[PATCH v4 1/6] ARM: dts: imx6qdl-icore: Add Sound card with codec node

Subsystems: the rest

STALE3287d

7 messages, 2 authors, 2017-09-11 · open the first message on its own page

[PATCH v4 1/6] ARM: dts: imx6qdl-icore: Add Sound card with codec node

From: Jagan Teki <hidden>
Date: 2017-09-11 09:17:58 

From: Jagan Teki <jagan@amarulasolutions.com>

Add support for Sound card and related codec(via i2c3) nodes
to i.CoreM6 QDL module boards.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- Moved sgtl5000 node into dtsi instead of multiple copies of
  same in dts files
Changes for v3:
- Replace fsl,imx-audio-sgtl5000 and use simple-audio-card
Changes for v2:
- Use proper [label:] node-name[@unit-address] for codec

 arch/arm/boot/dts/imx6qdl-icore.dtsi | 57 ++++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 56d0c5d..5cdb93a 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -55,6 +55,25 @@
 		default-brightness-level = <7>;
 	};
 
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+
+	reg_2p5v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -87,6 +106,31 @@
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;  /* 25MHz for example */
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
 };
 
 &can1 {
@@ -141,6 +185,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	sgtl5000: codec at a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
 };
 
 &pwm3 {
@@ -149,6 +202,10 @@
 	status = "okay";
 };
 
+&ssi1 {
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-- 
2.7.4

[PATCH v4 2/6] ARM: dts: imx6qdl-icore-rqs: Move Sound nodes to dtsi

From: Jagan Teki <hidden>
Date: 2017-09-11 09:18:07 

From: Jagan Teki <jagan@amarulasolutions.com>

imx6q, imx6dl icore-rqs modules share common sound nodes,
so move the sound nodes from imx6q-icore-rqs into dtsi so-that
both can share the common node details.

And also replace codec: sgtl5000 at 0a => sgtl5000: codec at a
on imx6q-icore-rqs.dts to [label:] node-name[@unit-address]
according to devicetree specification from ePAPER v1.1

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- New patch

 arch/arm/boot/dts/imx6q-icore-rqs.dts    | 24 ------------------------
 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 22 ++++++++++++++++++++++
 2 files changed, 22 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
index e451b4c..b81f48c 100644
--- a/arch/arm/boot/dts/imx6q-icore-rqs.dts
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -47,30 +47,6 @@
 / {
 	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
 	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
-
-	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
-			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
-	};
-};
-
-&i2c3 {
-	codec: sgtl5000 at 0a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		clocks = <&clks IMX6QDL_CLK_CKO>;
-		VDDA-supply = <&reg_2p5v>;
-		VDDIO-supply = <&reg_3p3v>;
-		VDDD-supply = <&reg_1p8v>;
-	};
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 7ca291e..e196d1b 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -118,6 +118,19 @@
 		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
 		clock-names = "refclk";
 	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
 };
 
 &clks {
@@ -174,6 +187,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	sgtl5000: codec at a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
 };
 
 &pcie {
-- 
2.7.4

[PATCH v4 3/6] ARM: dts: imx6qdl-icore-rqs: Replace to use simple-audio-card

From: Jagan Teki <hidden>
Date: 2017-09-11 09:18:19 

From: Jagan Teki <jagan@amarulasolutions.com>

This patch replace fsl,imx-audio-sgtl5000 and use simple-audio-card
for Engicam i.CoreM6 RQS QDL platform boards.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- None
Changes for v3:
- Newly added

 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 26 +++++++++++++++++++-------
 1 file changed, 19 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index e196d1b..6bb722a 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -120,16 +120,28 @@
 	};
 
 	sound {
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "imx-audio-sgtl5000";
-		ssi-controller = <&ssi1>;
-		audio-codec = <&sgtl5000>;
-		audio-routing =
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		mux-int-port = <1>;
-		mux-ext-port = <4>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 };
 
-- 
2.7.4

[PATCH v4 4/6] ARM: dts: imx6dl-icore: Add LVDS support

From: Jagan Teki <hidden>
Date: 2017-09-11 09:18:37 

From: Jagan Teki <jagan@amarulasolutions.com>

Add LVDS display support for OpenFrame Capacitive touch 7 inc
display which is supported by Engicam i.CoreM6 DualLite/Solo Starter Kit.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3, v2:
- none

 arch/arm/boot/dts/imx6dl-icore.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 6de83c7..360c32e 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -57,3 +57,28 @@
 &can2 {
 	status = "okay";
 };
+
+&ldb {
+	status = "okay";
+
+	lvds-channel at 0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <30>;
+				hfront-porch = <30>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <64>;
+				vsync-len = <20>;
+			};
+		};
+	};
+};
-- 
2.7.4

[PATCH v4 5/6] ARM: dts: imx6dl-icore: Add touchscreen node

From: Jagan Teki <hidden>
Date: 2017-09-11 09:18:43 

From: Jagan Teki <jagan@amarulasolutions.com>

max11801 touchscreen on Engicam iCoreM6 DualLite/Solo module is
connected via i2c1, so add max11801: touchscreen at 48 on i2c1.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4, v3,v2:
- none

 arch/arm/boot/dts/imx6dl-icore.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
index 360c32e..35211f3 100644
--- a/arch/arm/boot/dts/imx6dl-icore.dts
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -58,6 +58,15 @@
 	status = "okay";
 };
 
+&i2c1 {
+	max11801: touchscreen at 48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
 &ldb {
 	status = "okay";
 
-- 
2.7.4

[PATCH v4 6/6] ARM: dts: imx6qdl-icore-rqs: Add CAN nodes

From: Jagan Teki <hidden>
Date: 2017-09-11 09:18:48 

From: Jagan Teki <jagan@amarulasolutions.com>

Add support for can1 and can2 nodes on Engicam i.CoreM6 RQS
QDL module boards.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Matteo Lisi <redacted>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v4:
- Moved can nodes from dts to dtsi 
Changes for v3:
- none
Changes for v2:
- s/flexcan/can

 arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
index 6bb722a..9969e7f3 100644
--- a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -145,6 +145,20 @@
 	};
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
 &clks {
 	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
@@ -304,6 +318,20 @@
 		>;
 	};
 
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-- 
2.7.4

Re: [PATCH v4 4/6] ARM: dts: imx6dl-icore: Add LVDS support

From: Fabio Estevam <festevam@gmail.com>
Date: 2017-09-11 11:25:34 

Hi Jagan,

On Mon, Sep 11, 2017 at 6:12 AM, Jagan Teki [off-list ref] wrote:

+&ldb {
+       status = "okay";
+
+       lvds-channel at 0 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: timing0 {
+                               clock-frequency = <60000000>;
+                               hactive = <800>;
+                               vactive = <480>;
+                               hback-porch = <30>;
+                               hfront-porch = <30>;
+                               vback-porch = <5>;
+                               vfront-porch = <5>;
+                               hsync-len = <64>;
+                               vsync-len = <20>;
Please add the support of this panel to drivers/gpu/drm/panel/panel-simple.c.

Then you can refer its compatible in your board dts.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help