[PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro
From: Dave Gerlach <hidden>
Date: 2017-12-13 21:24:43
Also in:
linux-devicetree, linux-omap
Subsystem:
open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was mistakenly defined as an active high bit, however setting the bit actually disables the internal pull resistor on the pin, so correct this macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit value set now that the documentation has been updated. Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June 2017 Section 7.2.1. Signed-off-by: Dave Gerlach <redacted> --- include/dt-bindings/pinctrl/am43xx.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index a69e310789c5..6ce4a32f77d4 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h@@ -25,7 +25,8 @@ #define DS0_FORCE_OFF_MODE (1 << 24) #define DS0_INPUT (1 << 25) #define DS0_FORCE_OUT_HIGH (1 << 26) -#define DS0_PULL_UP_DOWN_EN (1 << 27) +#define DS0_PULL_UP_DOWN_EN (0 << 27) +#define DS0_PULL_UP_DOWN_DIS (1 << 27) #define DS0_PULL_UP_SEL (1 << 28) #define WAKEUP_ENABLE (1 << 29)
--
2.15.1