[PATCH v4] thermal: mediatek: add sensors-support
Subsystems:
the rest , thermal
1859d
LANDED
Landed in mainline as 24e21d9f40ec on 2021-07-04.
4 messages,
4 authors,
2021-06-28 · open the first message on its own page
From: Frank Wunderlich <redacted>
add HWMON-support to mediateks thermal driver to allow lm-sensors
userspace tools read soc temperature
Signed-off-by: Frank Wunderlich <redacted>
---
v4: change message to dev_warn as suggested by matthias
v3: drop no_hwmon
v2: drop ifdef and used devm_thermal_add_hwmon_sysfs
---
drivers/thermal/mtk_thermal.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 97e8678ccf0e..ede94eadddda 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c @@ -23,6 +23,8 @@
#include <linux/reset.h>
#include <linux/types.h>
+ #include "thermal_hwmon.h" + /* AUXADC Registers */
#define AUXADC_CON1_SET_V 0x008
#define AUXADC_CON1_CLR_V 0x00c @@ -1087,6 +1089,10 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_peri_therm ;
}
+ ret = devm_thermal_add_hwmon_sysfs ( tzdev ); + if ( ret ) + dev_warn ( & pdev -> dev , "error in thermal_add_hwmon_sysfs" ); + return 0 ;
err_disable_clk_peri_therm : --
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 08/06/2021 17:45, Frank Wunderlich wrote: From: Frank Wunderlich <redacted>
add HWMON-support to mediateks thermal driver to allow lm-sensors
userspace tools read soc temperature
Signed-off-by: Frank Wunderlich <redacted>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
quoted hunk ---
v4: change message to dev_warn as suggested by matthias
v3: drop no_hwmon
v2: drop ifdef and used devm_thermal_add_hwmon_sysfs
---
drivers/thermal/mtk_thermal.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 97e8678ccf0e..ede94eadddda 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c @@ -23,6 +23,8 @@
#include <linux/reset.h>
#include <linux/types.h>
+ #include "thermal_hwmon.h" + /* AUXADC Registers */
#define AUXADC_CON1_SET_V 0x008
#define AUXADC_CON1_CLR_V 0x00c @@ -1087,6 +1089,10 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_peri_therm ;
}
+ ret = devm_thermal_add_hwmon_sysfs ( tzdev ); + if ( ret ) + dev_warn ( & pdev -> dev , "error in thermal_add_hwmon_sysfs" ); + return 0 ;
err_disable_clk_peri_therm :
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Hi,
A gentle ping as it is reviewed but not yet visible in thermal tree [1] i guess it should do,right?
regards Frank
[1] https://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git/log/?h=thermal/next
Gesendet: Mittwoch, 09. Juni 2021 um 10:09 Uhr
Von: "Matthias Brugger" [off-list ref]
An: "Frank Wunderlich" [off-list ref], linux-mediatek@lists.infradead.org
Cc: "Frank Wunderlich" <redacted>, "Daniel Lezcano" <redacted>, "Amit Kucheria" <amitk@kernel.org>, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Betreff: Re: [PATCH v4] thermal: mediatek: add sensors-support
On 08/06/2021 17:45, Frank Wunderlich wrote: quoted From: Frank Wunderlich <redacted>
add HWMON-support to mediateks thermal driver to allow lm-sensors
userspace tools read soc temperature
Signed-off-by: Frank Wunderlich <redacted>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
quoted ---
v4: change message to dev_warn as suggested by matthias
v3: drop no_hwmon
v2: drop ifdef and used devm_thermal_add_hwmon_sysfs
---
drivers/thermal/mtk_thermal.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 97e8678ccf0e..ede94eadddda 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c @@ -23,6 +23,8 @@
#include <linux/reset.h>
#include <linux/types.h>
+ #include "thermal_hwmon.h" + /* AUXADC Registers */
#define AUXADC_CON1_SET_V 0x008
#define AUXADC_CON1_CLR_V 0x00c @@ -1087,6 +1089,10 @@ static int mtk_thermal_probe(struct platform_device *pdev)
goto err_disable_clk_peri_therm ;
}
+ ret = devm_thermal_add_hwmon_sysfs ( tzdev ); + if ( ret ) + dev_warn ( & pdev -> dev , "error in thermal_add_hwmon_sysfs" ); + return 0 ;
err_disable_clk_peri_therm :
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On 28/06/2021 12:05, Frank Wunderlich wrote: Hi,
A gentle ping as it is reviewed but not yet visible in thermal tree [1] i guess it should do,right?
Right, I thought I took it.
Fixed, thanks for the heads up.
--
<http://www.linaro.org/ > Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro > Facebook |
<http://twitter.com/#!/linaroorg > Twitter |
<http://www.linaro.org/linaro-blog/ > Blog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel