From: Martin Kepplinger <hidden> Date: 2021-02-17 11:21:30
From: Angus Ainslie <redacted>
These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <redacted>
Signed-off-by: Martin Kepplinger <redacted>
---
.../arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
From: Martin Kepplinger <hidden> Date: 2021-02-17 11:21:57
From: Guido Günther <agx@sigxcpu.org>
IMX8MQ_AUDIO_PLL1 and IMX8MQ_AUDIO_PLL2 are setup to the same rates
right on the clock controller.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <redacted>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 --
1 file changed, 2 deletions(-)
From: Martin Kepplinger <hidden> Date: 2021-02-17 11:22:08
From: Guido Günther <agx@sigxcpu.org>
This is needed to make DRAM frequency scaling via devfreq as used
on the Librem 5 and Librem 5 Devkit.
With the interconnect support enabled we now need imx devfreq on top
to make this work.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Martin Kepplinger <redacted>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/configs/defconfig | 2 ++
1 file changed, 2 insertions(+)
From: Martin Kepplinger <hidden> Date: 2021-02-17 11:23:05
On Birch I can never reach 220 and hence the display would never
turn off. Tests suggest 120 to be a good threshold value for all Birch
devices.
Signed-off-by: Martin Kepplinger <redacted>
---
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
From: Krzysztof Kozlowski <krzk@kernel.org> Date: 2021-02-17 11:58:19
On Wed, Feb 17, 2021 at 12:19:43PM +0100, Martin Kepplinger wrote:
quoted hunk
From: Angus Ainslie <redacted>
These sections should be read only as they contain important data.
Signed-off-by: Angus Ainslie <redacted>
Signed-off-by: Martin Kepplinger <redacted>
---
.../arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
Drop the leading 0 in address and size. I saw some DTS using it but it's
not the common format. All nodes don't lead with 0 so why partitions are
different?
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel