[PATCH 0/3] Few ti-sysc changes for v5.12 merge window

DORMANTno replies

4 messages, 1 author, 2021-01-26 · open the first message on its own page

[PATCH 0/3] Few ti-sysc changes for v5.12 merge window

From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 17:35:51

Hi,

Here are few ti-sysc changes to mostly to have l4_wkup and l4_cfg
interconnects before l4_per interconnects.

Regards,

Tony

Tony Lindgren (3):
  bus: ti-sysc: Fix initializing module_pa for modules without sysc
    register
  bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first
  bus: ti-sysc: Detect more modules for debugging

 drivers/bus/ti-sysc.c | 62 ++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 59 insertions(+), 3 deletions(-)

-- 
2.30.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] bus: ti-sysc: Fix initializing module_pa for modules without sysc register

From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 11:15:01

We have interconnect target modules with no known registers using only
clocks and resets, but we still want to detect them based on the module
IO range. So let's call sysc_parse_and_check_child_range() earlier so we
have module_pa properly initialized.

Fixes: 2928135c93f8 ("bus: ti-sysc: Support modules without control registers")
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c

@@ -856,15 +856,15 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
 	struct device_node *np = ddata->dev->of_node;
 	int error;
 
-	if (!of_get_property(np, "reg", NULL))
-		return 0;
-
 	error = sysc_parse_and_check_child_range(ddata);
 	if (error)
 		return error;
 
 	sysc_check_children(ddata);
 
+	if (!of_get_property(np, "reg", NULL))
+		return 0;
+
 	error = sysc_parse_registers(ddata);
 	if (error)
 		return error;

-- 
2.30.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] bus: ti-sysc: Probe for l4_wkup and l4_cfg interconnect devices first

From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 17:35:51

We want to probe l4_wkup and l4_cfg interconnect devices first to avoid
issues with missing resources. Otherwise we attempt to probe l4_per
devices first causing pointless deferred probe and also annoyingh
renumbering of the MMC devices for example.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 49 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c

@@ -635,6 +635,51 @@ static int sysc_parse_and_check_child_range(struct sysc *ddata)
 	return 0;
 }
 
+/* Interconnect instances to probe before l4_per instances */
+static struct resource early_bus_ranges[] = {
+	/* am3/4 l4_wkup */
+	{ .start = 0x44c00000, .end = 0x44c00000 + 0x300000, },
+	/* omap4/5 and dra7 l4_cfg */
+	{ .start = 0x4a000000, .end = 0x4a000000 + 0x300000, },
+	/* omap4 l4_wkup */
+	{ .start = 0x4a300000, .end = 0x4a300000 + 0x30000,  },
+	/* omap5 and dra7 l4_wkup without dra7 dcan segment */
+	{ .start = 0x4ae00000, .end = 0x4ae00000 + 0x30000,  },
+};
+
+static atomic_t sysc_defer = ATOMIC_INIT(10);
+
+/**
+ * sysc_defer_non_critical - defer non_critical interconnect probing
+ * @ddata: device driver data
+ *
+ * We want to probe l4_cfg and l4_wkup interconnect instances before any
+ * l4_per instances as l4_per instances depend on resources on l4_cfg and
+ * l4_wkup interconnects.
+ */
+static int sysc_defer_non_critical(struct sysc *ddata)
+{
+	struct resource *res;
+	int i;
+
+	if (!atomic_read(&sysc_defer))
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(early_bus_ranges); i++) {
+		res = &early_bus_ranges[i];
+		if (ddata->module_pa >= res->start &&
+		    ddata->module_pa <= res->end) {
+			atomic_set(&sysc_defer, 0);
+
+			return 0;
+		}
+	}
+
+	atomic_dec_if_positive(&sysc_defer);
+
+	return -EPROBE_DEFER;
+}
+
 static struct device_node *stdout_path;
 
 static void sysc_init_stdout_path(struct sysc *ddata)

@@ -860,6 +905,10 @@ static int sysc_map_and_check_registers(struct sysc *ddata)
 	if (error)
 		return error;
 
+	error = sysc_defer_non_critical(ddata);
+	if (error)
+		return error;
+
 	sysc_check_children(ddata);
 
 	if (!of_get_property(np, "reg", NULL))

-- 
2.30.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] bus: ti-sysc: Detect more modules for debugging

From: Tony Lindgren <tony@atomide.com>
Date: 2021-01-26 17:35:51

We want to see what the interconnect target module names are for
debugging.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c

@@ -1496,12 +1496,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("dwc3", 0, 0, 0x10, -ENODEV, 0x500a0200, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0b6000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("d2d", 0x4a0cd000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("elm", 0x48080000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
+	SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x40441403, 0xffff0fff, 0),
+	SYSC_QUIRK("emif", 0, 0, -ENODEV, -ENODEV, 0x50440500, 0xffffffff, 0),
 	SYSC_QUIRK("epwmss", 0, 0, 0x4, -ENODEV, 0x47400001, 0xffffffff, 0),
 	SYSC_QUIRK("gpu", 0, 0x1fc00, 0x1fc10, -ENODEV, 0, 0, 0),
 	SYSC_QUIRK("gpu", 0, 0xfe00, 0xfe10, -ENODEV, 0x40000000 , 0xffffffff, 0),
 	SYSC_QUIRK("hdmi", 0, 0, 0x10, -ENODEV, 0x50031d00, 0xffffffff, 0),
 	SYSC_QUIRK("hsi", 0, 0, 0x10, 0x14, 0x50043101, 0xffffffff, 0),
 	SYSC_QUIRK("iss", 0, 0, 0x10, -ENODEV, 0x40000101, 0xffffffff, 0),
+	SYSC_QUIRK("keypad", 0x4a31c000, 0, 0x10, 0x14, 0x00000020, 0xffffffff, 0),
 	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44306302, 0xffffffff, 0),
 	SYSC_QUIRK("mcasp", 0, 0, 0x4, -ENODEV, 0x44307b02, 0xffffffff, 0),
 	SYSC_QUIRK("mcbsp", 0, -ENODEV, 0x8c, -ENODEV, 0, 0, 0),

@@ -1513,11 +1517,14 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
 	SYSC_QUIRK("ocp2scp", 0, 0, -ENODEV, -ENODEV, 0x50060007, 0xffffffff, 0),
 	SYSC_QUIRK("padconf", 0, 0, 0x10, -ENODEV, 0x4fff0800, 0xffffffff, 0),
 	SYSC_QUIRK("padconf", 0, 0, -ENODEV, -ENODEV, 0x40001100, 0xffffffff, 0),
+	SYSC_QUIRK("pcie", 0x51000000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
+	SYSC_QUIRK("pcie", 0x51800000, -ENODEV, -ENODEV, -ENODEV, 0, 0, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000100, 0xffffffff, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x00004102, 0xffffffff, 0),
 	SYSC_QUIRK("prcm", 0, 0, -ENODEV, -ENODEV, 0x40000400, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x4832a800, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
 	SYSC_QUIRK("rfbi", 0x58002000, 0, 0x10, 0x14, 0x00000010, 0xffffffff, 0),
+	SYSC_QUIRK("sata", 0, 0xfc, 0x1100, -ENODEV, 0x5e412000, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, 0x10, -ENODEV, 0x40000900, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4e8b0100, 0xffffffff, 0),
 	SYSC_QUIRK("scm", 0, 0, -ENODEV, -ENODEV, 0x4f000100, 0xffffffff, 0),

-- 
2.30.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help