[PATCH 3/3] arm64: dts: Add support for FSL's LS1088A SoC
From: Harninder Rai <hidden>
Date: 2017-02-09 11:04:21
Also in:
linux-devicetree
Subsystem:
arm/freescale imx / mxc / layerscape arm architecture, the rest · Maintainers:
Frank Li, Sascha Hauer, Linus Torvalds
LS1088A contains eight ARM v8 CortexA53 processor cores
with 32 KB L1-D cache and 32 KB L1-I cache
Features summary
Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
- Arranged as two clusters of four cores sharing a 1 MB L2 cache
- Speed Up to 1.5 GHz
- Support for cluster power-gating.
Cache coherent interconnect (CCI-400)
- Hardware-managed data coherency
- Up to 700 MHz
One 64-bit DDR4 SDRAM memory controller with ECC
Data path acceleration architecture 2.0 (DPAA2)
Three PCIe 3.0 controllers
One serial ATA (SATA 3.0) controller
Three high-speed USB 3.0 controllers with integrated PHY
Following levels of DTSI/DTS files have been created for the LS1088A
SoC family:
- fsl-ls1088a.dtsi:
DTS-Include file for NXP LS1088A SoC.
- fsl-ls1088a-qds.dts:
DTS file for NXP LS1088A QDS board.
- fsl-ls1088a-rdb.dts:
DTS file for NXP LS1088A RDB board
Signed-off-by: Harninder Rai <redacted>
Signed-off-by: Ashish Kumar <redacted>
Signed-off-by: Raghav Dogra <redacted>
---
arch/arm64/boot/dts/freescale/Makefile | 2 +
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts | 102 ++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 86 ++++++++
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 234 ++++++++++++++++++++++
4 files changed, 424 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 39db645..cdf7307 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 0000000..de0604a
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts@@ -0,0 +1,102 @@ +/* + * Device Tree file for NXP LS1088a QDS Board + * + * Copyright 2017 NXP + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "LS1088A QDS Board"; + compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; +}; + +&ifc { + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + pca9547 at 77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c at 2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220 at 40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220 at 41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c at 3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc at 51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + + eeprom at 56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom at 57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + temp-sensor at 4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
new file mode 100644
index 0000000..c825a8c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts@@ -0,0 +1,86 @@ +/* + * Device Tree file for NXP LS1088a RDB board + * + * Copyright 2017 NXP + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "L1088A RDB Board"; + compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; +}; + +&ifc { + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + pca9547 at 77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c at 2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220 at 40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c at 3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc at 51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + + adt7461a at 4c { + compatible = "adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
new file mode 100644
index 0000000..da2f864
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi@@ -0,0 +1,234 @@ +/* + * Device Tree Include file for NXP Layerscape-1088A family SoC. + * + * Copyright 2017 NXP + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "fsl,ls1088a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* We have 2 clusters having 4 Cortex-A53 cores each */ + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + }; + + cpu1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + }; + + cpu2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clocks = <&clockgen 1 0>; + }; + + cpu3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clocks = <&clockgen 1 0>; + }; + + cpu4: cpu at 100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + }; + + cpu5: cpu at 101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + }; + + cpu6: cpu at 102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + clocks = <&clockgen 1 1>; + }; + + cpu7: cpu at 103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + clocks = <&clockgen 1 1>; + }; + }; + + gic: interrupt-controller at 6000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + interrupts = <1 9 0x4>; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking at 1300000 { + compatible = "fsl,ls1088a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + duart0: serial at 21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + duart1: serial at 21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gpio0: gpio at 2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio at 2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio at 2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio at 2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ifc: ifc at 2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + }; + + i2c0: i2c at 2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c1: i2c at 2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c2: i2c at 2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c3: i2c at 2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + sata0: sata at 3200000 { + compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + }; +};
--
2.7.4