[PATCH] arm64: dts: marvell: Fix A37xx UART0 register size
From: Miquel Raynal <hidden>
Date: 2017-09-07 12:44:05
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, open firmware and flattened device tree bindings, the rest, tty layer and serial drivers · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
From: allen yan <redacted> Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are the UART1 registers that should not be declared in this node. Update the example in DT bindings document accordingly. Signed-off-by: Miquel Raynal <redacted> --- Documentation/devicetree/bindings/serial/mvebu-uart.txt | 2 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
index 6087defd9f93..d37fabe17bd1 100644
--- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt@@ -8,6 +8,6 @@ Required properties: Example: serial at 12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <43>; };
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 51763d674050..9e558801266a 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi@@ -129,7 +129,7 @@ uart0: serial at 12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
--
2.11.0