# \[PATCH\] net: dsa: mt7530: remove unneeded semicolon - From: trix@redhat.com - Date: 2020-10-31 15:31:06 - List: linux-arm-kernel - Page: https://ratatoskr.run/linux-arm-kernel/2020/10/6159154 - Thread: https://ratatoskr.run/netdev/2020/10/6159154/t.md ```text From: Tom Rix A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix --- drivers/net/dsa/mt7530.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index de7692b763d8..771f58f50d61 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -558,7 +558,7 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) val |= 0x190000 << RG_COREPLL_SDM_PCW_S; mt7530_write(priv, MT7531_PLLGP_CR0, val); break; - }; + } /* Set feedback divide ratio update signal to high */ val = mt7530_read(priv, MT7531_PLLGP_CR0); -- 2.18.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ```