[PATCH v2 0/2] Add i2c DT binding and device node for Mediatek MT2701 Soc

STALE3495d

Revision v2 of 2 in this series.

5 messages, 2 authors, 2017-02-27 · open the first message on its own page

[PATCH v2 0/2] Add i2c DT binding and device node for Mediatek MT2701 Soc

From: Jun Gao <hidden>
Date: 2017-02-15 02:33:17

This patch series based on v4.10-rc2, include MT2701 i2c DT binding and device node.

changes since v1:
- Modify commit message

Dependent on "Add clock and power domain DT nodes for Mediatek MT2701"[1].

[1] http://lists.infradead.org/pipermail/linux-mediatek/2016-December/007637.html

Jun Gao (2):
  Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc
    Platform
  arm: dts: mt2701: Add i2c device node

 .../devicetree/bindings/i2c/i2c-mt6577.txt         |   11 ++---
 arch/arm/boot/dts/mt2701-evb.dts                   |   44 ++++++++++++++++++++
 arch/arm/boot/dts/mt2701.dtsi                      |   42 +++++++++++++++++++
 3 files changed, 92 insertions(+), 5 deletions(-)

--
1.7.9.5

[PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform

From: Jun Gao <hidden>
Date: 2017-02-15 02:33:20

From: Jun Gao <redacted>

Add i2c DT binding to i2c-mt6577.txt for MT2701 and there is no need to modify i2c driver.

Change-Id: I892f866d755aa3865bffd1a80884cd41b6ecc1f1
Signed-off-by: Jun Gao <redacted>
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
index 0ce6fa3..ef22ecf 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -4,11 +4,12 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
-      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
-      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
-      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
-      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+	"mediatek,mt2701-i2c", for i2c compatible with mt2701 i2c.
+	"mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+	"mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+	"mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+	"mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+	"mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.
-- 
1.7.9.5

[PATCH v2 2/2] arm: dts: mt2701: Add i2c device node

From: Jun Gao <hidden>
Date: 2017-02-15 02:33:34

From: Jun Gao <redacted>

Add i2c device node for MT2701.

Change-Id: Idd33ad9010c43809328814350f9c29284891d171
Signed-off-by: Jun Gao <redacted>
---
 arch/arm/boot/dts/mt2701-evb.dts |   44 ++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/mt2701.dtsi    |   42 ++++++++++++++++++++++++++++++++++++
 2 files changed, 86 insertions(+)
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 082ca88..a908e94 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -24,6 +24,50 @@
 	};
 };
 
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&pio {
+	i2c0_pins_a: i2c0 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_75_SDA0__FUNC_SDA0>,
+				 <MT2701_PIN_76_SCL0__FUNC_SCL0>;
+			bias-disable;
+		};
+	};
+
+	i2c1_pins_a: i2c1 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_57_SDA1__FUNC_SDA1>,
+				 <MT2701_PIN_58_SCL1__FUNC_SCL1>;
+			bias-disable;
+		};
+	};
+
+	i2c2_pins_a: i2c2 at 0 {
+		pins1 {
+			pinmux = <MT2701_PIN_77_SDA2__FUNC_SDA2>,
+				 <MT2701_PIN_78_SCL2__FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index bdf8954..0d1539f 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -227,6 +227,48 @@
 		status = "disabled";
 	};
 
+	i2c0: i2c at 11007000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11007000 0 0x70>,
+		      <0 0x11000200 0 0x80>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c1: i2c at 11008000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11008000 0 0x70>,
+		      <0 0x11000280 0 0x80>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c at 11009000 {
+		compatible = "mediatek,mt2701-i2c",
+			     "mediatek,mt6577-i2c";
+		reg = <0 0x11009000 0 0x70>,
+		      <0 0x11000300 0 0x80>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
+		clock-div = <16>;
+		clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+		clock-names = "main", "dma";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	mmsys: syscon at 14000000 {
 		compatible = "mediatek,mt2701-mmsys", "syscon";
 		reg = <0 0x14000000 0 0x1000>;
-- 
1.7.9.5

Re: [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform

From: Rob Herring <robh@kernel.org>
Date: 2017-02-27 17:49:54

On Wed, Feb 15, 2017 at 10:32:55AM +0800, Jun Gao wrote:
From: Jun Gao <redacted>
And for the subject, please use "dt-bindings: i2c: ..."

Re: [PATCH v2 1/2] Documentation: devicetree: Add i2c binding for mediatek MT2701 Soc Platform

From: Rob Herring <robh@kernel.org>
Date: 2017-02-27 18:20:54

On Wed, Feb 15, 2017 at 10:32:55AM +0800, Jun Gao wrote:
From: Jun Gao <redacted>

Add i2c DT binding to i2c-mt6577.txt for MT2701 and there is no need to modify i2c driver.
Wrap your lines.
Change-Id: I892f866d755aa3865bffd1a80884cd41b6ecc1f1
Remove Gerrit Ids.
quoted hunk
Signed-off-by: Jun Gao <redacted>
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
index 0ce6fa3..ef22ecf 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -4,11 +4,12 @@ The Mediatek's I2C controller is used to interface with I2C devices.
 
 Required properties:
   - compatible: value should be either of the following.
-      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
-      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
-      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
-      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
-      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+	"mediatek,mt2701-i2c", for i2c compatible with mt2701 i2c.
+	"mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+	"mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+	"mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+	"mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+	"mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
All the parts after the compatible strings are a bit redundant. Just 
drop them.
   - reg: physical base address of the controller and dma base, length of memory
     mapped region.
   - interrupts: interrupt number to the cpu.
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help