[PATCH] ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial
output support") added the TPIC2810 device-tree node under
SPI bus instead of I2C1.

Fix it. Tested on AM572x IDK by driving on-board LEDs
connected to TPIC2810

Fixes: 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial output support")
Signed-off-by: Sekhar Nori <redacted>
---
 arch/arm/boot/dts/am57xx-idk-common.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 814a720d5c3d..d0a55b845690 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -311,6 +311,13 @@
 			/* ID & VBUS GPIOs provided in board dts */
 		};
 	};
+
+	tpic2810: tpic2810 at 60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
 };
 
 &mcspi3 {

@@ -326,13 +333,6 @@
 		spi-max-frequency = <1000000>;
 		spi-cpol;
 	};
-
-	tpic2810: tpic2810 at 60 {
-		compatible = "ti,tpic2810";
-		reg = <0x60>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &uart3 {

-- 
2.9.0

On 02/15/2017 09:12 AM, Sekhar Nori wrote:

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial
output support") added the TPIC2810 device-tree node under
SPI bus instead of I2C1.

Well that's odd, looks like git could get confused by the lack of
context around the node during rebases. Anyway,

Acked-by: Andrew F. Davis <redacted>

* Andrew F. Davis [off-list ref] [170215 07:43]:

On 02/15/2017 09:12 AM, Sekhar Nori wrote:

quoted

commit 50e95b6b854c ("ARM: dts: am57xx-idk: Add Industrial
output support") added the TPIC2810 device-tree node under
SPI bus instead of I2C1.

Well that's odd, looks like git could get confused by the lack of
context around the node during rebases. Anyway,

Acked-by: Andrew F. Davis <redacted>

Applying into omap-for-v4.11/fixes thanks.

Tony