[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

STALE3399d

2 messages, 2 authors, 2017-06-07 · open the first message on its own page

[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: Gregory CLEMENT <hidden>
Date: 2017-06-07 08:43:49

Hi Dave,
 
 On mer., juin 07 2017, Antoine Tenart [off-list ref] wrote:
Add the description of the xMDIO bus for the Marvell Armada 7k and
Marvell Armada 8k; for both CP110 slave and master. This bus is found
on Marvell Ethernet controllers and provides an interface with the
xMDIO bus.
If you agrees with this series please don't apply this patch. I will
take care of it. We have many changes in the dt directory for the next
release and I want that all the change are in the same place to take
care of the merge conflict.

Thanks,

Gregory
quoted hunk
Signed-off-by: Antoine Tenart <redacted>
---
 arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 7 +++++++
 arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi  | 7 +++++++
 2 files changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 037ed30d75a7..95953743455e 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -98,6 +98,13 @@
 				clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
 			};
 
+			cpm_xmdio: mdio at 12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+
 			cpm_icu: interrupt-controller at 1e0000 {
 				compatible = "marvell,cp110-icu"; 
 				reg = <0x1e0000 0x10>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -103,6 +103,13 @@
 				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
 			};
 
+			cps_xmdio: mdio at 12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+
 			cps_icu: interrupt-controller at 1e0000 {
 				compatible = "marvell,cp110-icu";
 				reg = <0x1e0000 0x10>;
-- 
2.9.4
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

[PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

From: davem@davemloft.net (David Miller)
Date: 2017-06-07 19:09:51

From: Gregory CLEMENT <redacted>
Date: Wed, 07 Jun 2017 10:43:49 +0200
If you agrees with this series please don't apply this patch. I will
take care of it. We have many changes in the dt directory for the next
release and I want that all the change are in the same place to take
care of the merge conflict.
Ok, I will elide this patch when/if I apply the series to net-next.

Thanks.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help