[PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

Subsystems: drm driver for allwinner de2 and de3 engine, drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, the rest

STALE2948d

6 messages, 3 authors, 2018-08-20 · open the first message on its own page

[PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Icenowy Zheng <icenowy@aosc.io>
Date: 2018-08-15 12:08:56

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize in
some situations.

Add the exclusivity to sun8i-dw-hdmi and sun8i-hdmi-phy.

Cc: stable at vger.kernel.org # v4.17+
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c  | 11 ++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  7 +++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
index 31875b636434..a10220518548 100644
--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -137,10 +137,16 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
 		goto err_assert_ctrl_reset;
 	}
 
+	ret = clk_rate_exclusive_get(hdmi->clk_tmds);
+	if (ret) {
+		dev_err(dev, "Could not get exclusivity over the tmds clock\n");
+		goto err_disable_clk_tmds;
+	}
+
 	phy_node = of_parse_phandle(dev->of_node, "phys", 0);
 	if (!phy_node) {
 		dev_err(dev, "Can't found PHY phandle\n");
-		goto err_disable_clk_tmds;
+		goto err_put_clk_tmds_exclusivity;
 	}
 
 	ret = sun8i_hdmi_phy_probe(hdmi, phy_node);

@@ -179,6 +185,8 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct device *master,
 cleanup_encoder:
 	drm_encoder_cleanup(encoder);
 	sun8i_hdmi_phy_remove(hdmi);
+err_put_clk_tmds_exclusivity:
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 err_disable_clk_tmds:
 	clk_disable_unprepare(hdmi->clk_tmds);
 err_assert_ctrl_reset:

@@ -194,6 +202,7 @@ static void sun8i_dw_hdmi_unbind(struct device *dev, struct device *master,
 
 	dw_hdmi_unbind(hdmi->hdmi);
 	sun8i_hdmi_phy_remove(hdmi);
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 	clk_disable_unprepare(hdmi->clk_tmds);
 	reset_control_assert(hdmi->rst_ctrl);
 }

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
index 82502b351aec..1e0b1d9bc0fb 100644
--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -511,13 +511,14 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 		}
 
 		clk_prepare_enable(phy->clk_phy);
+		clk_rate_exclusive_get(phy->clk_phy);
 	}
 
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_disable_clk_phy;
+		goto err_put_clk_phy_exclusivity;
 	}
 
 	ret = reset_control_deassert(phy->rst_phy);

@@ -548,7 +549,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi, struct device_node *node)
 	reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
-err_disable_clk_phy:
+err_put_clk_phy_exclusivity:
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);
 err_put_clk_pll1:
 	clk_put(phy->clk_pll1);

@@ -568,6 +570,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)
 
 	clk_disable_unprepare(phy->clk_mod);
 	clk_disable_unprepare(phy->clk_bus);
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);
 
 	reset_control_assert(phy->rst_phy);

-- 
2.18.0

Re: [linux-sunxi] [PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2018-08-15 13:39:52

Hi!

Dne sreda, 15. avgust 2018 ob 14:07:45 CEST je Icenowy Zheng napisal(a):

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize in
some situations.

Add the exclusivity to sun8i-dw-hdmi and sun8i-hdmi-phy.

Cc: stable at vger.kernel.org # v4.17+
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Given that you want this patch to be merged in stable, I have to ask what kind 
of tests did you run to prove it works as expected?

In the past, there were some issues with TCON exclusive rate setting. It turns 
out that as many scenarios as possible have to be tested before you can say 
it's working.

I imagine that it has to be tested on at least A83T, H3 (or H5) and R40 (or 
A64). They all have their own specifics which needs to be covered.

Tests which I remember from top of my head:
- run with monitor connected at boot
- run with monitor disconnected at boot and connect it later
- playing with resolution switching (at least a few non-standard, e.g 
something other than 1080p or 720p)

Best regards,
Jernej

quoted hunk

---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c  | 11 ++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  7 +++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c index 31875b636434..a10220518548
100644

--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -137,10 +137,16 @@ static int sun8i_dw_hdmi_bind(struct device *dev,

struct device *master, goto err_assert_ctrl_reset;
 	}

+	ret = clk_rate_exclusive_get(hdmi->clk_tmds);
+	if (ret) {
+		dev_err(dev, "Could not get exclusivity over the tmds clock\n");
+		goto err_disable_clk_tmds;
+	}
+
 	phy_node = of_parse_phandle(dev->of_node, "phys", 0);
 	if (!phy_node) {
 		dev_err(dev, "Can't found PHY phandle\n");
-		goto err_disable_clk_tmds;
+		goto err_put_clk_tmds_exclusivity;
 	}

 	ret = sun8i_hdmi_phy_probe(hdmi, phy_node);

