[PATCH v5 4/5] ARM: dts: at91: sama5d2: add nodes for I2S controllers
From: alexandre.belloni@bootlin.com (Alexandre Belloni)
Date: 2018-07-06 19:39:32
Also in:
alsa-devel, linux-clk, linux-devicetree, lkml
Hi Codrin, On 18/06/2018 17:12:38+0300, Codrin Ciubotariu wrote:
quoted hunk ↗ jump to hunk
From: Cyrille Pitchen <redacted> This patch adds DT nodes for I2S0 and I2S1. It also adds an alias for each I2S node. Signed-off-by: Cyrille Pitchen <redacted> [codrin.ciubotariu at microchip.com: added phandle to new mux clock] Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> --- The bindings for the I2S node are applied to broonie/sound.git . Changes in v5: - the previous name was: [PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers arch/arm/boot/dts/sama5d2.dtsi | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index eeb6afa1cda7..eca73ce40bc5 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi@@ -58,6 +58,8 @@ serial1 = &uart3; tcb0 = &tcb0; tcb1 = &tcb1; + i2s0 = &i2s0; + i2s1 = &i2s1; }; cpus {@@ -1313,6 +1315,22 @@ clocks = <&clk32k>; }; + i2s0: i2s at f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>; + clock-names = "pclk", "gclk", "aclk", "muxclk"; + status = "disabled"; + }; +
Can you resend the DTS patches after removing the unnecessary clocks? Thanks, -- Alexandre Belloni, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering https://bootlin.com