[GIT PULL] ARM: at91: DT for 4.15

Ardn, Olof,

As usual, the bulk of our changes are in device trees, this time in the
fairly recent sama5d27_som1_ek.

The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:

  Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/at91-ab-4.15-dt

for you to fetch changes up to 854106bc625a73b251ef7de2d5b49847d53041c2:

  ARM: dts: at91: at91sam9x5ek: use DMA for USART0 (2017-10-10 15:26:20 +0200)

----------------------------------------------------------------
DT for 4.15

 - sama5d2 xplained: add charger and SD card power supply
 - sama5d27_som1_ek: many adjustments
 - at91sam9x25ek: add pwm0 and can1

----------------------------------------------------------------
Alexandre Belloni (1):
      ARM: dts: at91: usb_a9g20: fix rtc node

Claudiu Beznea (4):
      ARM: dts: at91: sama5d27_som1_ek: add disabled status
      ARM: dts: at91: sama5d27_som1_ek: enable i2c2
      ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0
      ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0

Ludovic Desroches (4):
      ARM: dts: at91: sama5d27_som1_ek: update serial aliases
      ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source
      ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c
      ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source

Nicolas Ferre (6):
      ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0
      ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines
      ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines
      ARM: dts: at91: at91sam9x25ek: add CAN1 interface
      ARM: dts: at91: at91sam9x25ek: add pwm0
      ARM: dts: at91: at91sam9x5ek: use DMA for USART0

Romain Izard (1):
      ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply

Wenyou Yang (1):
      ARM: dts: at91: sama5d2_xplained: Add charger node

 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 46 ++++++++++++++---------------
 arch/arm/boot/dts/at91-sama5d2_xplained.dts | 41 +++++++++++++++++--------
 arch/arm/boot/dts/at91sam9x25ek.dts         | 10 +++++++
 arch/arm/boot/dts/at91sam9x5ek.dtsi         |  2 ++
 arch/arm/boot/dts/usb_a9g20_common.dtsi     |  4 +--
 5 files changed, 66 insertions(+), 37 deletions(-)

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

On Sun, Oct 22, 2017 at 9:58 PM, Alexandre Belloni
[off-list ref] wrote:

Wenyou Yang (1):
      ARM: dts: at91: sama5d2_xplained: Add charger node

Can you clarify this patch? It looks like an incompatible binding change.

      Arnd

On 30/10/2017 at 13:38:04 +0100, Arnd Bergmann wrote:

On Sun, Oct 22, 2017 at 9:58 PM, Alexandre Belloni
[off-list ref] wrote:

quoted

Wenyou Yang (1):
      ARM: dts: at91: sama5d2_xplained: Add charger node

Can you clarify this patch? It looks like an incompatible binding change.

Sort of but not exactly. The DT made it to the mainline but not the
driver (it was working with a driver in the atmel vendor tree though).
When the driver was upstreamed, the binding changed and now we simply
switch to the correct upstream binding.

-- 
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

On Mon, Oct 30, 2017 at 1:46 PM, Alexandre Belloni
[off-list ref] wrote:

On 30/10/2017 at 13:38:04 +0100, Arnd Bergmann wrote:

quoted

On Sun, Oct 22, 2017 at 9:58 PM, Alexandre Belloni
[off-list ref] wrote:

quoted

Wenyou Yang (1):
      ARM: dts: at91: sama5d2_xplained: Add charger node

Can you clarify this patch? It looks like an incompatible binding change.

Sort of but not exactly. The DT made it to the mainline but not the
driver (it was working with a driver in the atmel vendor tree though).
When the driver was upstreamed, the binding changed and now we simply
switch to the correct upstream binding.

Ok, makes sense. Thanks for the explanation, pulled the branch into next/dt now.

        Arnd