@@ -179,6 +185,8 @@ static int sun8i_dw_hdmi_bind(struct device *dev, struct

device *master, cleanup_encoder:
 	drm_encoder_cleanup(encoder);
 	sun8i_hdmi_phy_remove(hdmi);
+err_put_clk_tmds_exclusivity:
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 err_disable_clk_tmds:
 	clk_disable_unprepare(hdmi->clk_tmds);
 err_assert_ctrl_reset:

@@ -194,6 +202,7 @@ static void sun8i_dw_hdmi_unbind(struct device *dev,

struct device *master,

 	dw_hdmi_unbind(hdmi->hdmi);
 	sun8i_hdmi_phy_remove(hdmi);
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 	clk_disable_unprepare(hdmi->clk_tmds);
 	reset_control_assert(hdmi->rst_ctrl);
 }

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index 82502b351aec..1e0b1d9bc0fb
100644

--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -511,13 +511,14 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi,

struct device_node *node) }

 		clk_prepare_enable(phy->clk_phy);
+		clk_rate_exclusive_get(phy->clk_phy);
 	}

 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_disable_clk_phy;
+		goto err_put_clk_phy_exclusivity;
 	}

 	ret = reset_control_deassert(phy->rst_phy);

@@ -548,7 +549,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi *hdmi,

struct device_node *node) reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
-err_disable_clk_phy:
+err_put_clk_phy_exclusivity:
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);
 err_put_clk_pll1:
 	clk_put(phy->clk_pll1);

@@ -568,6 +570,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi *hdmi)

 	clk_disable_unprepare(phy->clk_mod);
 	clk_disable_unprepare(phy->clk_bus);
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);

 	reset_control_assert(phy->rst_phy);

Re: [linux-sunxi] [PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Icenowy Zheng <icenowy@aosc.io>
Date: 2018-08-15 13:44:02


? 2018?8?15? GMT+08:00 ??9:39:44, "Jernej ?krabec" [off-list ref] ??:

Hi!

Dne sreda, 15. avgust 2018 ob 14:07:45 CEST je Icenowy Zheng
napisal(a):

quoted

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize

in

quoted

some situations.

Add the exclusivity to sun8i-dw-hdmi and sun8i-hdmi-phy.

Cc: stable at vger.kernel.org # v4.17+
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Given that you want this patch to be merged in stable, I have to ask
what kind 
of tests did you run to prove it works as expected?

In the past, there were some issues with TCON exclusive rate setting.
It turns 
out that as many scenarios as possible have to be tested before you can
say 
it's working.

I imagine that it has to be tested on at least A83T, H3 (or H5) and R40
(or 
A64). They all have their own specifics which needs to be covered.

Tests which I remember from top of my head:
- run with monitor connected at boot

BTW I think the bootloader will affect the state of displsy even
without the patch.

When could your U-Boot tweaks patchset to be done? I think they will
be needed for a really reliable test.

- run with monitor disconnected at boot and connect it later
- playing with resolution switching (at least a few non-standard, e.g 
something other than 1080p or 720p)

How to do it without starting a X server?

Best regards,
Jernej

quoted

---
 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c  | 11 ++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  7 +++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c index

31875b636434..a10220518548

quoted

--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -137,10 +137,16 @@ static int sun8i_dw_hdmi_bind(struct device

*dev,

quoted

struct device *master, goto err_assert_ctrl_reset;
 	}

+	ret = clk_rate_exclusive_get(hdmi->clk_tmds);
+	if (ret) {
+		dev_err(dev, "Could not get exclusivity over the tmds clock\n");
+		goto err_disable_clk_tmds;
+	}
+
 	phy_node = of_parse_phandle(dev->of_node, "phys", 0);
 	if (!phy_node) {
 		dev_err(dev, "Can't found PHY phandle\n");
-		goto err_disable_clk_tmds;
+		goto err_put_clk_tmds_exclusivity;
 	}

 	ret = sun8i_hdmi_phy_probe(hdmi, phy_node);

@@ -179,6 +185,8 @@ static int sun8i_dw_hdmi_bind(struct device *dev,

struct

quoted

device *master, cleanup_encoder:
 	drm_encoder_cleanup(encoder);
 	sun8i_hdmi_phy_remove(hdmi);
+err_put_clk_tmds_exclusivity:
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 err_disable_clk_tmds:
 	clk_disable_unprepare(hdmi->clk_tmds);
 err_assert_ctrl_reset:

@@ -194,6 +202,7 @@ static void sun8i_dw_hdmi_unbind(struct device

*dev,

quoted

struct device *master,

 	dw_hdmi_unbind(hdmi->hdmi);
 	sun8i_hdmi_phy_remove(hdmi);
+	clk_rate_exclusive_put(hdmi->clk_tmds);
 	clk_disable_unprepare(hdmi->clk_tmds);
 	reset_control_assert(hdmi->rst_ctrl);
 }

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index

82502b351aec..1e0b1d9bc0fb

quoted

--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -511,13 +511,14 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi

*hdmi,

quoted

struct device_node *node) }

 		clk_prepare_enable(phy->clk_phy);
+		clk_rate_exclusive_get(phy->clk_phy);
 	}

 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);
-		goto err_disable_clk_phy;
+		goto err_put_clk_phy_exclusivity;
 	}

 	ret = reset_control_deassert(phy->rst_phy);

@@ -548,7 +549,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi

*hdmi,

quoted

struct device_node *node) reset_control_assert(phy->rst_phy);
 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);
-err_disable_clk_phy:
+err_put_clk_phy_exclusivity:
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);
 err_put_clk_pll1:
 	clk_put(phy->clk_pll1);

@@ -568,6 +570,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi

*hdmi)

quoted

 	clk_disable_unprepare(phy->clk_mod);
 	clk_disable_unprepare(phy->clk_bus);
+	clk_rate_exclusive_put(phy->clk_phy);
 	clk_disable_unprepare(phy->clk_phy);

 	reset_control_assert(phy->rst_phy);

Re: [linux-sunxi] [PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Jernej Škrabec <jernej.skrabec@gmail.com>
Date: 2018-08-15 13:53:54

Hi!

Dne sreda, 15. avgust 2018 ob 15:43:19 CEST je Icenowy Zheng napisal(a):

? 2018?8?15? GMT+08:00 ??9:39:44, "Jernej ?krabec"

[off-list ref] ??:

quoted

Hi!

Dne sreda, 15. avgust 2018 ob 14:07:45 CEST je Icenowy Zheng

napisal(a):

quoted

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize

in

quoted

some situations.

Add the exclusivity to sun8i-dw-hdmi and sun8i-hdmi-phy.

Cc: stable at vger.kernel.org # v4.17+
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>

Given that you want this patch to be merged in stable, I have to ask
what kind
of tests did you run to prove it works as expected?

In the past, there were some issues with TCON exclusive rate setting.
It turns
out that as many scenarios as possible have to be tested before you can
say
it's working.

I imagine that it has to be tested on at least A83T, H3 (or H5) and R40
(or
A64). They all have their own specifics which needs to be covered.

Tests which I remember from top of my head:
- run with monitor connected at boot

BTW I think the bootloader will affect the state of displsy even
without the patch.

I know it can be an issue. For this test I imagine you can just disable 
display driver in U-Boot so the PLL doesn't get set.

When could your U-Boot tweaks patchset to be done? I think they will
be needed for a really reliable test.

I plan to do them after A64 driver is merged, so I can sync up dts files and 
switch driver to be enabled trough them. AFAIK, A64 patches are more or less 
ready and they will be merged after 4.19-rc1, right?

quoted

- run with monitor disconnected at boot and connect it later
- playing with resolution switching (at least a few non-standard, e.g
something other than 1080p or 720p)

How to do it without starting a X server?

libdrm has in it's source superb testing tool called modetest. It is useful 
for resolution testing, plane testing (scaling, positioning, color formats, 
blending, ...) and setting atomic properties (like zpos). While it doesn't 
recognize sun4i-drm driver automatically, you can specify it through command 
line parameter.

