[PATCH] arm64: dts: allwinner: a64: add csi regulator to sopine dts

Subsystems: arm/allwinner sunxi soc support, the rest

STALE2955d

2 messages, 2 authors, 2018-08-07 · open the first message on its own page

[PATCH] arm64: dts: allwinner: a64: add csi regulator to sopine dts

From: Akash Gajjar <hidden>
Date: 2018-08-01 07:44:37 

sopine board has a csi. enable supply dvdd-1v8-csi, dovdd-2v8-csi and
avdd-2v8-csi on board to access external camera connected to it.

Signed-off-by: Akash Gajjar <redacted>
---
 .../arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 43418bd..256229b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -68,6 +68,13 @@
 
 #include "axp803.dtsi"
 
+&reg_aldo1 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "dovdd-csi";
+};
+
 &reg_aldo2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
@@ -112,6 +119,13 @@
 	regulator-name = "vdd-sys";
 };
 
+&reg_dldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-name = "avdd-csi";
+};
+
 &reg_eldo1 {
 	regulator-always-on;
 	regulator-min-microvolt = <1800000>;
@@ -119,6 +133,13 @@
 	regulator-name = "vdd-1v8-lpddr";
 };
 
+&reg_eldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-name = "vdd-csi";
+};
+
 &reg_fldo1 {
 	regulator-min-microvolt = <1200000>;
 	regulator-max-microvolt = <1200000>;
-- 
2.7.4

Re: [PATCH] arm64: dts: allwinner: a64: add csi regulator to sopine dts

From: Chen-Yu Tsai <hidden>
Date: 2018-08-07 02:52:45 

On Wed, Aug 1, 2018 at 3:43 PM, Akash Gajjar [off-list ref] wrote:
sopine board has a csi. enable supply dvdd-1v8-csi, dovdd-2v8-csi and
avdd-2v8-csi on board to access external camera connected to it.
Unless there are other uses beyond supplying the camera module, this is not
going to be accepted. Enabling power to the camera should be in the same
patch as enabling the camera itself. And since it is a module, it should
be an overlay file.


ChenYu
quoted hunk
Signed-off-by: Akash Gajjar <redacted>
---
 .../arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
index 43418bd..256229b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
@@ -68,6 +68,13 @@

 #include "axp803.dtsi"

+&reg_aldo1 {
+       regulator-always-on;
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "dovdd-csi";
+};
+
 &reg_aldo2 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;
@@ -112,6 +119,13 @@
        regulator-name = "vdd-sys";
 };

+&reg_dldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+       regulator-name = "avdd-csi";
+};
+
 &reg_eldo1 {
        regulator-always-on;
        regulator-min-microvolt = <1800000>;
@@ -119,6 +133,13 @@
        regulator-name = "vdd-1v8-lpddr";
 };

+&reg_eldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-name = "vdd-csi";
+};
+
 &reg_fldo1 {
        regulator-min-microvolt = <1200000>;
        regulator-max-microvolt = <1200000>;
--
2.7.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help