[PATCH v3 0/3] hwmon: Adding support for Microchip Sparx5 SoC

This is an add-on series to the main SoC Sparx5 series
(Message-ID: [off-list ref]

Changes in v3:
- Enabled driver for COMPILE_TEST
- Use "bitfield.h"
- Trimmed #includes even more
- Removed unnecessary devm_add_action()
- Maintain sort order in Makefile
- Minor cosmetics

Changes in v2:
- Removed unnecessary #includes
- Statement reordering in s5_read()
- Replaced EINVAL with EIO
- Add 'break' in default: case statement.
- Removed extra ()
- Removed superfluous initialization

Lars Povlsen (3):
  dt-bindings: hwmon: Add Sparx5 temperature sensor
  arm64: dts: sparx5: Add hwmon temperature sensor
  hwmon: sparx5: Add Sparx5 SoC temperature driver

 .../bindings/hwmon/microchip,sparx5-temp.yaml |  39 +++++
 arch/arm64/boot/dts/microchip/sparx5.dtsi     |   6 +
 drivers/hwmon/Kconfig                         |  10 ++
 drivers/hwmon/Makefile                        |   1 +
 drivers/hwmon/sparx5-temp.c                   | 136 ++++++++++++++++++
 5 files changed, 192 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
 create mode 100644 drivers/hwmon/sparx5-temp.c

-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

This add the DT binding specification for the Sparx5 temperature
sensor.

Signed-off-by: Lars Povlsen <redacted>
---
 .../bindings/hwmon/microchip,sparx5-temp.yaml | 39 +++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml
new file mode 100644
index 0000000000000..0df4813fd7b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/microchip,sparx5-temp.yaml

@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/microchip,sparx5-temp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Temperature Monitor
+
+maintainers:
+  - Lars Povlsen <lars.povlsen@microchip.com>
+
+description: |
+  Microchip Sparx5 embedded temperature monitor
+
+properties:
+  compatible:
+    enum:
+      - microchip,sparx5-temp
+
+  reg:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    tmon0: tmon@610508110 {
+        compatible = "microchip,sparx5-temp";
+        reg = <0x10508110 0xc>;
+        #thermal-sensor-cells = <0>;
+    };
+

-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

This adds a hwmon temperature node sensor to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <redacted>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index c9dbd1a8b22b6..49d4f289b9026 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi

@@ -244,5 +244,11 @@ i2c1: i2c@600103000 {
 			clock-frequency = <100000>;
 			clocks = <&ahb_clk>;
 		};
+
+		tmon0: tmon@610508110 {
+			compatible = "microchip,sparx5-temp";
+			reg = <0x6 0x10508110 0xc>;
+			#thermal-sensor-cells = <0>;
+		};
 	};
 };

-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <redacted>
---
 drivers/hwmon/Kconfig       |  10 +++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/sparx5-temp.c | 136 ++++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/hwmon/sparx5-temp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588c..7fb5e0c6c6306 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig

@@ -515,6 +515,16 @@ config SENSORS_I5K_AMB
 	  This driver can also be built as a module. If so, the module
 	  will be called i5k_amb.
 
+config SENSORS_SPARX5
+	tristate "Sparx5 SoC temperature sensor"
+	depends on ARCH_SPARX5 || COMPILE_TEST
+	help
+	  If you say yes here you get support for temperature monitoring
+	  with the Microchip Sparx5 SoC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sparx5-temp.
+
 config SENSORS_F71805F
 	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 	depends on !PPC

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe3..857293f650412 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile

@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SMM665)	+= smm665.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)	+= smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_SPARX5)	+= sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)	+= stts751.o
 obj-$(CONFIG_SENSORS_AMC6821)	+= amc6821.o
 obj-$(CONFIG_SENSORS_TC74)	+= tc74.o

diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 0000000000000..4ed8a2aec3ae9
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c

@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/bitfield.h>
+
+#define TEMP_CTRL		0
+#define TEMP_CFG		4
+#define  TEMP_CFG_CYCLES	GENMASK(24, 15)
+#define  TEMP_CFG_ENA		BIT(0)
+#define TEMP_STAT		8
+#define  TEMP_STAT_VALID	BIT(12)
+#define  TEMP_STAT_TEMP		GENMASK(11, 0)
+
+struct s5_hwmon {
+	void __iomem *base;
+};
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+	u32 val = readl(hwmon->base + TEMP_CFG);
+	u32 clk = 250;
+
+	val &= ~TEMP_CFG_CYCLES;
+	val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+	val |= TEMP_CFG_ENA;
+
+	writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+		   u32 attr, int channel, long *temp)
+{
+	struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+	int rc = 0, value;
+	u32 stat;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		stat = readl_relaxed(hwmon->base + TEMP_STAT);
+		if (!(stat & TEMP_STAT_VALID))
+			return -EIO;
+		value = stat & TEMP_STAT_TEMP;
+		value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;
+		value *= 100;
+		*temp = value;
+		break;
+	default:
+		rc = -EOPNOTSUPP;
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+			     u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+	.is_visible = s5_is_visible,
+	.read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+	.ops = &s5_hwmon_ops,
+	.info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+	struct device *hwmon_dev;
+	struct s5_hwmon *hwmon;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hwmon->base))
+		return PTR_ERR(hwmon->base);
+
+	s5_temp_enable(hwmon);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 "s5_temp",
+							 hwmon,
+							 &s5_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+	{ .compatible = "microchip,sparx5-temp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+	.probe = s5_temp_probe,
+	.driver = {
+		.name = "sparx5-temp",
+		.of_match_table = s5_temp_match,
+	},
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");

