From: Martin Kepplinger <hidden> Date: 2021-02-19 10:06:10
From: Guido Günther <agx@sigxcpu.org>
IMX8MQ_AUDIO_PLL1 and IMX8MQ_AUDIO_PLL2 are setup to the same rates
right on the clock controller.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <redacted>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 --
1 file changed, 2 deletions(-)
From: Martin Kepplinger <hidden> Date: 2021-02-19 10:06:24
From: Guido Günther <agx@sigxcpu.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <redacted>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
From: Martin Kepplinger <hidden> Date: 2021-02-19 10:06:32
From: Angus Ainslie <redacted>
These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <redacted>
Signed-off-by: Martin Kepplinger <redacted>
---
.../boot/dts/freescale/imx8mq-librem5.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
From: Martin Kepplinger <hidden> Date: 2021-02-19 10:07:37
On Birch I can never reach 220 and hence the display would never
turn off. Tests suggest 120 to be a good threshold value for all Birch
devices.
Signed-off-by: Martin Kepplinger <redacted>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
From: Krzysztof Kozlowski <krzk@kernel.org> Date: 2021-02-20 19:15:13
On Fri, Feb 19, 2021 at 11:04:38AM +0100, Martin Kepplinger wrote:
From: Angus Ainslie <redacted>
These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <redacted>
Signed-off-by: Martin Kepplinger <redacted>
---
.../boot/dts/freescale/imx8mq-librem5.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
On Fri, Feb 19, 2021 at 11:04:34AM +0100, Martin Kepplinger wrote:
Angus Ainslie (1):
arm64: dts: librem5: protect some partitions of the nor-flash
Guido Günther (3):
arm64: dts: imx8mq-librem5-devkit: Drop buck3 startup-ramp-delay
arm64: dts: librem5: Drop assigned-clocks from SAI2
arm64: defconfig: Enable devfreq support for i.MX8MQ
Martin Kepplinger (1):
arm64: dts: imx8mq-librem5-r2: set nearlevel to 120
On Fri, Feb 19, 2021 at 11:04:38AM +0100, Martin Kepplinger wrote:
quoted hunk
From: Angus Ainslie <redacted>
These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <redacted>
Signed-off-by: Martin Kepplinger <redacted>
---
.../boot/dts/freescale/imx8mq-librem5.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)