[PATCH v11 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
From: Hoegeun Kwon <hidden>
Date: 2017-03-08 01:45:38
Also in:
dri-devel, linux-devicetree, linux-samsung-soc, lkml
Subsystem:
arm/samsung s3c, s5p and exynos arm architectures, the rest · Maintainers:
Krzysztof Kozlowski, Linus Torvalds
From: Hyungwon Hwang <redacted> This patch add the panel device tree node for S6E3HA2 display controller to TM2 dts. Signed-off-by: Hyungwon Hwang <redacted> Signed-off-by: Andrzej Hajda <redacted> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Hoegeun Kwon <redacted> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Javier Martinez Canillas <redacted> --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index dea0a6f..db3fed2 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts@@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; }; +&dsi { + panel at 0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_9 { status = "okay";
--
1.9.1