[PATCH 04/11] dts: qcom: Update coresight bindings for hardware ports
From: suzuki.poulose@arm.com (Suzuki K Poulose)
Date: 2018-09-11 10:17:53
Also in:
linux-devicetree, lkml
Subsystem:
arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Switch to updated coresight bindings for hw ports Cc: Andy Gross <redacted> Cc: David Brown <redacted> Cc: Ivan T. Ivanov <redacted> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 98 ++++++++++++++++++++++------------- 1 file changed, 63 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b89..5bed52b 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi@@ -1099,10 +1099,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + out-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; };
@@ -1114,7 +1115,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>;
@@ -1132,11 +1133,16 @@ port at 4 { reg = <4>; funnel0_in4: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port at 8 { + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { reg = <0>; funnel0_out: endpoint { remote-endpoint = <&etf_in>;
@@ -1152,7 +1158,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>;
@@ -1162,16 +1168,22 @@ remote-endpoint = <&etr_in>; }; }; + port at 1 { reg = <1>; replicator_out1: endpoint { remote-endpoint = <&tpiu_in>; }; }; - port at 2 { + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { reg = <0>; replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; };
@@ -1185,18 +1197,23 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port at 0 { reg = <0>; etf_in: endpoint { - slave-mode; remote-endpoint = <&funnel0_out>; }; }; - port at 1 { + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { reg = <0>; etf_out: endpoint { remote-endpoint = <&replicator_in>;
@@ -1212,10 +1229,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; };
@@ -1227,39 +1245,41 @@ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port at 0 { reg = <0>; funnel1_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port at 1 { reg = <1>; funnel1_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port at 2 { reg = <2>; funnel1_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port at 3 { reg = <3>; funnel1_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port at 4 { + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { reg = <0>; funnel1_out: endpoint { remote-endpoint = <&funnel0_in4>;
@@ -1309,9 +1329,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel1_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel1_in0>; + }; }; }; };
@@ -1325,9 +1347,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel1_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel1_in1>; + }; }; }; };
@@ -1341,9 +1365,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel1_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel1_in2>; + }; }; }; };
@@ -1357,9 +1383,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel1_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel1_in3>; + }; }; }; };
--
2.7.4