From: Ikjoon Jang <hidden> Date: 2021-05-14 12:21:44
Adding a cbas support for kukui platforms which has a tablet mode
switch through cros-ec interface.
---
Sorry for resending v7, I found some CCs were missing
and errata in email addresses.
Changes in v7:
- remove a label in cbas node in mt8183-kukui.dtsi
- fix an erratum in commit message (table --> tablet)
- dt-binding patche merged altogether with mt8183 dts
Changes in v6:
- Remove a label for cbas node in a example of dt-binding doc
Changes in v5:
- Add missing blank lines and change the description property's position.
- Add a note to description: "this device cannot be detected at runtime."
Changes in v4:
- Define cros-cbase bindings inside google,cros-ec.yaml instead of
a separated binding document.
Ikjoon Jang (2):
mfd: google,cros-ec: add DT bindings for a baseboard's switch device
arm64: dts: mt8183: add cbas node under cros_ec
.../bindings/mfd/google,cros-ec.yaml | 20 +++++++++++++++++++
.../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
2 files changed, 24 insertions(+)
--
2.31.1.751.gd2f1c929bd-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
From: Ikjoon Jang <hidden> Date: 2021-05-14 12:21:49
This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.
Signed-off-by: Ikjoon Jang <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <redacted>
---
Changes in v7:
- no changes from v6
Changes in v6:
- Remove a label for cbas node in a example
Changes in v5:
- Add missing blank lines and change the description property's position.
- Add a note to description: "this device cannot be detected at runtime."
Changes in v4:
Define cros-cbase bindings inside google,cros-ec.yaml instead of
a separated binding document.
.../bindings/mfd/google,cros-ec.yaml | 20 +++++++++++++++++++
1 file changed, 20 insertions(+)
@@ -114,6 +114,22 @@ properties:-"#address-cells"-"#size-cells"+cbas:+type:object++description:+This device is used to signal when a detachable base is attached+to a Chrome OS tablet. This device cannot be detected at runtime.++properties:+compatible:+const:google,cros-cbas++required:+-compatible++additionalProperties:false+patternProperties:"^i2c-tunnel[0-9]*$":type:object
From: Ikjoon Jang <hidden> Date: 2021-05-14 12:21:54
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <redacted>
---
Changes in v7:
- remove a label in cbas node
- fix an erratum in commit message (table --> tablet)
- dt-binding patchess merged altogether with mt8183 dts
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
1 file changed, 4 insertions(+)
From: Enric Balletbo i Serra <hidden> Date: 2021-05-14 13:23:51
Hi Ikjoon,
Thank you for the patch.
On 14/5/21 14:20, Ikjoon Jang wrote:
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <redacted>
Reviewed-by: Enric Balletbo i Serra <redacted>
quoted hunk
---
Changes in v7:
- remove a label in cbas node
- fix an erratum in commit message (table --> tablet)
- dt-binding patchess merged altogether with mt8183 dts
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
1 file changed, 4 insertions(+)
From: Stephen Boyd <hidden> Date: 2021-05-17 22:42:43
Quoting Ikjoon Jang (2021-05-14 05:20:49)
This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.
Signed-off-by: Ikjoon Jang <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <redacted>
---
From: Stephen Boyd <hidden> Date: 2021-05-17 22:43:08
Quoting Ikjoon Jang (2021-05-14 05:20:50)
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <redacted>
---
From: Enric Balletbo i Serra <hidden> Date: 2021-05-20 09:41:54
Hi Ikjoon,
Thank you for the patch.
On 14/5/21 14:20, Ikjoon Jang wrote:
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.
Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).
Signed-off-by: Ikjoon Jang <redacted>
Reviewed-by: Enric Balletbo i Serra <redacted>
quoted hunk
---
Changes in v7:
- remove a label in cbas node
- fix an erratum in commit message (table --> tablet)
- dt-binding patchess merged altogether with mt8183 dts
arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
1 file changed, 4 insertions(+)