[PATCH v1] dmaengine: stm32-dma: check FIFO error interrupt enable
From: Pierre-Yves MORDRET <hidden>
Date: 2018-11-16 12:49:46
Also in:
dmaengine, lkml
Subsystem:
dma generic offload engine subsystem, the rest · Maintainers:
Vinod Koul, Linus Torvalds
For avoiding false FIFO detection, check FIFO Error interrupt is
enabled prior raising any errors.
This will prevent having spurious FIFO error where it shouldn't.
Signed-off-by: Pierre-Yves MORDRET <redacted>
---
Version history:
v1:
* Initial
---
---
drivers/dma/stm32-dma.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 4903a40..48f7c0f 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c@@ -641,12 +641,13 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid) { struct stm32_dma_chan *chan = devid; struct stm32_dma_device *dmadev = stm32_dma_get_dev(chan); - u32 status, scr; + u32 status, scr, sfcr; spin_lock(&chan->vchan.lock); status = stm32_dma_irq_status(chan); scr = stm32_dma_read(dmadev, STM32_DMA_SCR(chan->id)); + sfcr = stm32_dma_read(dmadev, STM32_DMA_SFCR(chan->id)); if (status & STM32_DMA_TCI) { stm32_dma_irq_clear(chan, STM32_DMA_TCI);
@@ -661,10 +662,12 @@ static irqreturn_t stm32_dma_chan_irq(int irq, void *devid) if (status & STM32_DMA_FEI) { stm32_dma_irq_clear(chan, STM32_DMA_FEI); status &= ~STM32_DMA_FEI; - if (!(scr & STM32_DMA_SCR_EN)) - dev_err(chan2dev(chan), "FIFO Error\n"); - else - dev_dbg(chan2dev(chan), "FIFO over/underrun\n"); + if (sfcr & STM32_DMA_SFCR_FEIE) { + if (!(scr & STM32_DMA_SCR_EN)) + dev_err(chan2dev(chan), "FIFO Error\n"); + else + dev_dbg(chan2dev(chan), "FIFO over/underrun\n"); + } } if (status) { stm32_dma_irq_clear(chan, status);
--
2.7.4