[PATCH] ATM: dts: at91: sama5d2_xplained: add pwm controller
Subsystems:
the rest
3450d
5 messages,
2 authors,
2017-03-28 · open the first message on its own page
Add pwm controller bindings for sam5d2_xplained
and enable it.
Signed-off-by: Claudiu Beznea <redacted>
---
arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
index 9fc270f..493ea29 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi @@ -318,6 +318,10 @@
};
};
+ pwm0 : pwm at f802c000 { + status = "okay" ; + }; + flx0 : flexcom at f8034000 {
atmel , flexcom-mode = < ATMEL_FLEXCOM_MODE_USART > ;
status = "disabled" ; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cd459e8..e88785e 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@
status = "disabled" ;
};
+ pwm0 : pwm at f802c000 { + compatible = "atmel,sama5d2-pwm" ; + reg = < 0xf802c000 0x4000 > ; + interrupts = < 38 IRQ_TYPE_LEVEL_HIGH 7 > ; + # pwm-cells = < 3 > ; + clocks = <& pwm_clk > ; + }; + sfr : sfr at f8030000 {
compatible = "atmel,sama5d2-sfr" , "syscon" ;
reg = < 0xf8030000 0x98 > ; --
2.7.4
Hi,
There is a typo in your subject, please fix.
On 23/02/2017 at 10:32:58 +0200, Claudiu Beznea wrote: quoted hunk Add pwm controller bindings for sam5d2_xplained
and enable it.
Signed-off-by: Claudiu Beznea <redacted>
---
arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
index 9fc270f..493ea29 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi @@ -318,6 +318,10 @@
};
};
+ pwm0 : pwm at f802c000 { + status = "okay" ; + }; + flx0 : flexcom at f8034000 {
atmel , flexcom-mode = < ATMEL_FLEXCOM_MODE_USART > ;
status = "disabled" ; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cd459e8..e88785e 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@
status = "disabled" ;
};
+ pwm0 : pwm at f802c000 { + compatible = "atmel,sama5d2-pwm" ;
This compatible is not documented and is not used in any driver. Is that
really working?
+ reg = <0xf802c000 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ };
+
sfr: sfr at f8030000 {
compatible = "atmel,sama5d2-sfr", "syscon";
reg = <0xf8030000 0x98>;
--
2.7.4
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Hi,
I will correct it asap.
Thank you,
Claudiu Beznea
On 23.02.2017 10:42, Alexandre Belloni wrote: Hi,
There is a typo in your subject, please fix.
On 23/02/2017 at 10:32:58 +0200, Claudiu Beznea wrote: quoted Add pwm controller bindings for sam5d2_xplained
and enable it.
Signed-off-by: Claudiu Beznea <redacted>
---
arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
index 9fc270f..493ea29 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi @@ -318,6 +318,10 @@
};
};
+ pwm0 : pwm at f802c000 { + status = "okay" ; + }; + flx0 : flexcom at f8034000 {
atmel , flexcom-mode = < ATMEL_FLEXCOM_MODE_USART > ;
status = "disabled" ; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cd459e8..e88785e 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@
status = "disabled" ;
};
+ pwm0 : pwm at f802c000 { + compatible = "atmel,sama5d2-pwm" ; This compatible is not documented and is not used in any driver. Is that
really working?
quoted + reg = <0xf802c000 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ };
+
sfr: sfr at f8030000 {
compatible = "atmel,sama5d2-sfr", "syscon";
reg = <0xf8030000 0x98>;
--
2.7.4
Hi Alexandre,
Sorry for the late response, I am seeing just now your question bellow.
Thank you,
Claudiu Beznea
On 23.02.2017 10:42, Alexandre Belloni wrote: Hi,
There is a typo in your subject, please fix.
On 23/02/2017 at 10:32:58 +0200, Claudiu Beznea wrote: quoted Add pwm controller bindings for sam5d2_xplained
and enable it.
Signed-off-by: Claudiu Beznea <redacted>
---
arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi | 4 ++++
arch/arm/boot/dts/sama5d2.dtsi | 8 ++++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
index 9fc270f..493ea29 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained_common.dtsi @@ -318,6 +318,10 @@
};
};
+ pwm0 : pwm at f802c000 { + status = "okay" ; + }; + flx0 : flexcom at f8034000 {
atmel , flexcom-mode = < ATMEL_FLEXCOM_MODE_USART > ;
status = "disabled" ; /* conflict with ISC_D2 & ISC_D3 data pins */ diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cd459e8..e88785e 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@
status = "disabled" ;
};
+ pwm0 : pwm at f802c000 { + compatible = "atmel,sama5d2-pwm" ; This compatible is not documented and is not used in any driver. Is that
really working?
At the moment I send this patch another driver patch was send
to used this device tree bindings and also to document it.
Meanwhile you reviewed also that other patch.
Please let me know if you want to send again this DT patch since
I didn't yet receive any inputs its v2.
quoted + reg = <0xf802c000 0x4000>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+ #pwm-cells = <3>;
+ clocks = <&pwm_clk>;
+ };
+
sfr: sfr at f8030000 {
compatible = "atmel,sama5d2-sfr", "syscon";
reg = <0xf8030000 0x98>;
--
2.7.4
Hi,
On 28/03/2017 at 14:04:25 +0300, m18063 wrote: quoted quoted diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index cd459e8..e88785e 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1098,6 +1098,14 @@
status = "disabled" ;
};
+ pwm0 : pwm at f802c000 { + compatible = "atmel,sama5d2-pwm" ; This compatible is not documented and is not used in any driver. Is that
really working?
At the moment I send this patch another driver patch was send
to used this device tree bindings and also to document it.
Meanwhile you reviewed also that other patch.
Yes, I received that patch first, without the other ones. You should
have put everything in the same series.
Please let me know if you want to send again this DT patch since
I didn't yet receive any inputs its v2.
I'll take it once the pwm patch are taken by Thierry because it is not
useful as-is, unless you use:
compatible = "atmel,sama5d2-pwm", "atmel,sama5d3-pwm";
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com