[PATCH] arm64: dts: marvell: fix number of GPIOs in Armada AP806 description

The Armada AP806 has 20 pins, and therefore 20 GPIOs (from 0 to 19
included) and not 19 pins. Therefore, we fix the Device Tree
description for the GPIO controller.

Before this patch:

$ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges
GPIO ranges handled:
0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19]
0: f06f4000.system-controller:gpio GPIOS [0 - 18] PINS [0 - 18]

After this patch:

$ cat /sys/kernel/debug/pinctrl/f06f4000.system-controller:pinctrl/gpio-ranges
GPIO ranges handled:
0: mvebu-gpio GPIOS [0 - 19] PINS [0 - 19]
0: f06f4000.system-controller:gpio GPIOS [0 - 19] PINS [0 - 19]

Fixes: 63dac0f4924b9 ("arm64: dts: marvell: add gpio support for Armada 7K/8K")
Signed-off-by: Thomas Petazzoni <redacted>
---
Note: this is a fix, that should go in the 4.13 cycle, as
63dac0f4924b9 was introduced in 4.13.
---
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
index 1eb1f1e..4d36071 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -268,10 +268,10 @@
 				ap_gpio: gpio {
 					compatible = "marvell,armada-8k-gpio";
 					offset = <0x1040>;
-					ngpios = <19>;
+					ngpios = <20>;
 					gpio-controller;
 					#gpio-cells = <2>;
-					gpio-ranges = <&ap_pinctrl 0 0 19>;
+					gpio-ranges = <&ap_pinctrl 0 0 20>;
 				};
 			};
 		};

-- 
2.9.4