'disable-gpio' is not a valid property according to
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/boot/dts/imx7d-mba7.dts | 1 -
1 file changed, 1 deletion(-)
'disable-gpio' is not a valid property according to
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
arch/arm/boot/dts/imx6qdl-emcon.dtsi | 1 -
1 file changed, 1 deletion(-)
From: Bruno Thomsen <hidden> Date: 2021-03-03 20:10:26
Den tir. 2. mar. 2021 kl. 15.54 skrev Fabio Estevam [off-list ref]:
'disable-gpio' is not a valid property according to
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
On Tue, 2021-03-02 at 11:53 -0300, Fabio Estevam wrote:
'disable-gpio' is not a valid property according to
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Matthias Schiffer <redacted>
This is a remnant of linux-imx, which supports the property. On the
MBa7x (and likely other boards in linux-imx that use this), the GPIO is
connected to mPCIe pin 20 (wireless_disable#). Is there an intended way
to control this pin, or should it just be left unconfigured or hogged?
power-on-gpio seems to be obsolete too, I can't even find it in current
linux-imx, except for one other i.MX7D-based DTS. I can send a patch to
remove that as well, but it might take a while until I get to it.
On Wed, Mar 03, 2021 at 10:38:08AM +0100, Matthias Schiffer wrote:
On Tue, 2021-03-02 at 11:53 -0300, Fabio Estevam wrote:
quoted
'disable-gpio' is not a valid property according to
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt.
Remove the unsupported property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Matthias Schiffer <redacted>
This is a remnant of linux-imx, which supports the property. On the
MBa7x (and likely other boards in linux-imx that use this), the GPIO is
connected to mPCIe pin 20 (wireless_disable#). Is there an intended way
to control this pin, or should it just be left unconfigured or hogged?
power-on-gpio seems to be obsolete too, I can't even find it in current
linux-imx, except for one other i.MX7D-based DTS. I can send a patch to
remove that as well, but it might take a while until I get to it.
Fabio,
While we are at it, could you resend to include 'power-on-gpio' cleanup
as well?
Shawn
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel