# \[PATCH v2 05/11\] media: exynos4-is: Properly set JPEG options for parallel ports - From: Jonathan Bakker \ - Date: 2020-07-30 23:02:07 - List: linux-arm-kernel - Page: https://ratatoskr.run/linux-arm-kernel/2020/07/6055968 - Thread: https://ratatoskr.run/linux-media/2020/07/6055968/t.md ```text Commit ee7160e57c98 ("[media] s5p-fimc: Add support for JPEG capture") added support for JPEG capture, but missed setting a register when the parallel port was used rather than the CSIS device. Signed-off-by: Jonathan Bakker Reviewed-by: Sylwester Nawrocki --- Changes from v1: - Re-wording commit message - Add R-b tag --- drivers/media/platform/exynos4-is/fimc-reg.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/platform/exynos4-is/fimc-reg.c b/drivers/media/platform/exynos4-is/fimc-reg.c index 5ce2bdebd424..269a98fca1e8 100644 --- a/drivers/media/platform/exynos4-is/fimc-reg.c +++ b/drivers/media/platform/exynos4-is/fimc-reg.c @@ -606,6 +606,11 @@ int fimc_hw_set_camera_source(struct fimc_dev *fimc, switch (source->fimc_bus_type) { case FIMC_BUS_TYPE_ITU_601: case FIMC_BUS_TYPE_ITU_656: + if (fimc_fmt_is_user_defined(f->fmt->color)) { + cfg |= FIMC_REG_CISRCFMT_ITU601_8BIT; + break; + } + for (i = 0; i < ARRAY_SIZE(pix_desc); i++) { if (vc->ci_fmt.code == pix_desc[i].pixelcode) { cfg = pix_desc[i].cisrcfmt; @@ -707,6 +712,8 @@ int fimc_hw_set_camera_type(struct fimc_dev *fimc, case FIMC_BUS_TYPE_ITU_601...FIMC_BUS_TYPE_ITU_656: if (source->mux_id == 0) /* ITU-A, ITU-B: 0, 1 */ cfg |= FIMC_REG_CIGCTRL_SELCAM_ITU_A; + if (vid_cap->ci_fmt.code == MEDIA_BUS_FMT_JPEG_1X8) + cfg |= FIMC_REG_CIGCTRL_CAM_JPEG; break; case FIMC_BUS_TYPE_LCD_WRITEBACK_A: cfg |= FIMC_REG_CIGCTRL_CAMIF_SELWB; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ```