[PATCH] ARM: dts: exynos: Add front camera support to I9100

Subsystems: the rest

STALE1953d

2 messages, 2 authors, 2021-03-26 · open the first message on its own page

[PATCH] ARM: dts: exynos: Add front camera support to I9100

From: Timon Baetz <hidden>
Date: 2021-03-26 16:26:46

Add node for Samsung S5K5BAF CMOS image sensor and
enable the associated MIPI CSI-2 receiver node.

Signed-off-by: Timon Baetz <redacted>
---
 arch/arm/boot/dts/exynos4210-i9100.dts | 52 ++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 228de6d8c9d1..d31146c08b84 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -147,6 +147,36 @@ battery@36 {
 		};
 	};

+	i2c_s5k5baf: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		s5k5bafx@2d {
+			compatible = "samsung,s5k5baf";
+			reg = <0x2d>;
+			vdda-supply = <&cam_io_en_reg>;
+			vddreg-supply = <&vt_core_15v_reg>;
+			vddio-supply = <&vtcam_reg>;
+			clocks = <&camera 0>;
+			clock-names = "mclk";
+			stbyn-gpios = <&gpl2 0 1>;
+			rstn-gpios = <&gpl2 1 1>;
+			clock-frequency = <24000000>;
+
+			port {
+				s5k5bafx_ep: endpoint {
+					remote-endpoint = <&csis1_ep>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+
 	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
@@ -220,7 +250,11 @@ pmic_ap_clk: pmic-ap-clk {
 };

 &camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
 	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
 };

 &cpu0 {
@@ -794,3 +828,21 @@ &serial_3 {
 &tmu {
 	status = "okay";
 };
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	clock-frequency = <160000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&s5k5bafx_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <6>;
+		};
+	};
+};
--
2.25.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] ARM: dts: exynos: Add front camera support to I9100

From: Krzysztof Kozlowski <krzk@kernel.org>
Date: 2021-03-26 16:41:24

On 26/03/2021 17:25, Timon Baetz wrote:
quoted hunk
Add node for Samsung S5K5BAF CMOS image sensor and
enable the associated MIPI CSI-2 receiver node.

Signed-off-by: Timon Baetz <redacted>
---
 arch/arm/boot/dts/exynos4210-i9100.dts | 52 ++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 228de6d8c9d1..d31146c08b84 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -147,6 +147,36 @@ battery@36 {
 		};
 	};

+	i2c_s5k5baf: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		s5k5bafx@2d {
The node name should be generic, so "image-sensor".
+			compatible = "samsung,s5k5baf";
+			reg = <0x2d>;
+			vdda-supply = <&cam_io_en_reg>;
+			vddreg-supply = <&vt_core_15v_reg>;
+			vddio-supply = <&vtcam_reg>;
+			clocks = <&camera 0>;
+			clock-names = "mclk";
+			stbyn-gpios = <&gpl2 0 1>;
GPIO_ACTIVE_LOW
+			rstn-gpios = <&gpl2 1 1>;
+			clock-frequency = <24000000>;
+

Best regards,
Krzysztof

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help