Best regards,
Jernej

quoted

Best regards,
Jernej

quoted

---

 drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c  | 11 ++++++++++-
 drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c |  7 +++++--
 2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c index

31875b636434..a10220518548

quoted

--- a/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c
+++ b/drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c

@@ -137,10 +137,16 @@ static int sun8i_dw_hdmi_bind(struct device

*dev,

quoted

struct device *master, goto err_assert_ctrl_reset;

 	}

+	ret = clk_rate_exclusive_get(hdmi->clk_tmds);
+	if (ret) {
+		dev_err(dev, "Could not get exclusivity over the tmds clock\n");
+		goto err_disable_clk_tmds;
+	}
+

 	phy_node = of_parse_phandle(dev->of_node, "phys", 0);
 	if (!phy_node) {
 	
 		dev_err(dev, "Can't found PHY phandle\n");

-		goto err_disable_clk_tmds;
+		goto err_put_clk_tmds_exclusivity;

 	}
 	
 	ret = sun8i_hdmi_phy_probe(hdmi, phy_node);

@@ -179,6 +185,8 @@ static int sun8i_dw_hdmi_bind(struct device *dev,

struct

quoted

device *master, cleanup_encoder:
 	drm_encoder_cleanup(encoder);
 	sun8i_hdmi_phy_remove(hdmi);

+err_put_clk_tmds_exclusivity:
+	clk_rate_exclusive_put(hdmi->clk_tmds);

 err_disable_clk_tmds:
 	clk_disable_unprepare(hdmi->clk_tmds);
 
 err_assert_ctrl_reset:

@@ -194,6 +202,7 @@ static void sun8i_dw_hdmi_unbind(struct device

*dev,

quoted

struct device *master,

 	dw_hdmi_unbind(hdmi->hdmi);
 	sun8i_hdmi_phy_remove(hdmi);

+	clk_rate_exclusive_put(hdmi->clk_tmds);

 	clk_disable_unprepare(hdmi->clk_tmds);
 	reset_control_assert(hdmi->rst_ctrl);
 
 }

diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index

82502b351aec..1e0b1d9bc0fb

quoted

--- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
+++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c

@@ -511,13 +511,14 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi

*hdmi,

quoted

struct device_node *node) }

 		clk_prepare_enable(phy->clk_phy);

+		clk_rate_exclusive_get(phy->clk_phy);

 	}
 	
 	phy->rst_phy = of_reset_control_get_shared(node, "phy");
 	if (IS_ERR(phy->rst_phy)) {
 	
 		dev_err(dev, "Could not get phy reset control\n");
 		ret = PTR_ERR(phy->rst_phy);

-		goto err_disable_clk_phy;
+		goto err_put_clk_phy_exclusivity;

 	}
 	
 	ret = reset_control_deassert(phy->rst_phy);

@@ -548,7 +549,8 @@ int sun8i_hdmi_phy_probe(struct sun8i_dw_hdmi

*hdmi,

quoted

struct device_node *node) reset_control_assert(phy->rst_phy);

 err_put_rst_phy:
 	reset_control_put(phy->rst_phy);

-err_disable_clk_phy:
+err_put_clk_phy_exclusivity:
+	clk_rate_exclusive_put(phy->clk_phy);

 	clk_disable_unprepare(phy->clk_phy);
 
 err_put_clk_pll1:
 	clk_put(phy->clk_pll1);

@@ -568,6 +570,7 @@ void sun8i_hdmi_phy_remove(struct sun8i_dw_hdmi

*hdmi)

quoted

 	clk_disable_unprepare(phy->clk_mod);
 	clk_disable_unprepare(phy->clk_bus);

+	clk_rate_exclusive_put(phy->clk_phy);

 	clk_disable_unprepare(phy->clk_phy);
 	
 	reset_control_assert(phy->rst_phy);

Re: [PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Maxime Ripard <hidden>
Date: 2018-08-20 11:52:49

Hi!

On Wed, Aug 15, 2018 at 08:07:45PM +0800, Icenowy Zheng wrote:

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize in
some situations.

Apart from the feedback already given, detailing which situations
would be very helpful.

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180820/c6d233ed/attachment.sig>

Re: [PATCH] drm: sun4i: exclusively set HDMI-related clocks for dw-hdmi

From: Icenowy Zheng <icenowy@aosc.io>
Date: 2018-08-20 11:54:36


? 2018?8?20? GMT+08:00 ??7:52:44, Maxime Ripard [off-list ref] ??:

Hi!

On Wed, Aug 15, 2018 at 08:07:45PM +0800, Icenowy Zheng wrote:

quoted

The glue in sun4i-drm of dw-hdmi currently doesn't set the clocks of
dw-hdmi exclusively, which will lead the display fails to initialize

in

quoted

some situations.

Apart from the feedback already given, detailing which situations
would be very helpful.

This patched is rewritten now, and new version will come
after -rc1.

Maxime

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help