-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

On 6/16/20 1:25 AM, Lars Povlsen wrote:

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <redacted>
---
 drivers/hwmon/Kconfig       |  10 +++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/sparx5-temp.c | 136 ++++++++++++++++++++++++++++++++++++

This will also require documentation in
	Documentation/hwmon/sparx5-temp.rst

Alphabetic order, please.

+
+#define TEMP_CTRL		0
+#define TEMP_CFG		4
+#define  TEMP_CFG_CYCLES	GENMASK(24, 15)
+#define  TEMP_CFG_ENA		BIT(0)
+#define TEMP_STAT		8
+#define  TEMP_STAT_VALID	BIT(12)
+#define  TEMP_STAT_TEMP		GENMASK(11, 0)
+
+struct s5_hwmon {
+	void __iomem *base;
+};
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+	u32 val = readl(hwmon->base + TEMP_CFG);
+	u32 clk = 250;
+

Unnecessary variable, and magic number. It would be better to use a define
or at least explain what the number is for. Also, if this is associated with
a system clock, would it make sense to use the clock subsystem API to get
the rate ?

+	val &= ~TEMP_CFG_CYCLES;
+	val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+	val |= TEMP_CFG_ENA;
+
+	writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+		   u32 attr, int channel, long *temp)
+{
+	struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+	int rc = 0, value;
+	u32 stat;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		stat = readl_relaxed(hwmon->base + TEMP_STAT);
+		if (!(stat & TEMP_STAT_VALID))
+			return -EIO;
+		value = stat & TEMP_STAT_TEMP;
+		value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;

A comment describing the calculation would be useful, not only to help
the reader but also to help me verify if the calculation is correct
(especially since datasheets don't seem to be public).

+		value *= 100;
+		*temp = value;
+		break;
+	default:
+		rc = -EOPNOTSUPP;
+		break;
+	}
+
+	return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+			     u32 attr, int channel)
+{
+	if (type != hwmon_temp)
+		return 0;
+
+	switch (attr) {
+	case hwmon_temp_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+	HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+	.is_visible = s5_is_visible,
+	.read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+	.ops = &s5_hwmon_ops,
+	.info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+	struct device *hwmon_dev;
+	struct s5_hwmon *hwmon;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hwmon->base))
+		return PTR_ERR(hwmon->base);
+
+	s5_temp_enable(hwmon);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+							 "s5_temp",
+							 hwmon,
+							 &s5_chip_info,
+							 NULL);
+
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+	{ .compatible = "microchip,sparx5-temp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+	.probe = s5_temp_probe,
+	.driver = {
+		.name = "sparx5-temp",
+		.of_match_table = s5_temp_match,
+	},
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen [off-list ref]");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Guenter Roeck writes:

On 6/16/20 1:25 AM, Lars Povlsen wrote:

quoted

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <redacted>
---
 drivers/hwmon/Kconfig       |  10 +++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/sparx5-temp.c | 136 ++++++++++++++++++++++++++++++++++++

This will also require documentation in
        Documentation/hwmon/sparx5-temp.rst

quoted

 3 files changed, 147 insertions(+)
 create mode 100644 drivers/hwmon/sparx5-temp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 288ae9f63588c..7fb5e0c6c6306 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig

@@ -515,6 +515,16 @@ config SENSORS_I5K_AMB
        This driver can also be built as a module. If so, the module
        will be called i5k_amb.

+config SENSORS_SPARX5
+     tristate "Sparx5 SoC temperature sensor"
+     depends on ARCH_SPARX5 || COMPILE_TEST
+     help
+       If you say yes here you get support for temperature monitoring
+       with the Microchip Sparx5 SoC.
+
+       This driver can also be built as a module. If so, the module
+       will be called sparx5-temp.
+
 config SENSORS_F71805F
      tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
      depends on !PPC

diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3e32c21f5efe3..857293f650412 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile

@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_SMM665)      += smm665.o
 obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
 obj-$(CONFIG_SENSORS_SMSC47M1)       += smsc47m1.o
 obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o
+obj-$(CONFIG_SENSORS_SPARX5) += sparx5-temp.o
 obj-$(CONFIG_SENSORS_STTS751)        += stts751.o
 obj-$(CONFIG_SENSORS_AMC6821)        += amc6821.o
 obj-$(CONFIG_SENSORS_TC74)   += tc74.o

diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
new file mode 100644
index 0000000000000..4ed8a2aec3ae9
--- /dev/null
+++ b/drivers/hwmon/sparx5-temp.c

@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Sparx5 SoC temperature sensor driver
+ *
+ * Copyright (C) 2020 Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/bitfield.h>

Alphabetic order, please.

Ack.

quoted

+
+#define TEMP_CTRL            0
+#define TEMP_CFG             4
+#define  TEMP_CFG_CYCLES     GENMASK(24, 15)
+#define  TEMP_CFG_ENA                BIT(0)
+#define TEMP_STAT            8
+#define  TEMP_STAT_VALID     BIT(12)
+#define  TEMP_STAT_TEMP              GENMASK(11, 0)
+
+struct s5_hwmon {
+     void __iomem *base;
+};
+
+static void s5_temp_enable(struct s5_hwmon *hwmon)
+{
+     u32 val = readl(hwmon->base + TEMP_CFG);
+     u32 clk = 250;
+

Unnecessary variable, and magic number. It would be better to use a define
or at least explain what the number is for. Also, if this is associated with
a system clock, would it make sense to use the clock subsystem API to get
the rate ?

Yes, valid point. Changed to reference the system AHB clock, so DT and
bindings updated as well. (The magic number is clock ticks per 1us).

I am sending an update asap.

Thank you for your comments, they are highly appreciated!

Cheers,

---Lars

quoted

+     val &= ~TEMP_CFG_CYCLES;
+     val |= FIELD_PREP(TEMP_CFG_CYCLES, clk);
+     val |= TEMP_CFG_ENA;
+
+     writel(val, hwmon->base + TEMP_CFG);
+}
+
+static int s5_read(struct device *dev, enum hwmon_sensor_types type,
+                u32 attr, int channel, long *temp)
+{
+     struct s5_hwmon *hwmon = dev_get_drvdata(dev);
+     int rc = 0, value;
+     u32 stat;
+
+     switch (attr) {
+     case hwmon_temp_input:
+             stat = readl_relaxed(hwmon->base + TEMP_STAT);
+             if (!(stat & TEMP_STAT_VALID))
+                     return -EIO;
+             value = stat & TEMP_STAT_TEMP;
+             value = DIV_ROUND_CLOSEST(value * 3522, 4096) - 1094;

A comment describing the calculation would be useful, not only to help
the reader but also to help me verify if the calculation is correct
(especially since datasheets don't seem to be public).

I have added the register docs and commented the calculations.

quoted

+             value *= 100;
+             *temp = value;
+             break;
+     default:
+             rc = -EOPNOTSUPP;
+             break;
+     }
+
+     return rc;
+}
+
+static umode_t s5_is_visible(const void *_data, enum hwmon_sensor_types type,
+                          u32 attr, int channel)
+{
+     if (type != hwmon_temp)
+             return 0;
+
+     switch (attr) {
+     case hwmon_temp_input:
+             return 0444;
+     default:
+             return 0;
+     }
+}
+
+static const struct hwmon_channel_info *s5_info[] = {
+     HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ),
+     HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+     NULL
+};
+
+static const struct hwmon_ops s5_hwmon_ops = {
+     .is_visible = s5_is_visible,
+     .read = s5_read,
+};
+
+static const struct hwmon_chip_info s5_chip_info = {
+     .ops = &s5_hwmon_ops,
+     .info = s5_info,
+};
+
+static int s5_temp_probe(struct platform_device *pdev)
+{
+     struct device *hwmon_dev;
+     struct s5_hwmon *hwmon;
+
+     hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon), GFP_KERNEL);
+     if (!hwmon)
+             return -ENOMEM;
+
+     hwmon->base = devm_platform_ioremap_resource(pdev, 0);
+     if (IS_ERR(hwmon->base))
+             return PTR_ERR(hwmon->base);
+
+     s5_temp_enable(hwmon);
+
+     hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+                                                      "s5_temp",
+                                                      hwmon,
+                                                      &s5_chip_info,
+                                                      NULL);
+
+     return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+const struct of_device_id s5_temp_match[] = {
+     { .compatible = "microchip,sparx5-temp" },
+     {},
+};
+MODULE_DEVICE_TABLE(of, s5_temp_match);
+
+static struct platform_driver s5_temp_driver = {
+     .probe = s5_temp_probe,
+     .driver = {
+             .name = "sparx5-temp",
+             .of_match_table = s5_temp_match,
+     },
+};
+
+module_platform_driver(s5_temp_driver);
+
+MODULE_AUTHOR("Lars Povlsen [off-list ref]");
+MODULE_DESCRIPTION("Sparx5 SoC temperature sensor driver");
+MODULE_LICENSE("GPL");

-- 
Lars Povlsen,
Microchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Guenter Roeck writes:

On 6/16/20 1:25 AM, Lars Povlsen wrote:

quoted

This patch adds a temperature sensor driver to the Sparx5 SoC.

Signed-off-by: Lars Povlsen <redacted>
---
 drivers/hwmon/Kconfig       |  10 +++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/sparx5-temp.c | 136 ++++++++++++++++++++++++++++++++++++

This will also require documentation in
        Documentation/hwmon/sparx5-temp.rst

Sorry, forgot to ack this. I will add the necessary information.

---Lars

-- 
Lars Povlsen,
Microchip

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel