[PATCH] ARM: dts: imx6q-utilite-pro: add HDMI CEC pinctrl
From: christopher.spinrath at rwth-aachen.de <hidden>
Date: 2017-09-20 16:48:34
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Christopher Spinrath <redacted> On the Utilite Pro the CEC line is wired up to the HDMI connector. Add the required pinctrl setting. Signed-off-by: Christopher Spinrath <redacted> --- arch/arm/boot/dts/imx6q-utilite-pro.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
index 16d5be1aeb3c..f5d9c34b0d39 100644
--- a/arch/arm/boot/dts/imx6q-utilite-pro.dts
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts@@ -188,6 +188,8 @@ /delete-node/&hdmi_mux_1; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmicec>; ddc-i2c-bus = <&i2c2>; status = "okay"; };
@@ -211,6 +213,12 @@ >; }; + pinctrl_hdmicec: hdmicecgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + pinctrl_hpd: hpdgrp { fsl,pins = < MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
--
2.14.1