Bad MAINTAINERS pattern in section 'Texas Instruments' System Control Interface (TISCI) Protocol Driver'
From: Joe Perches <joe@perches.com>
Date: 2018-09-28 22:05:01
Please fix this defect appropriately.
linux-next MAINTAINERS section:
14531 Texas Instruments' System Control Interface (TISCI) Protocol Driver
14532 M: Nishanth Menon [off-list ref]
14533 M: Tero Kristo [off-list ref]
14534 M: Santosh Shilimkar [off-list ref]
14535 L: linux-arm-kernel at lists.infradead.org
14536 S: Maintained
14537 F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
14538 F: drivers/firmware/ti_sci*
14539 F: include/linux/soc/ti/ti_sci_protocol.h
14540 F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
--> 14541 F: include/dt-bindings/genpd/k2g.h
14542 F: drivers/soc/ti/ti_sci_pm_domains.c
14543 F: Documentation/devicetree/bindings/reset/ti,sci-reset.txt
14544 F: Documentation/devicetree/bindings/clock/ti,sci-clk.txt
14545 F: drivers/clk/keystone/sci-clk.c
14546 F: drivers/reset/reset-ti-sci.c
Commit that introduced this:
commit 7cc119f29b197f967161ca94c9d5cb5073b4b52b
Author: Dave Gerlach [off-list ref]
Date: Tue Apr 4 08:59:27 2017 -0700
dt-bindings: Add TI SCI PM Domains
Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI protocol to
control device power states.
Also, provide macros representing each device index as understood
by TI SCI to be used in the device node power-domain references.
These are identifiers for the K2G devices managed by the PMMC.
Acked-by: Santosh Shilimkar [off-list ref]
Reviewed-by: Ulf Hansson [off-list ref]
Acked-by: Rob Herring [off-list ref]
Signed-off-by: Nishanth Menon [off-list ref]
Signed-off-by: Dave Gerlach [off-list ref]
Signed-off-by: Santosh Shilimkar [off-list ref]
.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 57 ++++++++++++++
MAINTAINERS | 2 +
include/dt-bindings/genpd/k2g.h | 90 ++++++++++++++++++++++
3 files changed, 149 insertions(+)
Last commit with include/dt-bindings/genpd/k2g.h
commit d16645054d2f55e4011c9725ddf2dbe6177e942a
Author: Dave Gerlach [off-list ref]
Date: Fri Jul 21 09:38:36 2017 -0700
dt-bindings: Drop k2g genpd device ID macros
Commit 7cc119f29b19 ("dt-bindings: Add TI SCI PM Domains") introduced a
number of K2G_DEV_x macros to represent each device ID available on the
K2G platform for use by the genpd, clock, and reset drivers. Rather than
use these macros, which are only used in the device tree for property
values and not actually used by the drivers, let's just use the device
ID number directly in the device tree to avoid macro bloat.
Acked-by: Rob Herring [off-list ref]
Signed-off-by: Dave Gerlach [off-list ref]
Signed-off-by: Santosh Shilimkar [off-list ref]
.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 5 +-
include/dt-bindings/genpd/k2g.h | 90 ----------------------
2 files changed, 3 insertions(+), 92 deletions(-)