[PATCH] drivers/perf: Replace spin_lock_irqsave to spin_lock

Subsystems: applied micro (apm) x-gene soc pmu, arm pmu profiling and debugging, the rest

STALE2020d LANDED

Landed in mainline as 8ee37e0f97ec on 2021-02-10.

2 messages, 2 authors, 2021-02-12 · open the first message on its own page

[PATCH] drivers/perf: Replace spin_lock_irqsave to spin_lock

From: Qi Liu <hidden>
Date: 2021-02-09 09:48:32

There is no need to do spin_lock_irqsave in context of hard IRQ, so
replace them with spin_lock.

Signed-off-by: Qi Liu <redacted>
---
 drivers/perf/arm-cci.c   | 5 ++---
 drivers/perf/xgene_pmu.c | 5 ++---
 2 files changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/perf/arm-cci.c b/drivers/perf/arm-cci.c
index a75cf77..f81e2ec 100644
--- a/drivers/perf/arm-cci.c
+++ b/drivers/perf/arm-cci.c
@@ -1026,12 +1026,11 @@ static void pmu_event_set_period(struct perf_event *event)

 static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
 {
-	unsigned long flags;
 	struct cci_pmu *cci_pmu = dev;
 	struct cci_pmu_hw_events *events = &cci_pmu->hw_events;
 	int idx, handled = IRQ_NONE;

-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
+	raw_spin_lock(&events->pmu_lock);

 	/* Disable the PMU while we walk through the counters */
 	__cci_pmu_disable(cci_pmu);
@@ -1061,7 +1060,7 @@ static irqreturn_t pmu_handle_irq(int irq_num, void *dev)

 	/* Enable the PMU and sync possibly overflowed counters */
 	__cci_pmu_enable_sync(cci_pmu);
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+	raw_spin_unlock(&events->pmu_lock);

 	return IRQ_RETVAL(handled);
 }
diff --git a/drivers/perf/xgene_pmu.c b/drivers/perf/xgene_pmu.c
index 633cf07..44faa51 100644
--- a/drivers/perf/xgene_pmu.c
+++ b/drivers/perf/xgene_pmu.c
@@ -1234,10 +1234,9 @@ static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
 	u32 intr_mcu, intr_mcb, intr_l3c, intr_iob;
 	struct xgene_pmu_dev_ctx *ctx;
 	struct xgene_pmu *xgene_pmu = dev_id;
-	unsigned long flags;
 	u32 val;

-	raw_spin_lock_irqsave(&xgene_pmu->lock, flags);
+	raw_spin_lock(&xgene_pmu->lock);

 	/* Get Interrupt PMU source */
 	val = readl(xgene_pmu->pcppmu_csr + PCPPMU_INTSTATUS_REG);
@@ -1273,7 +1272,7 @@ static irqreturn_t xgene_pmu_isr(int irq, void *dev_id)
 		}
 	}

-	raw_spin_unlock_irqrestore(&xgene_pmu->lock, flags);
+	raw_spin_unlock(&xgene_pmu->lock);

 	return IRQ_HANDLED;
 }
--
2.8.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH] drivers/perf: Replace spin_lock_irqsave to spin_lock

From: Will Deacon <will@kernel.org>
Date: 2021-02-12 15:10:45

On Tue, 9 Feb 2021 17:42:22 +0800, Qi Liu wrote:
There is no need to do spin_lock_irqsave in context of hard IRQ, so
replace them with spin_lock.
Applied to will (for-next/perf), thanks!

[1/1] drivers/perf: Replace spin_lock_irqsave to spin_lock
      https://git.kernel.org/will/c/8ee37e0f97ec

Cheers,
-- 
Will

https://fixes.arm64.dev
https://next.arm64.dev
https://will.arm64.dev

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help