[PATCH v4 0/4] convert grf.txt to YAML

@@ -1,32 +0,0 @@
-Rockchip RK3328 GRF (General Register Files) GPIO controller.
-
-In Rockchip RK3328, the output only GPIO_MUTE pin, originally for codec mute
-control, can also be used for general purpose. It is manipulated by the
-GRF_SOC_CON10 register in GRF. Aside from the GPIO_MUTE pin, the HDMI pins can
-also be set in the same way.
-
-Currently this GPIO controller only supports the mute pin. If needed in the
-future, the HDMI pins support can also be added.
-
-Required properties:
-- compatible: Should contain "rockchip,rk3328-grf-gpio".
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2. The first cell is the pin number and
-  the second cell is used to specify the gpio polarity:
-    0 = Active high,
-    1 = Active low.
-
-Example:
-
-	grf: syscon@ff100000 {
-		compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd";
-
-		grf_gpio: grf-gpio {
-			compatible = "rockchip,rk3328-grf-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-Note: The grf_gpio node should be declared as the child of the GRF (General
-Register File) node. The GPIO_MUTE pin is referred to as <&grf_gpio 0>.

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3328 General Register Files GPIO controller
+
+description:
+  The Rockchip RK3328 General Register File (GRF) outputs only the
+  GPIO_MUTE pin, originally for codec mute control, but it can also be used
+  for general purpose. It is manipulated by the GRF_SOC_CON10 register.
+  If needed in the future support for the HDMI pins can also be added.
+  The GPIO node should be declared as the child of the GRF node.
+
+  The GPIO_MUTE pin is referred to in the format
+
+  <&grf_gpio 0 GPIO_ACTIVE_LOW>
+
+  The first cell is the pin number and
+  the second cell is used to specify the GPIO polarity
+    0 = Active high
+    1 = Active low
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    const: rockchip,rk3328-grf-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    grf_gpio: gpio {
+      compatible = "rockchip,rk3328-grf-gpio";
+      gpio-controller;
+      #gpio-cells = <2>;
+    };
+

@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
-   - "rockchip,px30-grf", "syscon": for px30
-   - "rockchip,rk3036-grf", "syscon": for rk3036
-   - "rockchip,rk3066-grf", "syscon": for rk3066
-   - "rockchip,rk3188-grf", "syscon": for rk3188
-   - "rockchip,rk3228-grf", "syscon": for rk3228
-   - "rockchip,rk3288-grf", "syscon": for rk3288
-   - "rockchip,rk3308-grf", "syscon": for rk3308
-   - "rockchip,rk3328-grf", "syscon": for rk3328
-   - "rockchip,rk3368-grf", "syscon": for rk3368
-   - "rockchip,rk3399-grf", "syscon": for rk3399
-   - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
-   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
-   - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
-   - "rockchip,px30-pmugrf", "syscon": for px30
-   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
-   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
-   - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
-   - "rockchip,px30-usb2phy-grf", "syscon": for px30
-   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
-   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-	};

@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3288-sgrf
+              - rockchip,rv1108-pmugrf
+              - rockchip,rv1108-usbgrf
+          - const: syscon
+      - items:
+          - enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3036-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3308-core-grf
+              - rockchip,rk3308-detect-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-grf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-grf
+
+    then:
+      properties:
+        lvds:
+          description:
+            Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-grf
+
+    then:
+      properties:
+        edp-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+        usbphy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-grf
+
+    then:
+      properties:
+        gpio:
+          type: object
+
+          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+          unevaluatedProperties: false
+
+        power-controller:
+          type: object
+
+          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-grf
+
+    then:
+      properties:
+        mipi-dphy-rx0:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+          unevaluatedProperties: false
+
+        pcie-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+      patternProperties:
+        "phy@[0-9a-f]+$":
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,rk3036-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3368-pmugrf
+
+    then:
+      properties:
+        reboot-mode:
+          type: object
+
+          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3399-grf
+              - rockchip,rv1108-grf
+
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+
+      patternProperties:
+        "usb2-phy@[0-9a-f]+$":
+          type: object
+
+          $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,px30-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3368-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3399-grf
+
+    then:
+      properties:
+        io-domains:
+          description:
+            Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    grf: syscon@ff770000 {
+      compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+      reg = <0xff770000 0x10000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+      };
+
+      u2phy0: usb2-phy@e450 {
+        compatible = "rockchip,rk3399-usb2phy";
+        reg = <0xe450 0x10>;
+        clocks = <&cru SCLK_USB2PHY0_REF>;
+        clock-names = "phyclk";
+        #clock-cells = <0>;
+        clock-output-names = "clk_usbphy0_480m";
+        #phy-cells = <0>;
+
+        u2phy0_host: host-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "linestate";
+         };
+
+        u2phy0_otg: otg-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "otg-bvalid", "otg-id",
+                            "linestate";
+        };
+      };
+    };

@@ -256,7 +256,7 @@
 	};
 
 	grf: grf@20008000 {
-		compatible = "syscon";
+		compatible = "rockchip,rk3066-grf", "syscon";
 		reg = <0x20008000 0x200>;
 	};
 

@@ -291,7 +291,7 @@
 			status = "disabled";
 		};
 
-		grf_gpio: grf-gpio {
+		grf_gpio: gpio {
 			compatible = "rockchip,rk3328-grf-gpio";
 			gpio-controller;
 			#gpio-cells = <2>;