[PATCH v1] i2c:i2c-stm32f7: fix setup structure
From: Pierre-Yves MORDRET <hidden>
Date: 2017-09-21 13:31:01
I2C drive setup structure is not properly allocated. Make it static instead of pointer to store driver data. Signed-off-by: Pierre-Yves MORDRET <redacted> --- drivers/i2c/busses/i2c-stm32f7.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 47c67b0..42ebdb1 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c@@ -215,7 +215,7 @@ struct stm32f7_i2c_dev { unsigned int msg_num; unsigned int msg_id; struct stm32f7_i2c_msg f7_msg; - struct stm32f7_i2c_setup *setup; + struct stm32f7_i2c_setup setup; struct stm32f7_i2c_timings timing; };
@@ -537,7 +537,7 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev) writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR); /* Enable I2C */ - if (i2c_dev->setup->analog_filter) + if (i2c_dev->setup.analog_filter) stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1, STM32F7_I2C_CR1_ANFOFF); else
@@ -887,22 +887,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev) } setup = of_device_get_match_data(&pdev->dev); - i2c_dev->setup->rise_time = setup->rise_time; - i2c_dev->setup->fall_time = setup->fall_time; - i2c_dev->setup->dnf = setup->dnf; - i2c_dev->setup->analog_filter = setup->analog_filter; + i2c_dev->setup = *setup; ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns", &rise_time); if (!ret) - i2c_dev->setup->rise_time = rise_time; + i2c_dev->setup.rise_time = rise_time; ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns", &fall_time); if (!ret) - i2c_dev->setup->fall_time = fall_time; + i2c_dev->setup.fall_time = fall_time; - ret = stm32f7_i2c_setup_timing(i2c_dev, i2c_dev->setup); + ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup); if (ret) goto clk_free;
--
2.7.4