[PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules

Subsystems: arm port, the rest

STALE3495d

4 messages, 3 authors, 2017-02-28 · open the first message on its own page

[PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules

From: Ard Biesheuvel <hidden>
Date: 2017-02-15 18:30:12 

Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.

Signed-off-by: Ard Biesheuvel <redacted>
---
 arch/arm/configs/multi_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b01a43851294..597e56047747 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -936,6 +936,9 @@ CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
+CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
-- 
2.7.4

[PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules

From: arnd@arndb.de (Arnd Bergmann)
Date: 2017-02-16 16:21:51 

On Wednesday, February 15, 2017 6:30:12 PM CET Ard Biesheuvel wrote:
Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.

Signed-off-by: Ard Biesheuvel <redacted>
Applied to next/defconfig, thanks!

	Arnd

[PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules

From: jonathanh@nvidia.com (Jon Hunter)
Date: 2017-02-28 14:01:56 

On 15/02/17 18:30, Ard Biesheuvel wrote:
quoted hunk
Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.

Signed-off-by: Ard Biesheuvel <redacted>
---
 arch/arm/configs/multi_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b01a43851294..597e56047747 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -936,6 +936,9 @@ CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
+CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
Now these are enabled by default, I see the following error ...

AS [M]  arch/arm/crypto/crc32-ce-core.o
arch/arm/crypto/crc32-ce-core.S: Assembler messages:
arch/arm/crypto/crc32-ce-core.S:56: Error: unknown architecture `crc'

arch/arm/crypto/crc32-ce-core.S:138: Error: bad type for scalar -- `vmov dCONSTANTl[0],CRC'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r2'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32h r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32b r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32b r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32h r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r2'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32ch r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cb r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cb r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32ch r0,r0,r3'
scripts/Makefile.build:395: recipe for target 'arch/arm/crypto/crc32-ce-core.o' failed
make[1]: *** [arch/arm/crypto/crc32-ce-core.o] Error 1

Yes this is with an older toolchain that uses an older assembler (GNU assembler
(crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 2.23.1),
however, I am curious if older toolchains not supporting the 'crc' arch_extension
are deprecated now?

Cheers
Jon

[PATCH] ARM: multi_v7_defconfig: enable some newly added crypto modules

From: Ard Biesheuvel <hidden>
Date: 2017-02-28 14:04:55 

 On 28 February 2017 at 14:01, Jon Hunter [off-list ref] wrote:
On 15/02/17 18:30, Ard Biesheuvel wrote:
quoted
Enable the new accelerated CRC32(C), CRC-T10DIF and ChaCha20 drivers
as modules for multi_v7_defconfig builds.

Signed-off-by: Ard Biesheuvel <redacted>
---
 arch/arm/configs/multi_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b01a43851294..597e56047747 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -936,6 +936,9 @@ CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_CRC32_ARM_CE=m
+CONFIG_CRYPTO_CRCT10DIF_ARM_CE=m
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
Now these are enabled by default, I see the following error ...

AS [M]  arch/arm/crypto/crc32-ce-core.o
arch/arm/crypto/crc32-ce-core.S: Assembler messages:
arch/arm/crypto/crc32-ce-core.S:56: Error: unknown architecture `crc'

arch/arm/crypto/crc32-ce-core.S:138: Error: bad type for scalar -- `vmov dCONSTANTl[0],CRC'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r2'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32w r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32h r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32b r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32b r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:300: Error: bad instruction `crc32h r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r2'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cw r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32ch r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cb r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32cb r0,r0,r3'
arch/arm/crypto/crc32-ce-core.S:305: Error: bad instruction `crc32ch r0,r0,r3'
scripts/Makefile.build:395: recipe for target 'arch/arm/crypto/crc32-ce-core.o' failed
make[1]: *** [arch/arm/crypto/crc32-ce-core.o] Error 1

Yes this is with an older toolchain that uses an older assembler (GNU assembler
(crosstool-NG linaro-1.13.1-4.7-2013.04-20130415 - Linaro GCC 2013.04) 2.23.1),
however, I am curious if older toolchains not supporting the 'crc' arch_extension
are deprecated now?
Hello Jon,

This is surprising: this implies that there are toolchain that do
support the crypto-neon-fp-armv8 FPU type but not the scalar (i.e.,
non-NEON) CRC instructions. We could easily fix this by adding another
build time test, I just didn't expect we'd need one
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help