Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/fsl_elbc_nand.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 0aa54a949653..44893e49b386 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c

@@ -637,9 +637,9 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
 	return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
 }
 
-static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
+static int fsl_elbc_attach_chip(struct nand_chip *chip)
 {
-	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct fsl_elbc_mtd *priv = nand_get_controller_data(chip);
 	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;

@@ -706,6 +706,10 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)

 	return 0;
 }
 
+static const struct nand_controller_ops fsl_elbc_controller_ops = {
+	.attach_chip = fsl_elbc_attach_chip,
+};
+
 static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 			      uint8_t *buf, int oob_required, int page)
 {

@@ -910,15 +914,8 @@ static int fsl_elbc_nand_probe(struct platform_device *pdev)
 	if (ret)
 		goto err;
 
-	ret = nand_scan_ident(mtd, 1, NULL);
-	if (ret)
-		goto err;
-
-	ret = fsl_elbc_chip_init_tail(mtd);
-	if (ret)
-		goto err;
-
-	ret = nand_scan_tail(mtd);
+	priv->chip.controller->ops = &fsl_elbc_controller_ops;
+	ret = nand_scan(mtd, 1);
 	if (ret)
 		goto err;