[PATCH v1 1/2] ARM: dts: aspeed: mihawk: IO expander uses TCA9554 driver
From: Ben Pai <hidden>
Date: 2020-06-05 10:06:27
Also in:
linux-aspeed, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Set smbus_en of IO expander to 1 in order to be able to read sensor. Signed-off-by: Ben Pai <redacted> --- arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts | 112 ++++++++++++++++++++ 1 file changed, 112 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index eac6ed2bbc67..25ffe65fbdc0 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts@@ -820,12 +820,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus0"; + }; + }; }; bus9_mux232: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus1 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus1"; + }; + }; }; bus9_mux233: i2c@2 {
@@ -855,12 +883,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus2 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus2"; + }; + }; }; bus9_mux236: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus3 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus3"; + }; + }; }; bus9_mux237: i2c@2 {
@@ -909,12 +965,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus4 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus4"; + }; + }; }; bus10_mux240: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus5 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus5"; + }; + }; }; bus10_mux241: i2c@2 {
@@ -944,12 +1028,40 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus6 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus6"; + }; + }; }; bus10_mux244: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + tca9554@39 { + compatible = "ti,tca9554"; + reg = <0x39>; + gpio-controller; + #gpio-cells = <2>; + + smbus7 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "smbus7"; + }; + }; }; bus10_mux245: i2c@2 {
--
2.17.1
---------------------------------------------------------------------------------------------------------------------------------------------------------------
This email contains confidential or legally privileged information and is for the sole use of its intended recipient.
Any unauthorized review, use, copying or distribution of this email or the content of this email is strictly prohibited.
If you are not the intended recipient, you may reply to the sender and should delete this e-mail immediately.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel