[PATCH] ARM: davinci: fix build failure without I2C
From: Arnd Bergmann <arnd@arndb.de>
Date: 2020-05-27 13:38:04
The two supplies are referenced outside of #ifdef CONFIG_I2C but
defined inside, which breaks the build if that is not built-in:
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
ARRAY_SIZE(fixed_supplies_1_8v), 1800000);
^
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:861:21: error: use of undeclared identifier 'fixed_supplies_1_8v'
mach-davinci/board-dm644x-evm.c:860:49: error: use of undeclared identifier 'fixed_supplies_1_8v'
regulator_register_always_on(0, "fixed-dummy", fixed_supplies_1_8v,
I don't know if the regulators are used anywhere without I2C, but
always registering them seems to be the safe choice here.
On a related note, it might be best to also deal with CONFIG_I2C=m
across the file, unless this is going to be moved to DT and removed
really soon anyway.
Fixes: 5e06d19694a4 ("ARM: davinci: dm644x-evm: Add Fixed regulators needed for tlv320aic33")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/mach-davinci/board-dm644x-evm.c | 26 ++++++++++++------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..a5d3708fedf6 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c@@ -655,19 +655,6 @@ static struct i2c_board_info __initdata i2c_info[] = { }, }; -/* Fixed regulator support */ -static struct regulator_consumer_supply fixed_supplies_3_3v[] = { - /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */ - REGULATOR_SUPPLY("AVDD", "1-001b"), - REGULATOR_SUPPLY("DRVDD", "1-001b"), -}; - -static struct regulator_consumer_supply fixed_supplies_1_8v[] = { - /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */ - REGULATOR_SUPPLY("IOVDD", "1-001b"), - REGULATOR_SUPPLY("DVDD", "1-001b"), -}; - #define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12) #define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)
@@ -700,6 +687,19 @@ static void __init evm_init_i2c(void) } #endif +/* Fixed regulator support */ +static struct regulator_consumer_supply fixed_supplies_3_3v[] = { + /* Baseboard 3.3V: 5V -> TPS54310PWP -> 3.3V */ + REGULATOR_SUPPLY("AVDD", "1-001b"), + REGULATOR_SUPPLY("DRVDD", "1-001b"), +}; + +static struct regulator_consumer_supply fixed_supplies_1_8v[] = { + /* Baseboard 1.8V: 5V -> TPS54310PWP -> 1.8V */ + REGULATOR_SUPPLY("IOVDD", "1-001b"), + REGULATOR_SUPPLY("DVDD", "1-001b"), +}; + #define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) /* venc standard timings */
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel