-smi-common
+            - mediatek,mt8195-smi-common-vdo
+            - mediatek,mt8195-smi-common-vpp
 
     then:
       properties:

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index 7ed7839ff0a7..a100283903bd 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml

@@ -24,6 +24,7 @@ properties:
           - mediatek,mt8173-smi-larb
           - mediatek,mt8183-smi-larb
           - mediatek,mt8192-smi-larb
+          - mediatek,mt8195-smi-larb
 
       - description: for mt7623
         items:

@@ -75,6 +76,7 @@ allOf:
         compatible:
           enum:
             - mediatek,mt8183-smi-larb
+            - mediatek,mt8195-smi-larb
 
     then:
       properties:

@@ -109,6 +111,7 @@ allOf:
               - mediatek,mt6779-smi-larb
               - mediatek,mt8167-smi-larb
               - mediatek,mt8192-smi-larb
+              - mediatek,mt8195-smi-larb
 
     then:
       required:

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/9] dt-bindings: memory: mediatek: Add mt8195 smi sub common

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:44:27

This patch adds the binding for smi-sub-common. The SMI block diagram
like this:

        IOMMU
         |  |
      smi-common
  ------------------
  |      ....      |
 larb0           larb7   <-max is 8

The smi-common connects with smi-larb and IOMMU. The maximum larbs number
that connects with a smi-common is 8. If the engines number is over 8,
sometimes we use a smi-sub-common which is nearly same with smi-common.
It supports up to 8 input and 1 output(smi-common has 2 output)

Something like:

        IOMMU
         |  |
      smi-common
  ---------------------
  |      |          ...
larb0  sub-common   ...   <-max is 8
      -----------
       |    |    ...   <-max is 8 too.
     larb2 larb5

We don't need extra SW setting for smi-sub-common, only the sub-common has
special clocks need to enable when the engines access dram.

If it is sub-common, it should have a "mediatek,smi" phandle to point to
its smi-common. also, the sub-common only has one gals clock.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../mediatek,smi-common.yaml                  | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index 6317025bd203..11515afdfb2e 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml

@@ -38,6 +38,7 @@ properties:
           - mediatek,mt8192-smi-common
           - mediatek,mt8195-smi-common-vdo
           - mediatek,mt8195-smi-common-vpp
+          - mediatek,mt8195-smi-sub-common
 
       - description: for mt7623
         items:

@@ -69,6 +70,10 @@ properties:
     minItems: 2
     maxItems: 4
 
+  mediatek,smi:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: a phandle to the smi-common node above. Only for sub-common.
+
 required:
   - compatible
   - reg

@@ -95,6 +100,26 @@ allOf:
             - const: smi
             - const: async
 
+  - if:  # only for sub common
+      properties:
+        compatible:
+          contains:
+            enum:
+              - mediatek,mt8195-smi-sub-common
+    then:
+      required:
+        - mediatek,smi
+      properties:
+        clock:
+          items:
+            minItems: 3
+            maxItems: 3
+        clock-names:
+          items:
+            - const: apb
+            - const: smi
+            - const: gals0
+
   - if:  # for gen2 HW that have gals
       properties:
         compatible:

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:44:41

smi have many clocks: apb/smi/gals.
This patch use clk_bulk interface instead of the orginal one to simply
the code.

gals is optional clk(some larbs may don't have gals). use clk_bulk_optional
instead. and then remove the has_gals flag.

Also remove clk fail logs since bulk interface already output fail log.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 124 +++++++++++----------------------------
 1 file changed, 34 insertions(+), 90 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..bcd2bf130655 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -60,9 +60,18 @@ enum mtk_smi_gen {
 	MTK_SMI_GEN2
 };
 
+#define MTK_SMI_CLK_NR_MAX			4
+
+static const char * const mtk_smi_common_clocks[] = {
+	"apb", "smi", "gals0", "gals1", /* glas is optional */
+};
+
+static const char * const mtk_smi_larb_clocks[] = {
+	"apb",  "smi", "gals"
+};
+
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
-	bool             has_gals;
 	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
 };

@@ -70,13 +79,12 @@ struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
-	bool				has_gals;
 };
 
 struct mtk_smi {
 	struct device			*dev;
-	struct clk			*clk_apb, *clk_smi;
-	struct clk			*clk_gals0, *clk_gals1;
+	unsigned int			clk_num;
+	struct clk_bulk_data		clks[MTK_SMI_CLK_NR_MAX];
 	struct clk			*clk_async; /*only needed by mt2701*/
 	union {
 		void __iomem		*smi_ao_base; /* only for gen1 */

@@ -95,45 +103,6 @@ struct mtk_smi_larb { /* larb: local arbiter */
 	unsigned char			*bank;
 };
 
-static int mtk_smi_clk_enable(const struct mtk_smi *smi)
-{
-	int ret;
-
-	ret = clk_prepare_enable(smi->clk_apb);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(smi->clk_smi);
-	if (ret)
-		goto err_disable_apb;
-
-	ret = clk_prepare_enable(smi->clk_gals0);
-	if (ret)
-		goto err_disable_smi;
-
-	ret = clk_prepare_enable(smi->clk_gals1);
-	if (ret)
-		goto err_disable_gals0;
-
-	return 0;
-
-err_disable_gals0:
-	clk_disable_unprepare(smi->clk_gals0);
-err_disable_smi:
-	clk_disable_unprepare(smi->clk_smi);
-err_disable_apb:
-	clk_disable_unprepare(smi->clk_apb);
-	return ret;
-}
-
-static void mtk_smi_clk_disable(const struct mtk_smi *smi)
-{
-	clk_disable_unprepare(smi->clk_gals1);
-	clk_disable_unprepare(smi->clk_gals0);
-	clk_disable_unprepare(smi->clk_smi);
-	clk_disable_unprepare(smi->clk_apb);
-}
-
 int mtk_smi_larb_get(struct device *larbdev)
 {
 	int ret = pm_runtime_resume_and_get(larbdev);

@@ -270,7 +239,6 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
-	.has_gals                   = true,
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
 				      /* IPU0 | IPU1 | CCU */

@@ -320,6 +288,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct device_node *smi_node;
 	struct platform_device *smi_pdev;
 	struct device_link *link;
+	int i, ret;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
 	if (!larb)

@@ -331,22 +300,14 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	if (IS_ERR(larb->base))
 		return PTR_ERR(larb->base);
 
-	larb->smi.clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(larb->smi.clk_apb))
-		return PTR_ERR(larb->smi.clk_apb);
-
-	larb->smi.clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(larb->smi.clk_smi))
-		return PTR_ERR(larb->smi.clk_smi);
-
-	if (larb->larb_gen->has_gals) {
-		/* The larbs may still haven't gals even if the SoC support.*/
-		larb->smi.clk_gals0 = devm_clk_get(dev, "gals");
-		if (PTR_ERR(larb->smi.clk_gals0) == -ENOENT)
-			larb->smi.clk_gals0 = NULL;
-		else if (IS_ERR(larb->smi.clk_gals0))
-			return PTR_ERR(larb->smi.clk_gals0);
-	}
+	larb->smi.clk_num = ARRAY_SIZE(mtk_smi_larb_clocks);
+	for (i = 0; i < larb->smi.clk_num; i++)
+		larb->smi.clks[i].id = mtk_smi_larb_clocks[i];
+
+	ret = devm_clk_bulk_get_optional(dev, larb->smi.clk_num, larb->smi.clks);
+	if (ret)
+		return ret;
+
 	larb->smi.dev = dev;
 
 	smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);

@@ -391,11 +352,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
 	int ret;
 
-	ret = mtk_smi_clk_enable(&larb->smi);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable clock(%d).\n", ret);
+	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);

@@ -407,7 +366,7 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 
-	mtk_smi_clk_disable(&larb->smi);
+	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
 	return 0;
 }

@@ -437,21 +396,18 @@ static const struct mtk_smi_common_plat mtk_smi_common_gen2 = {
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
 	.gen		= MTK_SMI_GEN2,
-	.has_gals	= true,
 	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
 			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 	.gen      = MTK_SMI_GEN2,
-	.has_gals = true,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.gen      = MTK_SMI_GEN2,
-	.has_gals = true,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(6),
 };

@@ -493,7 +449,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_smi *common;
 	struct resource *res;
-	int ret;
+	int i, ret;
 
 	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
 	if (!common)

@@ -501,23 +457,13 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	common->dev = dev;
 	common->plat = of_device_get_match_data(dev);
 
-	common->clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(common->clk_apb))
-		return PTR_ERR(common->clk_apb);
-
-	common->clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(common->clk_smi))
-		return PTR_ERR(common->clk_smi);
+	common->clk_num = ARRAY_SIZE(mtk_smi_common_clocks);
+	for (i = 0; i < common->clk_num; i++)
+		common->clks[i].id = mtk_smi_common_clocks[i];
 
-	if (common->plat->has_gals) {
-		common->clk_gals0 = devm_clk_get(dev, "gals0");
-		if (IS_ERR(common->clk_gals0))
-			return PTR_ERR(common->clk_gals0);
-
-		common->clk_gals1 = devm_clk_get(dev, "gals1");
-		if (IS_ERR(common->clk_gals1))
-			return PTR_ERR(common->clk_gals1);
-	}
+	ret = devm_clk_bulk_get_optional(dev, common->clk_num, common->clks);
+	if (ret)
+		return ret;
 
 	/*
 	 * for mtk smi gen 1, we need to get the ao(always on) base to config

@@ -561,11 +507,9 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 	u32 bus_sel = common->plat->bus_sel;
 	int ret;
 
-	ret = mtk_smi_clk_enable(common);
-	if (ret) {
-		dev_err(common->dev, "Failed to enable clock(%d).\n", ret);
+	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
+	if (ret)
 		return ret;
-	}
 
 	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);

@@ -576,7 +520,7 @@ static int __maybe_unused mtk_smi_common_suspend(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
 
-	mtk_smi_clk_disable(common);
+	clk_bulk_disable_unprepare(common->clk_num, common->clks);
 	return 0;
 }

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:44:43

This is a preparing patch for adding smi sub common.

About the previou smi_gen, we have gen1/gen2 that stand for the generation
number for HW. I plan to add a new type(sub_common), then the "gen" is not
prober. this patch only change it to "type", No functional change.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index bcd2bf130655..8eb39b46a6c8 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -55,7 +55,7 @@
 /* All are MMU0 defaultly. Only specialize mmu1 here. */
 #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
-enum mtk_smi_gen {
+enum mtk_smi_type {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2
 };

@@ -71,8 +71,8 @@ static const char * const mtk_smi_larb_clocks[] = {
 };
 
 struct mtk_smi_common_plat {
-	enum mtk_smi_gen gen;
-	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+	enum mtk_smi_type	type;
+	u32			bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
 };
 
 struct mtk_smi_larb_gen {

@@ -387,27 +387,27 @@ static struct platform_driver mtk_smi_larb_driver = {
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_gen1 = {
-	.gen = MTK_SMI_GEN1,
+	.type     = MTK_SMI_GEN1,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_gen2 = {
-	.gen = MTK_SMI_GEN2,
+	.type	  = MTK_SMI_GEN2,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
-	.gen		= MTK_SMI_GEN2,
-	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
-			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+	.type	  = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+		    F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
-	.gen      = MTK_SMI_GEN2,
+	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
-	.gen      = MTK_SMI_GEN2,
+	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(6),
 };

@@ -471,7 +471,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	 * clock into emi clock domain, but for mtk smi gen2, there's no smi ao
 	 * base.
 	 */
-	if (common->plat->gen == MTK_SMI_GEN1) {
+	if (common->plat->type == MTK_SMI_GEN1) {
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 		common->smi_ao_base = devm_ioremap_resource(dev, res);
 		if (IS_ERR(common->smi_ao_base))

@@ -511,7 +511,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
+	if (common->plat->type == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);
 	return 0;
 }

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/9] memory: mtk-smi: Adjust some code position

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:45:00

This patch has no functional change, Only move the code position to make
the code more readable.
1. Put the register smi-common above smi-larb. this is preparing to add
   many others register setting.
2. put mtk_smi_larb_bind near larb_unbind.
3. Sort the SoC data alphabetically.
   and put them in one line as the current kernel allow it.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 219 ++++++++++++++++-----------------------
 1 file changed, 90 insertions(+), 129 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 8eb39b46a6c8..6858877ac859 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -17,12 +17,15 @@
 #include <dt-bindings/memory/mt2701-larb-port.h>
 #include <dt-bindings/memory/mtk-memory-port.h>
 
-/* mt8173 */
-#define SMI_LARB_MMU_EN		0xf00
+/* SMI COMMON */
+#define SMI_BUS_SEL			0x220
+#define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
+/* All are MMU0 defaultly. Only specialize mmu1 here. */
+#define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
-/* mt8167 */
-#define MT8167_SMI_LARB_MMU_EN	0xfc0
+/* SMI LARB */
 
+/* Below are about mmu enable registers, they are different in SoCs */
 /* mt2701 */
 #define REG_SMI_SECUR_CON_BASE		0x5c0

@@ -41,20 +44,20 @@
 /* mt2701 domain should be set to 3 */
 #define SMI_SECUR_CON_VAL_DOMAIN(id)	(0x3 << ((((id) & 0x7) << 2) + 1))
 
-/* mt2712 */
-#define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
-#define F_MMU_EN		BIT(0)
-#define BANK_SEL(id)		({			\
+/* mt8167 */
+#define MT8167_SMI_LARB_MMU_EN		0xfc0
+
+/* mt8173 */
+#define MT8173_SMI_LARB_MMU_EN		0xf00
+
+/* larb gen2 */
+#define SMI_LARB_NONSEC_CON(id)		(0x380 + ((id) * 4))
+#define F_MMU_EN			BIT(0)
+#define BANK_SEL(id)			({		\
 	u32 _id = (id) & 0x3;				\
 	(_id << 8 | _id << 10 | _id << 12 | _id << 14);	\
 })
 
-/* SMI COMMON */
-#define SMI_BUS_SEL			0x220
-#define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
-/* All are MMU0 defaultly. Only specialize mmu1 here. */
-#define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
-
 enum mtk_smi_type {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2

@@ -117,55 +120,6 @@ void mtk_smi_larb_put(struct device *larbdev)
 }
 EXPORT_SYMBOL_GPL(mtk_smi_larb_put);
 
-static int
-mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
-{
-	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-	struct mtk_smi_larb_iommu *larb_mmu = data;
-	unsigned int         i;
-
-	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
-		if (dev == larb_mmu[i].dev) {
-			larb->larbid = i;
-			larb->mmu = &larb_mmu[i].mmu;
-			larb->bank = larb_mmu[i].bank;
-			return 0;
-		}
-	}
-	return -ENODEV;
-}
-
-static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
-{
-	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-	u32 reg;
-	int i;
-
-	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
-		return;
-
-	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
-		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
-		reg |= F_MMU_EN;
-		reg |= BANK_SEL(larb->bank[i]);
-		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
-	}
-}
-
-static void mtk_smi_larb_config_port_mt8173(struct device *dev)
-{
-	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-
-	writel(*larb->mmu, larb->base + SMI_LARB_MMU_EN);
-}
-
-static void mtk_smi_larb_config_port_mt8167(struct device *dev)
-{
-	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-
-	writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
-}
-
 static void mtk_smi_larb_config_port_gen1(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);

@@ -197,6 +151,55 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	}
 }
 
+static void mtk_smi_larb_config_port_mt8167(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+	writel(*larb->mmu, larb->base + MT8167_SMI_LARB_MMU_EN);
+}
+
+static void mtk_smi_larb_config_port_mt8173(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+
+	writel(*larb->mmu, larb->base + MT8173_SMI_LARB_MMU_EN);
+}
+
+static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	u32 reg;
+	int i;
+
+	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
+		return;
+
+	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
+		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
+		reg |= F_MMU_EN;
+		reg |= BANK_SEL(larb->bank[i]);
+		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
+	}
+}
+
+static int
+mtk_smi_larb_bind(struct device *dev, struct device *master, void *data)
+{
+	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
+	struct mtk_smi_larb_iommu *larb_mmu = data;
+	unsigned int         i;
+
+	for (i = 0; i < MTK_LARB_NR_MAX; i++) {
+		if (dev == larb_mmu[i].dev) {
+			larb->larbid = i;
+			larb->mmu = &larb_mmu[i].mmu;
+			larb->bank = larb_mmu[i].bank;
+			return 0;
+		}
+	}
+	return -ENODEV;
+}
+
 static void
 mtk_smi_larb_unbind(struct device *dev, struct device *master, void *data)
 {

@@ -208,16 +211,6 @@ static const struct component_ops mtk_smi_larb_component_ops = {
 	.unbind = mtk_smi_larb_unbind,
 };
 
-static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
-	/* mt8173 do not need the port in larb */
-	.config_port = mtk_smi_larb_config_port_mt8173,
-};
-
-static const struct mtk_smi_larb_gen mtk_smi_larb_mt8167 = {
-	/* mt8167 do not need the port in larb */
-	.config_port = mtk_smi_larb_config_port_mt8167,
-};
-
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
 	.port_in_larb = {
 		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,

@@ -238,6 +231,16 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
 		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8167 = {
+	/* mt8167 do not need the port in larb */
+	.config_port = mtk_smi_larb_config_port_mt8167,
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8173 = {
+	/* mt8173 do not need the port in larb */
+	.config_port = mtk_smi_larb_config_port_mt8173,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),

@@ -249,34 +252,13 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 };
 
 static const struct of_device_id mtk_smi_larb_of_ids[] = {
-	{
-		.compatible = "mediatek,mt8167-smi-larb",
-		.data = &mtk_smi_larb_mt8167
-	},
-	{
-		.compatible = "mediatek,mt8173-smi-larb",
-		.data = &mtk_smi_larb_mt8173
-	},
-	{
-		.compatible = "mediatek,mt2701-smi-larb",
-		.data = &mtk_smi_larb_mt2701
-	},
-	{
-		.compatible = "mediatek,mt2712-smi-larb",
-		.data = &mtk_smi_larb_mt2712
-	},
-	{
-		.compatible = "mediatek,mt6779-smi-larb",
-		.data = &mtk_smi_larb_mt6779
-	},
-	{
-		.compatible = "mediatek,mt8183-smi-larb",
-		.data = &mtk_smi_larb_mt8183
-	},
-	{
-		.compatible = "mediatek,mt8192-smi-larb",
-		.data = &mtk_smi_larb_mt8192
-	},
+	{.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
+	{.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},
+	{.compatible = "mediatek,mt6779-smi-larb", .data = &mtk_smi_larb_mt6779},
+	{.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167},
+	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
+	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
+	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
 	{}
 };

@@ -413,34 +395,13 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 };
 
 static const struct of_device_id mtk_smi_common_of_ids[] = {
-	{
-		.compatible = "mediatek,mt8173-smi-common",
-		.data = &mtk_smi_common_gen2,
-	},
-	{
-		.compatible = "mediatek,mt8167-smi-common",
-		.data = &mtk_smi_common_gen2,
-	},
-	{
-		.compatible = "mediatek,mt2701-smi-common",
-		.data = &mtk_smi_common_gen1,
-	},
-	{
-		.compatible = "mediatek,mt2712-smi-common",
-		.data = &mtk_smi_common_gen2,
-	},
-	{
-		.compatible = "mediatek,mt6779-smi-common",
-		.data = &mtk_smi_common_mt6779,
-	},
-	{
-		.compatible = "mediatek,mt8183-smi-common",
-		.data = &mtk_smi_common_mt8183,
-	},
-	{
-		.compatible = "mediatek,mt8192-smi-common",
-		.data = &mtk_smi_common_mt8192,
-	},
+	{.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
+	{.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt6779-smi-common", .data = &mtk_smi_common_mt6779},
+	{.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
+	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
+	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
 	{}
 };

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 7/9] memory: mtk-smi: mt8195: Add smi support

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:45:13

mt8195 has two smi-common. the IP are the same.
only the larbs that connect with the smi-common are different.
thus the bus_sel is different for the two smi-common.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index fa3a14605dc2..8b1bfef47ecd 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -286,6 +286,10 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 };
 
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
+	.config_port                = mtk_smi_larb_config_port_gen2_general,
+};
+
 static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt2701-smi-larb", .data = &mtk_smi_larb_mt2701},
 	{.compatible = "mediatek,mt2712-smi-larb", .data = &mtk_smi_larb_mt2712},

@@ -294,6 +298,7 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = {
 	{.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173},
 	{.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183},
 	{.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192},
+	{.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195},
 	{}
 };

@@ -408,6 +413,21 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 		    F_MMU1_LARB(6),
 };
 
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vdo = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(3) | F_MMU1_LARB(5) |
+		    F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vpp = {
+	.type     = MTK_SMI_GEN2,
+	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+};
+
+static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8195 = {
+	.type     = MTK_SMI_GEN2_SUB_COMM,
+};
+
 static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt2701-smi-common", .data = &mtk_smi_common_gen1},
 	{.compatible = "mediatek,mt2712-smi-common", .data = &mtk_smi_common_gen2},

@@ -416,6 +436,9 @@ static const struct of_device_id mtk_smi_common_of_ids[] = {
 	{.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2},
 	{.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183},
 	{.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192},
+	{.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo},
+	{.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
+	{.compatible = "mediatek,mt8195-smi-sub-common", .data = &mtk_smi_sub_common_mt8195},
 	{}
 };

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 6/9] memory: mtk-smi: Add smi sub common support

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:45:15

This patch adds smi-sub-common support. some larbs may connect with the
smi-sub-common, then connect with smi-common.

Before we create device link between smi-larb with smi-common, If we have
sub-common, we should use device link the smi-larb and smi-sub-common,
then use device link between the smi-sub-common with smi-common. This is
for enabling clock/power automatically.
Move the device link code to a new interface for reusing.

there is no SW extra setting for smi-sub-common.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 78 ++++++++++++++++++++++++++--------------
 1 file changed, 52 insertions(+), 26 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 6858877ac859..fa3a14605dc2 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -60,7 +60,8 @@
 
 enum mtk_smi_type {
 	MTK_SMI_GEN1,
-	MTK_SMI_GEN2
+	MTK_SMI_GEN2,		/* gen2 smi common */
+	MTK_SMI_GEN2_SUB_COMM,	/* gen2 smi sub common */
 };
 
 #define MTK_SMI_CLK_NR_MAX			4

@@ -93,13 +94,14 @@ struct mtk_smi {
 		void __iomem		*smi_ao_base; /* only for gen1 */
 		void __iomem		*base;	      /* only for gen2 */
 	};
+	struct device			*smi_common_dev; /* for sub common */
 	const struct mtk_smi_common_plat *plat;
 };
 
 struct mtk_smi_larb { /* larb: local arbiter */
 	struct mtk_smi			smi;
 	void __iomem			*base;
-	struct device			*smi_common_dev;
+	struct device			*smi_common_dev; /* common or sub-common dev */
 	const struct mtk_smi_larb_gen	*larb_gen;
 	int				larbid;
 	u32				*mmu;

@@ -206,6 +208,39 @@ mtk_smi_larb_unbind(struct device *dev, struct device *master, void *data)
 	/* Do nothing as the iommu is always enabled. */
 }
 
+static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev)
+{
+	struct platform_device *smi_com_pdev;
+	struct device_node *smi_com_node;
+	struct device *smi_com_dev;
+	struct device_link *link;
+
+	smi_com_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
+	if (!smi_com_node)
+		return -EINVAL;
+
+	smi_com_pdev = of_find_device_by_node(smi_com_node);
+	of_node_put(smi_com_node);
+	if (smi_com_pdev) {
+		/* smi common is the supplier, Make sure it is ready before */
+		if (!platform_get_drvdata(smi_com_pdev))
+			return -EPROBE_DEFER;
+		smi_com_dev = &smi_com_pdev->dev;
+		link = device_link_add(dev, smi_com_dev,
+				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
+		if (!link) {
+			dev_err(dev, "Unable to link smi-common dev\n");
+			return -ENODEV;
+		}
+		*com_dev = smi_com_dev;
+	} else {
+		dev_err(dev, "Failed to get the smi_common device\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static const struct component_ops mtk_smi_larb_component_ops = {
 	.bind = mtk_smi_larb_bind,
 	.unbind = mtk_smi_larb_unbind,

@@ -267,9 +302,6 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct mtk_smi_larb *larb;
 	struct resource *res;
 	struct device *dev = &pdev->dev;
-	struct device_node *smi_node;
-	struct platform_device *smi_pdev;
-	struct device_link *link;
 	int i, ret;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);

@@ -291,27 +323,9 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 		return ret;
 
 	larb->smi.dev = dev;
-
-	smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
-	if (!smi_node)
-		return -EINVAL;
-
-	smi_pdev = of_find_device_by_node(smi_node);
-	of_node_put(smi_node);
-	if (smi_pdev) {
-		if (!platform_get_drvdata(smi_pdev))
-			return -EPROBE_DEFER;
-		larb->smi_common_dev = &smi_pdev->dev;
-		link = device_link_add(dev, larb->smi_common_dev,
-				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
-		if (!link) {
-			dev_err(dev, "Unable to link smi-common dev\n");
-			return -ENODEV;
-		}
-	} else {
-		dev_err(dev, "Failed to get the smi_common device\n");
-		return -EINVAL;
-	}
+	ret = mtk_smi_device_link_common(dev, &larb->smi_common_dev);
+	if (ret < 0)
+		return ret;
 
 	pm_runtime_enable(dev);
 	platform_set_drvdata(pdev, larb);

@@ -451,6 +465,14 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 		if (IS_ERR(common->base))
 			return PTR_ERR(common->base);
 	}
+
+	/* link its smi-common if this is smi-sub-common */
+	if (common->plat->type == MTK_SMI_GEN2_SUB_COMM) {
+		ret = mtk_smi_device_link_common(dev, &common->smi_common_dev);
+		if (ret < 0)
+			return ret;
+	}
+
 	pm_runtime_enable(dev);
 	platform_set_drvdata(pdev, common);
 	return 0;

@@ -458,6 +480,10 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 
 static int mtk_smi_common_remove(struct platform_device *pdev)
 {
+	struct mtk_smi *common = dev_get_drvdata(&pdev->dev);
+
+	if (common->plat->type == MTK_SMI_GEN2_SUB_COMM)
+		device_link_remove(&pdev->dev, common->smi_common_dev);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 8/9] memory: mtk-smi: mt8195: Add initial setting for smi-common

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:45:17

To improve the performance, This patch adds initial setting for smi-common.
some register use some fix setting(suggested from DE).

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 42 ++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 8b1bfef47ecd..08b28e96fd8c 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -18,11 +18,19 @@
 #include <dt-bindings/memory/mtk-memory-port.h>
 
 /* SMI COMMON */
+#define SMI_L1LEN			0x100
+
 #define SMI_BUS_SEL			0x220
 #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
 /* All are MMU0 defaultly. Only specialize mmu1 here. */
 #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
+#define SMI_M4U_TH			0x234
+#define SMI_FIFO_TH1			0x238
+#define SMI_FIFO_TH2			0x23c
+#define SMI_DCM				0x300
+#define SMI_DUMMY			0x444
+
 /* SMI LARB */
 
 /* Below are about mmu enable registers, they are different in SoCs */

@@ -58,6 +66,13 @@
 	(_id << 8 | _id << 10 | _id << 12 | _id << 14);	\
 })
 
+#define SMI_COMMON_INIT_REGS_NR		6
+
+struct mtk_smi_reg_pair {
+	unsigned int		offset;
+	u32			value;
+};
+
 enum mtk_smi_type {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2,		/* gen2 smi common */

@@ -77,6 +92,8 @@ static const char * const mtk_smi_larb_clocks[] = {
 struct mtk_smi_common_plat {
 	enum mtk_smi_type	type;
 	u32			bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+
+	const struct mtk_smi_reg_pair	*init;
 };
 
 struct mtk_smi_larb_gen {

@@ -387,6 +404,15 @@ static struct platform_driver mtk_smi_larb_driver = {
 	}
 };
 
+static const struct mtk_smi_reg_pair mtk_smi_common_mt8195_init[SMI_COMMON_INIT_REGS_NR] = {
+	{SMI_L1LEN, 0xb},
+	{SMI_M4U_TH, 0xe100e10},
+	{SMI_FIFO_TH1, 0x506090a},
+	{SMI_FIFO_TH2, 0x506090a},
+	{SMI_DCM, 0x4f1},
+	{SMI_DUMMY, 0x1},
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_gen1 = {
 	.type     = MTK_SMI_GEN1,
 };

@@ -417,11 +443,13 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vdo = {
 	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(3) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8195_vpp = {
 	.type     = MTK_SMI_GEN2,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(7),
+	.init     = mtk_smi_common_mt8195_init,
 };
 
 static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8195 = {

@@ -514,15 +542,21 @@ static int mtk_smi_common_remove(struct platform_device *pdev)
 static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
-	u32 bus_sel = common->plat->bus_sel;
-	int ret;
+	const struct mtk_smi_reg_pair *init = common->plat->init;
+	u32 bus_sel = common->plat->bus_sel; /* default is 0 */
+	int ret, i;
 
 	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
 	if (ret)
 		return ret;
 
-	if (common->plat->type == MTK_SMI_GEN2 && bus_sel)
-		writel(bus_sel, common->base + SMI_BUS_SEL);
+	if (common->plat->type != MTK_SMI_GEN2)
+		return 0;
+
+	for (i = 0; i < SMI_COMMON_INIT_REGS_NR && init && init[i].offset; i++)
+		writel_relaxed(init[i].value, common->base + init[i].offset);
+
+	writel(bus_sel, common->base + SMI_BUS_SEL);
 	return 0;
 }

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 9/9] memory: mtk-smi: mt8195: Add initial setting for smi-larb

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-06-16 11:45:28

To improve the performance, We add some initial setting for smi larbs.
there are two part:
1), Each port has the special ostd(outstanding) value in each larb.
2), Two general setting for each larb.

In some SoC, this setting maybe changed dynamically for some special case
like 4K, and this initial setting is enough in mt8195.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 74 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 73 insertions(+), 1 deletion(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 08b28e96fd8c..33f497b58f7b 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -32,6 +32,14 @@
 #define SMI_DUMMY			0x444
 
 /* SMI LARB */
+#define SMI_LARB_CMD_THRT_CON		0x24
+#define SMI_LARB_THRT_EN		0x370256
+
+#define SMI_LARB_SW_FLAG		0x40
+#define SMI_LARB_SW_FLAG_1		0x1
+
+#define SMI_LARB_OSTDL_PORT		0x200
+#define SMI_LARB_OSTDL_PORTx(id)	(SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
 
 /* Below are about mmu enable registers, they are different in SoCs */
 /* mt2701 */

@@ -67,6 +75,11 @@
 })
 
 #define SMI_COMMON_INIT_REGS_NR		6
+#define SMI_LARB_PORT_NR_MAX		32
+
+#define MTK_SMI_FLAG_LARB_THRT_EN	BIT(0)
+#define MTK_SMI_FLAG_LARB_SW_FLAG	BIT(1)
+#define MTK_SMI_CAPS(flags, _x)		(!!((flags) & (_x)))
 
 struct mtk_smi_reg_pair {
 	unsigned int		offset;

@@ -100,6 +113,8 @@ struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
+	const u8			(*ostd)[SMI_LARB_PORT_NR_MAX];
+	unsigned int			flags_general;
 };
 
 struct mtk_smi {

@@ -187,12 +202,22 @@ static void mtk_smi_larb_config_port_mt8173(struct device *dev)
 static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
-	u32 reg;
+	u32 reg, flags_general = larb->larb_gen->flags_general;
+	const u8 *larbostd = larb->larb_gen->ostd[larb->larbid];
 	int i;
 
 	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
 		return;
 
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_THRT_EN))
+		writel_relaxed(SMI_LARB_THRT_EN, larb->base + SMI_LARB_CMD_THRT_CON);
+
+	if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_SW_FLAG))
+		writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG);
+
+	for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
+		writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
+
 	for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
 		reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
 		reg |= F_MMU_EN;

@@ -263,6 +288,51 @@ static const struct component_ops mtk_smi_larb_component_ops = {
 	.unbind = mtk_smi_larb_unbind,
 };
 
+static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = {
+	[0] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb0 */
+	[1] = {0x0a, 0xc, 0x22, 0x22, 0x01, 0x0a,}, /* larb1 */
+	[2] = {0x12, 0x12, 0x12, 0x12, 0x0a,},      /* ... */
+	[3] = {0x12, 0x12, 0x12, 0x12, 0x28, 0x28, 0x0a,},
+	[4] = {0x06, 0x01, 0x17, 0x06, 0x0a,},
+	[5] = {0x06, 0x01, 0x17, 0x06, 0x06, 0x01, 0x06, 0x0a,},
+	[6] = {0x06, 0x01, 0x06, 0x0a,},
+	[7] = {0x0c, 0x0c, 0x12,},
+	[8] = {0x0c, 0x0c, 0x12,},
+	[9] = {0x0a, 0x08, 0x04, 0x06, 0x01, 0x01, 0x10, 0x18, 0x11, 0x0a,
+		0x08, 0x04, 0x11, 0x06, 0x02, 0x06, 0x01, 0x11, 0x11, 0x06,},
+	[10] = {0x18, 0x08, 0x01, 0x01, 0x20, 0x12, 0x18, 0x06, 0x05, 0x10,
+		0x08, 0x08, 0x10, 0x08, 0x08, 0x18, 0x0c, 0x09, 0x0b, 0x0d,
+		0x0d, 0x06, 0x10, 0x10,},
+	[11] = {0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x0e, 0x01, 0x01, 0x01, 0x01,},
+	[12] = {0x09, 0x09, 0x05, 0x05, 0x0c, 0x18, 0x02, 0x02, 0x04, 0x02,},
+	[13] = {0x02, 0x02, 0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x08, 0x01,},
+	[14] = {0x12, 0x12, 0x02, 0x02, 0x02, 0x02, 0x16, 0x01, 0x16, 0x01,
+		0x01, 0x02, 0x02, 0x08, 0x02,},
+	[15] = {}, /* */
+	[16] = {0x28, 0x02, 0x02, 0x12, 0x02, 0x12, 0x10, 0x02, 0x02, 0x0a,
+		0x12, 0x02, 0x0a, 0x16, 0x02, 0x04,},
+	[17] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+	[18] = {0x12, 0x06, 0x12, 0x06,},
+	[19] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[20] = {0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x04, 0x01,
+		0x01, 0x01, 0x04, 0x0a, 0x06, 0x01, 0x01, 0x01, 0x0a, 0x06,
+		0x01, 0x01, 0x05, 0x03, 0x03, 0x04, 0x01,},
+	[21] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[22] = {0x28, 0x19, 0x0c, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04,},
+	[23] = {0x18, 0x01,},
+	[24] = {0x01, 0x01, 0x04, 0x01, 0x01, 0x01, 0x01, 0x01, 0x04, 0x01,
+		0x01, 0x01,},
+	[25] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[26] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[27] = {0x02, 0x02, 0x02, 0x28, 0x16, 0x02, 0x02, 0x02, 0x12, 0x16,
+		0x02, 0x01,},
+	[28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,},
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = {
 	.port_in_larb = {
 		LARB0_PORT_OFFSET, LARB1_PORT_OFFSET,

@@ -305,6 +375,8 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = {
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
+	.ostd		            = mtk_smi_larb_mt8195_ostd,
+	.flags_general	            = MTK_SMI_FLAG_LARB_THRT_EN | MTK_SMI_FLAG_LARB_SW_FLAG,
 };
 
 static const struct of_device_id mtk_smi_larb_of_ids[] = {

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-08 09:26:12

On 16/06/2021 13:43, Yong Wu wrote:

This patch adds mt8195 smi supporting in the bindings.

In mt8195, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connects with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.

Something like this:

    IOMMU(VDO)          IOMMU(VPP)
       |                   |
  SMI_COMMON_VDO      SMI_COMMON_VPP
  ---------------     ----------------
  |      |   ...      |      |     ...
larb0 larb2  ...    larb1 larb3    ...

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml    | 6 +++++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

I cannot find it on devicetree list, it seems you did not Cc it. Please
use scripts/get_maintainer.pl.


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-08 09:32:26

On 16/06/2021 13:43, Yong Wu wrote:

quoted hunk

smi have many clocks: apb/smi/gals.
This patch use clk_bulk interface instead of the orginal one to simply
the code.

gals is optional clk(some larbs may don't have gals). use clk_bulk_optional
instead. and then remove the has_gals flag.

Also remove clk fail logs since bulk interface already output fail log.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 124 +++++++++++----------------------------
 1 file changed, 34 insertions(+), 90 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..bcd2bf130655 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -60,9 +60,18 @@ enum mtk_smi_gen {
 	MTK_SMI_GEN2
 };
 
+#define MTK_SMI_CLK_NR_MAX			4
+
+static const char * const mtk_smi_common_clocks[] = {
+	"apb", "smi", "gals0", "gals1", /* glas is optional */

Typo here - glas.

quoted hunk

+};
+
+static const char * const mtk_smi_larb_clocks[] = {
+	"apb",  "smi", "gals"
+};
+
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
-	bool             has_gals;
 	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
 };

@@ -70,13 +79,12 @@ struct mtk_smi_larb_gen {
 	int port_in_larb[MTK_LARB_NR_MAX + 1];
 	void (*config_port)(struct device *dev);
 	unsigned int			larb_direct_to_common_mask;
-	bool				has_gals;
 };
 
 struct mtk_smi {
 	struct device			*dev;
-	struct clk			*clk_apb, *clk_smi;
-	struct clk			*clk_gals0, *clk_gals1;
+	unsigned int			clk_num;
+	struct clk_bulk_data		clks[MTK_SMI_CLK_NR_MAX];
 	struct clk			*clk_async; /*only needed by mt2701*/
 	union {
 		void __iomem		*smi_ao_base; /* only for gen1 */
@@ -95,45 +103,6 @@ struct mtk_smi_larb { /* larb: local arbiter */
 	unsigned char			*bank;
 };
 
-static int mtk_smi_clk_enable(const struct mtk_smi *smi)
-{
-	int ret;
-
-	ret = clk_prepare_enable(smi->clk_apb);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(smi->clk_smi);
-	if (ret)
-		goto err_disable_apb;
-
-	ret = clk_prepare_enable(smi->clk_gals0);
-	if (ret)
-		goto err_disable_smi;
-
-	ret = clk_prepare_enable(smi->clk_gals1);
-	if (ret)
-		goto err_disable_gals0;
-
-	return 0;
-
-err_disable_gals0:
-	clk_disable_unprepare(smi->clk_gals0);
-err_disable_smi:
-	clk_disable_unprepare(smi->clk_smi);
-err_disable_apb:
-	clk_disable_unprepare(smi->clk_apb);
-	return ret;
-}
-
-static void mtk_smi_clk_disable(const struct mtk_smi *smi)
-{
-	clk_disable_unprepare(smi->clk_gals1);
-	clk_disable_unprepare(smi->clk_gals0);
-	clk_disable_unprepare(smi->clk_smi);
-	clk_disable_unprepare(smi->clk_apb);
-}
-
 int mtk_smi_larb_get(struct device *larbdev)
 {
 	int ret = pm_runtime_resume_and_get(larbdev);
@@ -270,7 +239,6 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
 };
 
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
-	.has_gals                   = true,
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
 	.larb_direct_to_common_mask = BIT(2) | BIT(3) | BIT(7),
 				      /* IPU0 | IPU1 | CCU */
@@ -320,6 +288,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	struct device_node *smi_node;
 	struct platform_device *smi_pdev;
 	struct device_link *link;
+	int i, ret;
 
 	larb = devm_kzalloc(dev, sizeof(*larb), GFP_KERNEL);
 	if (!larb)
@@ -331,22 +300,14 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
 	if (IS_ERR(larb->base))
 		return PTR_ERR(larb->base);
 
-	larb->smi.clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(larb->smi.clk_apb))
-		return PTR_ERR(larb->smi.clk_apb);
-
-	larb->smi.clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(larb->smi.clk_smi))
-		return PTR_ERR(larb->smi.clk_smi);
-
-	if (larb->larb_gen->has_gals) {
-		/* The larbs may still haven't gals even if the SoC support.*/
-		larb->smi.clk_gals0 = devm_clk_get(dev, "gals");
-		if (PTR_ERR(larb->smi.clk_gals0) == -ENOENT)
-			larb->smi.clk_gals0 = NULL;
-		else if (IS_ERR(larb->smi.clk_gals0))
-			return PTR_ERR(larb->smi.clk_gals0);
-	}
+	larb->smi.clk_num = ARRAY_SIZE(mtk_smi_larb_clocks);
+	for (i = 0; i < larb->smi.clk_num; i++)
+		larb->smi.clks[i].id = mtk_smi_larb_clocks[i];
+
+	ret = devm_clk_bulk_get_optional(dev, larb->smi.clk_num, larb->smi.clks);
+	if (ret)
+		return ret;
+
 	larb->smi.dev = dev;
 
 	smi_node = of_parse_phandle(dev->of_node, "mediatek,smi", 0);
@@ -391,11 +352,9 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev)
 	const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen;
 	int ret;
 
-	ret = mtk_smi_clk_enable(&larb->smi);
-	if (ret < 0) {
-		dev_err(dev, "Failed to enable clock(%d).\n", ret);
+	ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* Configure the basic setting for this larb */
 	larb_gen->config_port(dev);
@@ -407,7 +366,7 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 {
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 
-	mtk_smi_clk_disable(&larb->smi);
+	clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks);
 	return 0;
 }
 
@@ -437,21 +396,18 @@ static const struct mtk_smi_common_plat mtk_smi_common_gen2 = {
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
 	.gen		= MTK_SMI_GEN2,
-	.has_gals	= true,
 	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
 			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 	.gen      = MTK_SMI_GEN2,
-	.has_gals = true,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(7),
 };
 
 static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = {
 	.gen      = MTK_SMI_GEN2,
-	.has_gals = true,
 	.bus_sel  = F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(5) |
 		    F_MMU1_LARB(6),
 };
@@ -493,7 +449,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_smi *common;
 	struct resource *res;
-	int ret;
+	int i, ret;
 
 	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
 	if (!common)
@@ -501,23 +457,13 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	common->dev = dev;
 	common->plat = of_device_get_match_data(dev);
 
-	common->clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(common->clk_apb))
-		return PTR_ERR(common->clk_apb);
-
-	common->clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(common->clk_smi))
-		return PTR_ERR(common->clk_smi);
+	common->clk_num = ARRAY_SIZE(mtk_smi_common_clocks);
+	for (i = 0; i < common->clk_num; i++)
+		common->clks[i].id = mtk_smi_common_clocks[i];
 
-	if (common->plat->has_gals) {
-		common->clk_gals0 = devm_clk_get(dev, "gals0");
-		if (IS_ERR(common->clk_gals0))
-			return PTR_ERR(common->clk_gals0);
-
-		common->clk_gals1 = devm_clk_get(dev, "gals1");
-		if (IS_ERR(common->clk_gals1))
-			return PTR_ERR(common->clk_gals1);
-	}
+	ret = devm_clk_bulk_get_optional(dev, common->clk_num, common->clks);
+	if (ret)
+		return ret;

How do you handle now missing required clocks?

quoted hunk

 
 	/*
 	 * for mtk smi gen 1, we need to get the ao(always on) base to config

@@ -561,11 +507,9 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 	u32 bus_sel = common->plat->bus_sel;
 	int ret;
 
-	ret = mtk_smi_clk_enable(common);
-	if (ret) {
-		dev_err(common->dev, "Failed to enable clock(%d).\n", ret);
+	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
+	if (ret)
 		return ret;
-	}
 
 	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);
@@ -576,7 +520,7 @@ static int __maybe_unused mtk_smi_common_suspend(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
 
-	mtk_smi_clk_disable(common);
+	clk_bulk_disable_unprepare(common->clk_num, common->clks);
 	return 0;
 }
 


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-08 09:34:11

On 16/06/2021 13:43, Yong Wu wrote:

This is a preparing patch for adding smi sub common.

Don't write "This patch". Use simple imperative:
"Prepare for adding smi sub common."

https://elixir.bootlin.com/linux/v5.13/source/Documentation/process/submitting-patches.rst#L89

About the previou smi_gen, we have gen1/gen2 that stand for the generation
number for HW. I plan to add a new type(sub_common), then the "gen" is not
prober. this patch only change it to "type", No functional change.

Same.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 6/9] memory: mtk-smi: Add smi sub common support

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-08 09:47:20

On 16/06/2021 13:43, Yong Wu wrote:

This patch adds smi-sub-common support. some larbs may connect with the
smi-sub-common, then connect with smi-common.

Please start sentences with capital letter. This (similarly to "This
patch") appears in multiple patches.

Before we create device link between smi-larb with smi-common, If we have
sub-common, we should use device link the smi-larb and smi-sub-common,
then use device link between the smi-sub-common with smi-common. This is
for enabling clock/power automatically.
Move the device link code to a new interface for reusing.

there is no SW extra setting for smi-sub-common.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 78 ++++++++++++++++++++++++++--------------
 1 file changed, 52 insertions(+), 26 deletions(-)


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/9] dt-bindings: memory: mediatek: Add mt8195 smi binding

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-07-11 08:35:17

On Thu, 2021-07-08 at 11:26 +0200, Krzysztof Kozlowski wrote:

On 16/06/2021 13:43, Yong Wu wrote:

quoted

This patch adds mt8195 smi supporting in the bindings.

In mt8195, there are two smi-common HW, one is for vdo(video output),
the other is for vpp(video processing pipe). They connects with different
smi-larbs, then some setting(bus_sel) is different. Differentiate them
with the compatible string.

Something like this:

    IOMMU(VDO)          IOMMU(VPP)
       |                   |
  SMI_COMMON_VDO      SMI_COMMON_VPP
  ---------------     ----------------
  |      |   ...      |      |     ...
larb0 larb2  ...    larb1 larb3    ...

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml    | 6 +++++-
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 3 +++
 2 files changed, 8 insertions(+), 1 deletion(-)

I cannot find it on devicetree list, it seems you did not Cc it. Please
use scripts/get_maintainer.pl.

My fault. I will add in the next version.


Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 4/9] memory: mtk-smi: Rename smi_gen to smi_type

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-07-11 08:35:17

On Thu, 2021-07-08 at 11:34 +0200, Krzysztof Kozlowski wrote:

On 16/06/2021 13:43, Yong Wu wrote:

quoted

This is a preparing patch for adding smi sub common.

