[PATCH v5 1/5] dt-bindings: clk: at91: add an I2S mux clock
From: codrin.ciubotariu@microchip.com (Codrin Ciubotariu)
Date: 2018-06-18 14:13:30
Also in:
alsa-devel, linux-clk, linux-devicetree, lkml
Subsystem:
common clk framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The I2S mux clock can be used to select the I2S input clock. The available parents are the peripheral and the generated clocks. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> --- Changes in v5: - specified clock's parent; - added a newline before adding the clock's compatible string; .../devicetree/bindings/clock/at91-clock.txt | 35 +++++++++++++++++++ 1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index 51c259a92d02..d0adbf5ae144 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt@@ -91,6 +91,9 @@ Required properties: at91 audio pll output on AUDIOPLLCLK that feeds the PMC and can be used by peripheral clock or generic clock + "atmel,sama5d2-clk-i2s-mux" (under pmc node): + at91 I2S clock source selection + Required properties for SCKC node: - reg : defines the IO memory reserved for the SCKC. - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -507,3 +510,35 @@ For example: atmel,clk-output-range = <0 83000000>; }; }; + +Required properties for I2S mux clocks: +- #size-cells : shall be 0 (reg is used to encode I2S bus id). +- #address-cells : shall be 1 (reg is used to encode I2S bus id). +- name: device tree node describing a specific mux clock. + * #clock-cells : from common clock binding; shall be set to 0. + * clocks : shall be the mux clock parent phandles; shall be 2 phandles: + peripheral and generated clock; the first phandle shall belong to the + peripheral clock and the second one shall belong to the generated + clock; "clock-indices" property can be user to specify + the correct order. + * reg: I2S bus id of the corresponding mux clock. + e.g. reg = <0>; for i2s0, reg = <1>; for i2s1 + +For example: + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + };
--
2.17.1