[PATCH 0/2] AM642-sk: Add support for USB

STALE1960d

4 messages, 2 authors, 2021-03-19 · open the first message on its own page

[PATCH 0/2] AM642-sk: Add support for USB

From: Aswath Govindraju <hidden>
Date: 2021-03-19 08:01:42

The following series of patches add support for,
- single one lane SERDES present in AM64
- USB super-speed port on AM642-sk

USB test logs,
https://pastebin.ubuntu.com/p/4RT9Y94fPv/

The following patches depend on,
1) - https://lore.kernel.org/linux-devicetree/20210310112745.3445-1-kishon@ti.com/
     binding additions and given below is an immutable tag  provided by
     Vinod Koul [off-list ref] (one of the Maintainers of GENERIC PHY
     FRAMEWORK) after applying them,

     git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
     tags/ti-serdes-for-5.13

2) - https://patchwork.kernel.org/project/linux-phy/list/?series=445371
     Serdes driver changes required for USB super-speed functionality.

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-am64: Add SERDES DT node
  arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port

 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 52 ++++++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am642-sk.dts   | 39 ++++++++++++++++++
 2 files changed, 91 insertions(+)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port

From: Aswath Govindraju <hidden>
Date: 2021-03-19 08:01:42

From: Kishon Vijay Abraham I <redacted>

Enable USB Super-Speed HOST port.

Signed-off-by: Kishon Vijay Abraham I <redacted>
Signed-off-by: Aswath Govindraju <redacted>
---
 arch/arm64/boot/dts/ti/k3-am642-sk.dts | 39 ++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 3a5bee4b0b0c..f193ec630d18 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts

@@ -5,6 +5,8 @@
 
 /dts-v1/;
 
+#include <dt-bindings/mux/ti-serdes.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include "k3-am642.dtsi"

@@ -85,6 +87,12 @@
 		>;
 	};
 
+	main_usb0_pins_default: main-usb0-pins-default {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
+		>;
+	};
+
 	main_i2c1_pins_default: main-i2c1-pins-default {
 		pinctrl-single,pins = <
 			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */

@@ -230,6 +238,37 @@
 	disable-wp;
 };
 
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_USB>;
+};
+
+&serdes_wiz0 {
+	status = "okay";
+};
+
+&serdes0 {
+	serdes0_usb_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usb0 {
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb0_pins_default>;
+	phys = <&serdes0_usb_link>;
+	phy-names = "cdns3,usb3-phy";
+};
+
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio1_pins_default

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/2] arm64: dts: ti: k3-am64: Add SERDES DT node

From: Aswath Govindraju <hidden>
Date: 2021-03-19 08:01:42

From: Kishon Vijay Abraham I <redacted>

Add SERDES DT node for the single one lane SERDES present in
AM64.

Signed-off-by: Kishon Vijay Abraham I <redacted>
Signed-off-by: Aswath Govindraju <redacted>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 52 ++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a03b66456062..5a62a96c048c 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi

@@ -5,6 +5,17 @@
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/phy/phy-cadence-torrent.h>
+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: serdes-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+};
+
 &cbass_main {
 	oc_sram: sram@70000000 {
 		compatible = "mmio-sram";

@@ -184,6 +195,12 @@
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
 		};
+
+		serdes_ln_ctrl: mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+		};
 	};
 
 	main_uart0: serial@2800000 {

@@ -477,6 +494,41 @@
 		};
 	};
 
+	serdes_wiz0: wiz@f000000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+		assigned-clocks = <&k3_clks 162 1>;
+		assigned-clock-parents = <&k3_clks 162 5>;
+
+		serdes0: serdes@f000000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f000000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 162 1>,
+						 <&k3_clks 162 1>,
+						 <&k3_clks 162 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+		};
+	};
+
 	cpts@39000000 {
 		compatible = "ti,j721e-cpts";
 		reg = <0x0 0x39000000 0x0 0x400>;

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] arm64: dts: ti: k3-am64: Add SERDES DT node

From: Kishon Vijay Abraham I <hidden>
Date: 2021-03-19 14:31:03

Hi Aswath,

On 19/03/21 1:30 pm, Aswath Govindraju wrote:

quoted hunk

From: Kishon Vijay Abraham I <redacted>

Add SERDES DT node for the single one lane SERDES present in
AM64.

Signed-off-by: Kishon Vijay Abraham I <redacted>
Signed-off-by: Aswath Govindraju <redacted>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 52 ++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index a03b66456062..5a62a96c048c 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi

@@ -5,6 +5,17 @@
  * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/phy/phy-cadence-torrent.h>

One of my patches in other series which renames the header file will
cause issues here :-/
http://lore.kernel.org/r/20210319124128.13308-9-kishon@ti.com

We'll need a immutable tag for this as well.

+#include <dt-bindings/phy/phy-ti.h>
+
+/ {
+	serdes_refclk: serdes-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};

Clock frequency of serdes_refclk depends on how it is tied in the EVM.
In the case of AM64EVM there is no external clock generator.

It should be something like in
https://github.com/kishon/linux-wip/commit/e5196b0819d334ce8a21b398b7c47557a145d250

Thanks
Kishon

quoted hunk

+};
+
 &cbass_main {
 	oc_sram: sram@70000000 {
 		compatible = "mmio-sram";

@@ -184,6 +195,12 @@
 			reg = <0x4044 0x8>;
 			#phy-cells = <1>;
 		};
+
+		serdes_ln_ctrl: mux {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
+		};
 	};
 
 	main_uart0: serial@2800000 {
@@ -477,6 +494,41 @@
 		};
 	};
 
+	serdes_wiz0: wiz@f000000 {
+		compatible = "ti,am64-wiz-10g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		num-lanes = <1>;
+		#reset-cells = <1>;
+		#clock-cells = <1>;
+		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
+		assigned-clocks = <&k3_clks 162 1>;
+		assigned-clock-parents = <&k3_clks 162 5>;
+
+		serdes0: serdes@f000000 {
+			compatible = "ti,j721e-serdes-10g";
+			reg = <0x0f000000 0x00010000>;
+			reg-names = "torrent_phy";
+			resets = <&serdes_wiz0 0>;
+			reset-names = "torrent_reset";
+			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
+			clock-names = "refclk", "phy_en_refclk";
+			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
+					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
+			assigned-clock-parents = <&k3_clks 162 1>,
+						 <&k3_clks 162 1>,
+						 <&k3_clks 162 1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+		};
+	};
+
 	cpts@39000000 {
 		compatible = "ti,j721e-cpts";
 		reg = <0x0 0x39000000 0x0 0x400>;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help