Don't write "This patch". Use simple imperative:
"Prepare for adding smi sub common."

https://elixir.bootlin.com/linux/v5.13/source/Documentation/process/submitting-patches.rst#L89

Thanks very much. I didn't notice this before.

quoted

About the previou smi_gen, we have gen1/gen2 that stand for the generation
number for HW. I plan to add a new type(sub_common), then the "gen" is not
prober. this patch only change it to "type", No functional change.

Same.

quoted

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

Best regards,
Krzysztof

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops

From: Yong Wu <yong.wu@mediatek.com>
Date: 2021-07-11 08:35:17

On Thu, 2021-07-08 at 11:32 +0200, Krzysztof Kozlowski wrote:

On 16/06/2021 13:43, Yong Wu wrote:

quoted

smi have many clocks: apb/smi/gals.
This patch use clk_bulk interface instead of the orginal one to simply
the code.

gals is optional clk(some larbs may don't have gals). use clk_bulk_optional
instead. and then remove the has_gals flag.

Also remove clk fail logs since bulk interface already output fail log.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 124 +++++++++++----------------------------
 1 file changed, 34 insertions(+), 90 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..bcd2bf130655 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -60,9 +60,18 @@ enum mtk_smi_gen {
 	MTK_SMI_GEN2
 };
 
+#define MTK_SMI_CLK_NR_MAX			4
+
+static const char * const mtk_smi_common_clocks[] = {
+	"apb", "smi", "gals0", "gals1", /* glas is optional */

Typo here - glas.

Will Fix. Thanks.

quoted
+};
+

[snip]

quoted

@@ -493,7 +449,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_smi *common;
 	struct resource *res;
-	int ret;
+	int i, ret;
 
 	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
 	if (!common)
@@ -501,23 +457,13 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	common->dev = dev;
 	common->plat = of_device_get_match_data(dev);
 
-	common->clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(common->clk_apb))
-		return PTR_ERR(common->clk_apb);
-
-	common->clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(common->clk_smi))
-		return PTR_ERR(common->clk_smi);
+	common->clk_num = ARRAY_SIZE(mtk_smi_common_clocks);
+	for (i = 0; i < common->clk_num; i++)
+		common->clks[i].id = mtk_smi_common_clocks[i];
 
-	if (common->plat->has_gals) {
-		common->clk_gals0 = devm_clk_get(dev, "gals0");
-		if (IS_ERR(common->clk_gals0))
-			return PTR_ERR(common->clk_gals0);
-
-		common->clk_gals1 = devm_clk_get(dev, "gals1");
-		if (IS_ERR(common->clk_gals1))
-			return PTR_ERR(common->clk_gals1);
-	}
+	ret = devm_clk_bulk_get_optional(dev, common->clk_num, common->clks);
+	if (ret)
+		return ret;

How do you handle now missing required clocks?

It looks this is a common issue for this function which supports all the
clocks could be optional. Is there common suggestion for this?

For our case, the apb/smi clocks are required while "gals" are optional.

thus, we should use devm_clk_bulk_get for the necessary clocks and
devm_clk_bulk_get_optional for the optional ones. right?

quoted

 
 	/*
 	 * for mtk smi gen 1, we need to get the ao(always on) base to config

@@ -561,11 +507,9 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 	u32 bus_sel = common->plat->bus_sel;
 	int ret;
 
-	ret = mtk_smi_clk_enable(common);
-	if (ret) {
-		dev_err(common->dev, "Failed to enable clock(%d).\n", ret);
+	ret = clk_bulk_prepare_enable(common->clk_num, common->clks);
+	if (ret)
 		return ret;
-	}
 
 	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);
@@ -576,7 +520,7 @@ static int __maybe_unused mtk_smi_common_suspend(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
 
-	mtk_smi_clk_disable(common);
+	clk_bulk_disable_unprepare(common->clk_num, common->clks);
 	return 0;
 }
 


Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/9] memory: mtk-smi: Use clk_bulk instead of the clk ops

From: Krzysztof Kozlowski <hidden>
Date: 2021-07-12 07:18:22

On 11/07/2021 10:29, Yong Wu wrote:

On Thu, 2021-07-08 at 11:32 +0200, Krzysztof Kozlowski wrote:

quoted

On 16/06/2021 13:43, Yong Wu wrote:

quoted

smi have many clocks: apb/smi/gals.
This patch use clk_bulk interface instead of the orginal one to simply
the code.

gals is optional clk(some larbs may don't have gals). use clk_bulk_optional
instead. and then remove the has_gals flag.

Also remove clk fail logs since bulk interface already output fail log.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/memory/mtk-smi.c | 124 +++++++++++----------------------------
 1 file changed, 34 insertions(+), 90 deletions(-)

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index c5fb51f73b34..bcd2bf130655 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c

@@ -60,9 +60,18 @@ enum mtk_smi_gen {
 	MTK_SMI_GEN2
 };
 
+#define MTK_SMI_CLK_NR_MAX			4
+
+static const char * const mtk_smi_common_clocks[] = {
+	"apb", "smi", "gals0", "gals1", /* glas is optional */

Typo here - glas.

Will Fix. Thanks.

quoted

quoted
+};
+

[snip]

quoted

@@ -493,7 +449,7 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_smi *common;
 	struct resource *res;
-	int ret;
+	int i, ret;
 
 	common = devm_kzalloc(dev, sizeof(*common), GFP_KERNEL);
 	if (!common)
@@ -501,23 +457,13 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
 	common->dev = dev;
 	common->plat = of_device_get_match_data(dev);
 
-	common->clk_apb = devm_clk_get(dev, "apb");
-	if (IS_ERR(common->clk_apb))
-		return PTR_ERR(common->clk_apb);
-
-	common->clk_smi = devm_clk_get(dev, "smi");
-	if (IS_ERR(common->clk_smi))
-		return PTR_ERR(common->clk_smi);
+	common->clk_num = ARRAY_SIZE(mtk_smi_common_clocks);
+	for (i = 0; i < common->clk_num; i++)
+		common->clks[i].id = mtk_smi_common_clocks[i];
 
-	if (common->plat->has_gals) {
-		common->clk_gals0 = devm_clk_get(dev, "gals0");
-		if (IS_ERR(common->clk_gals0))
-			return PTR_ERR(common->clk_gals0);
-
-		common->clk_gals1 = devm_clk_get(dev, "gals1");
-		if (IS_ERR(common->clk_gals1))
-			return PTR_ERR(common->clk_gals1);
-	}
+	ret = devm_clk_bulk_get_optional(dev, common->clk_num, common->clks);
+	if (ret)
+		return ret;

How do you handle now missing required clocks?

It looks this is a common issue for this function which supports all the
clocks could be optional. Is there common suggestion for this?

For our case, the apb/smi clocks are required while "gals" are optional.

thus, we should use devm_clk_bulk_get for the necessary clocks and
devm_clk_bulk_get_optional for the optional ones. right?

Yes, I think that's the solution. Otherwise you might not have proper
clocks leading to accesses to disabled/gated hardware.

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help