From: "qiangming.xia" <redacted>

    Mediatek i2c controller support for continuous mode,
it allow to transfer once multiple writing messages of equal length.
    For example, a slave need write a serial of non-continuous
offset range in chip,e.g. writing offset 0,offset 2 and offset 4.
Normally, it need three times i2c write operation. However,it can
use once transfer to finish it by using continuous mode.

Change-Id: If06991e3fd32867bdeaacf15bb24864d5c5904d0
Signed-off-by: Qiangming Xia <redacted>
---
 drivers/i2c/busses/i2c-mt65xx.c | 67 +++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index deef69e56906..76ec65d869f6 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c

@@ -97,6 +97,7 @@ enum mtk_trans_op {
 	I2C_MASTER_WR = 1,
 	I2C_MASTER_RD,
 	I2C_MASTER_WRRD,
+	I2C_MASTER_CONTINUOUS_WR,
 };
 
 enum I2C_REGS_OFFSET {

@@ -846,6 +847,9 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 					    OFFSET_TRANSFER_LEN);
 		}
 		mtk_i2c_writew(i2c, I2C_WRRD_TRANAC_VALUE, OFFSET_TRANSAC_LEN);
+	} else if (i2c->op == I2C_MASTER_CONTINUOUS_WR) {
+		mtk_i2c_writew(i2c, msgs->len / num, OFFSET_TRANSFER_LEN);
+		mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
 	} else {
 		mtk_i2c_writew(i2c, msgs->len, OFFSET_TRANSFER_LEN);
 		mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);

@@ -896,6 +900,23 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
 		}
 
+		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
+		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
+	} else if (i2c->op == I2C_MASTER_CONTINUOUS_WR) {
+		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
+		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
+		wpaddr = dma_map_single(i2c->dev, msgs->buf,
+					msgs->len, DMA_TO_DEVICE);
+		if (dma_mapping_error(i2c->dev, wpaddr)) {
+			kfree(msgs->buf);
+			return -ENOMEM;
+		}
+
+		if (i2c->dev_comp->support_33bits) {
+			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
+			writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
+		}
+
 		writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
 		writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
 	} else {

@@ -979,6 +1000,11 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 				 msgs->len, DMA_FROM_DEVICE);
 
 		i2c_put_dma_safe_msg_buf(dma_rd_buf, msgs, true);
+	} else if (i2c->op == I2C_MASTER_CONTINUOUS_WR) {
+		dma_unmap_single(i2c->dev, wpaddr,
+				 msgs->len, DMA_TO_DEVICE);
+
+		kfree(msgs->buf);
 	} else {
 		dma_unmap_single(i2c->dev, wpaddr, msgs->len,
 				 DMA_TO_DEVICE);

@@ -1009,6 +1035,9 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 {
 	int ret;
 	int left_num = num;
+	int i, j;
+	u8 *dma_multi_wr_buf;
+	struct i2c_msg multi_msg[1];
 	struct mtk_i2c *i2c = i2c_get_adapdata(adap);
 
 	ret = mtk_i2c_clock_enable(i2c);

@@ -1025,6 +1054,44 @@ static int mtk_i2c_transfer(struct i2c_adapter *adap,
 		}
 	}
 
+	if (num > 1) {
+		for (i = 0; i < num - 1; i++) {
+			if (!(msgs[i].flags & I2C_M_RD) && !(msgs[i+1].flags &
+				I2C_M_RD) && (msgs[i].addr == msgs[i+1].addr)
+					&& (msgs[i].len == msgs[i+1].len)) {