[PATCH v2] DMA: OMAP: fix OMAP1510 incorrect residue_granularity

When running on OMAP1510, omap-pcm used to obtain DMA offset from
snd_dmaengine_pcm_pointer_no_residue() based on DMA interrupt triggered
software calculations instead of snd_dmaengine_pcm_pointer() which
depended on residue value calculated from omap_dma_get_src_pos().
Similar code path is still available in now used
sound/soc/soc-generic-dmaengine-pcm.c but it is not triggered.

It was verified already before that omap_get_dma_src_pos() from
arch/arm/plat-omap/dma.c didn't work correctly for OMAP1510 - see
commit 1bdd7419910c ("ASoC: OMAP: fix OMAP1510 broken PCM pointer
callback") for details.  Apparently the same applies to its successor,
omap_dma_get_src_pos() from drivers/dma/ti/omap-dma.c.

On the other hand, snd_dmaengine_pcm_pointer_no_residue() is described
as depreciated and discouraged for use in new drivers because of its
unreliable accuracy.  However, it seems the only working option for
OPAM1510 now, as long as a software calculated residue is not
implemented as OMAP1510 fallback in omap-dma.

Using snd_dmaengine_pcm_pointer_no_residue() code path instead of
snd_dmaengine_pcm_pointer() in sound/soc/soc-generic-dmaengine-pcm.c
can be triggered in two ways:
- by passing pcm->flags |= SND_DMAENGINE_PCM_FLAG_NO_RESIDUE from
  sound/soc/omap/sdma-pcm.c,
- by passing dma_caps.residue_granularity =
  DMA_RESIDUE_GRANULARITY_DESCRIPTOR from DMA engine.

Let's do the latter.

Created and tested against next-20180531 tag from linux-next tree.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
Changelog:
v2: apply the patch against omap-dma.c moved to drivers/dma/ti/

 drivers/dma/ti/omap-dma.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti/omap-dma.c b/drivers/dma/ti/omap-dma.c
index b73fb51fbc81..96b5096c26dd 100644
--- a/drivers/dma/ti/omap-dma.c
+++ b/drivers/dma/ti/omap-dma.c

@@ -1485,7 +1485,11 @@ static int omap_dma_probe(struct platform_device *pdev)
 	od->ddev.src_addr_widths = OMAP_DMA_BUSWIDTHS;
 	od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
 	od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
-	od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+	if (__dma_omap15xx(od->plat->dma_attr))
+		od->ddev.residue_granularity =
+				DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	else
+		od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
 	od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
 	od->ddev.dev = &pdev->dev;
 	INIT_LIST_HEAD(&od->ddev.channels);