[PATCH] ARM: dts: ixp4xx: Add ethernet
From: Linus Walleij <hidden>
Date: 2021-05-10 11:20:17
Subsystem:
the rest · Maintainer:
Linus Torvalds
This adds ethernet to the IXP4xx device trees. Cc: Zoltan HERPAI <redacted> Cc: Raylynn Knight <redacted> Signed-off-by: Linus Walleij <redacted> --- ChangeLog v1->v2: - Adapt to the changes adding the proper MDIO bus and phy references in the nodes. - Use phandle for reference the NPE --- .../boot/dts/intel-ixp42x-linksys-nslu2.dts | 19 ++++++++ .../dts/intel-ixp43x-gateworks-gw2358.dts | 19 ++++++++ arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi | 44 +++++++++++++++++++ arch/arm/boot/dts/intel-ixp4xx.dtsi | 24 +++++++++- 4 files changed, 105 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
index 8fcd95805ff4..8cacf035dc32 100644
--- a/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts@@ -106,4 +106,23 @@ partitions { fis-index-block = <0x3f>; }; }; + + soc { + ethernet@c8009000 { + status = "ok"; + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; };
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
index ba1163a1e1e7..f89d41b496ab 100644
--- a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts
+++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts@@ -91,4 +91,23 @@ partitions { fis-index-block = <0xff>; }; }; + + soc { + ethernet@c800a000 { + status = "ok"; + queue-rx = <&qmgr 4>; + queue-txready = <&qmgr 21>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + }; };
diff --git a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
index f8cd506659dc..ef3696e369b8 100644
--- a/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi@@ -30,5 +30,49 @@ i2c@c8011000 { interrupts = <33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + /* This is known as EthA */ + ethernet@c800c000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800c000 0x1000>; + status = "disabled"; + intel,npe = <0>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB1 */ + ethernet@c800d000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800d000 0x1000>; + status = "disabled"; + intel,npe = <1>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB2 */ + ethernet@c800e000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800e000 0x1000>; + status = "disabled"; + intel,npe = <2>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; + + /* This is known as EthB3 */ + ethernet@c800f000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800f000 0x1000>; + status = "disabled"; + intel,npe = <3>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + }; }; };
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi
index d4a09584f417..b3de0501cf6f 100644
--- a/arch/arm/boot/dts/intel-ixp4xx.dtsi
+++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi@@ -61,9 +61,31 @@ timer@c8005000 { interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; }; - npe@c8006000 { + npe: npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; }; + + /* This is known as EthB */ + ethernet@c8009000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc8009000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + intel,npe-handle = <&npe 1>; + }; + + /* This is known as EthC */ + ethernet@c800a000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800a000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + intel,npe-handle = <&npe 2>; + }; }; };
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel