# Re: \[PATCH v2 02/25\] dt-bindings: arm: apple: Add bindings for Apple ARM platforms

- From: Hector Martin \<hidden\>
- Date: 2021-02-16 14:31:25 
- List: linux-arm-kernel
- Page: https://ratatoskr.run/linux-arm-kernel/2021/02/6271152
- Thread: https://ratatoskr.run/linux-arm-kernel/2021/02/6270012/t.md

```text
On 16/02/2021 02.48, Krzysztof Kozlowski wrote:
> On Mon, Feb 15, 2021 at 09:16:50PM +0900, Hector Martin wrote:
>> +description: |
>> +  Apple ARM ("Apple Silicon") platforms should contain compatible strings
>> +  in the following format:
>> +
>> +  - apple,j274 (board/device ID)
>> +  - apple,m1 (SoC name)
>> +  - apple,arm-platform (Apple Silicon)
>
> This description is irrelevant because the rules come from schema below.
> Maybe instead write few words about the platform? Or describe how to get
> the board/device ID if it is not obvious?

Good point. Actually, I've gone back and forth over this a few times,
but I'm going to change the SoC name. Apple calls these things by 5
different names, but the only two that make any sense to consider are
the marketing name ("m1") and the SoC name ("t8103"). I'm going to
switch to the latter (so `apple,t8103`).

In the past, Apple have dual-sourced SoCs with different IDs under the
same marketing name, and Apple themselves name most of their compatible
properties after the lowest-compatible SoC name, so I'm going to go with
that after all. This will save us grief in the future if they do that
again, and I think I get to pick the color of this bike shed :)

Given that, I expanded a bit on the description. Let me know what you think:

description: |
  ARM platforms using SoCs designed by Apple Inc., branded "Apple Silicon".

  This currently includes devices based on the "M1" SoC, starting with the
  three Mac models released in late 2020:

  - Mac mini (M1, 2020)
  - MacBook Pro (13-inch, M1, 2020)
  - MacBook Air (M1, 2020)

  The compatible property should follow this format:

  compatible = "apple,<targettype>", "apple,<socid>", "apple,arm-platform";

  <targettype> represents the board/device and comes from the `target-type`
  property of the root node of the Apple Device Tree, lowercased. It can be
  queried on macOS using the following command:

  $ ioreg -d2 -l | grep target-type

  <socid> is the lowercased SoC ID. Apple uses at least *five* different
  names for their SoCs:

  - Marketing name ("M1")
  - Internal name ("H13G")
  - Codename ("Tonga")
  - SoC ID ("T8103")
  - Package/IC part number ("APL1102")

  Devicetrees should use the the lowercased SoC ID, to avoid confusion if
  multiple SoCs share the same marketing name. This can be obtained from
  the `compatible` property of the arm-io node of the Apple Device Tree,
  which can be queried as follows on macOS:

  $ ioreg -n arm-io | grep compatible

-- 
Hector Martin (marcan@marcan.st)
Public Key: https://mrcn.st/pub

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
```
