Bartosz Golaszewski [off-list ref] writes:
quoted hunk
When we enable vpif capture on the da850-evm we hit a BUG_ON() because
the i2c adapter can't be found. The board file boot uses i2c adapter 1
but in the DT mode it's actually adapter 0. Drop the problematic lines.
Signed-off-by: Bartosz Golaszewski <redacted>
---
arch/arm/mach-davinci/pdata-quirks.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 94948c1..09f62ac 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -116,10 +116,6 @@ static void __init da850_vpif_legacy_init(void)
if (of_machine_is_compatible("ti,da850-lcdk"))
da850_vpif_capture_config.subdev_count = 1;
- /* EVM (UI card) uses i2c adapter 1 (not default: zero) */
- if (of_machine_is_compatible("ti,da850-evm"))
- da850_vpif_capture_config.i2c_adapter_id = 1;
-
oops, my bad.
Acked-by: Kevin Hilman <khilman@baylibre.com>
ret = da850_register_vpif_capture(&da850_vpif_capture_config);
if (ret)
pr_warn("%s: VPIF capture setup failed: %d\n",
On Tuesday 07 February 2017 11:51 PM, Kevin Hilman wrote:
Bartosz Golaszewski [off-list ref] writes:
quoted
When we enable vpif capture on the da850-evm we hit a BUG_ON() because
the i2c adapter can't be found. The board file boot uses i2c adapter 1
but in the DT mode it's actually adapter 0. Drop the problematic lines.
Signed-off-by: Bartosz Golaszewski <redacted>
---
arch/arm/mach-davinci/pdata-quirks.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 94948c1..09f62ac 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -116,10 +116,6 @@ static void __init da850_vpif_legacy_init(void)
if (of_machine_is_compatible("ti,da850-lcdk"))
da850_vpif_capture_config.subdev_count = 1;
- /* EVM (UI card) uses i2c adapter 1 (not default: zero) */
- if (of_machine_is_compatible("ti,da850-evm"))
- da850_vpif_capture_config.i2c_adapter_id = 1;
-
oops, my bad.
Acked-by: Kevin Hilman <khilman@baylibre.com>
The offending code is not in my master branch. Since its almost certain
that VPIF platform support is going to wait for v4.12, can you or Kevin
please update Kevin's original patches with these fixes rolled in?
Thanks,
Sekhar
2017-02-09 16:23 GMT+01:00 Sekhar Nori [off-list ref]:
On Tuesday 07 February 2017 11:51 PM, Kevin Hilman wrote:
quoted
Bartosz Golaszewski [off-list ref] writes:
quoted
When we enable vpif capture on the da850-evm we hit a BUG_ON() because
the i2c adapter can't be found. The board file boot uses i2c adapter 1
but in the DT mode it's actually adapter 0. Drop the problematic lines.
Signed-off-by: Bartosz Golaszewski <redacted>
---
arch/arm/mach-davinci/pdata-quirks.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm/mach-davinci/pdata-quirks.c b/arch/arm/mach-davinci/pdata-quirks.c
index 94948c1..09f62ac 100644
--- a/arch/arm/mach-davinci/pdata-quirks.c
+++ b/arch/arm/mach-davinci/pdata-quirks.c
@@ -116,10 +116,6 @@ static void __init da850_vpif_legacy_init(void)
if (of_machine_is_compatible("ti,da850-lcdk"))
da850_vpif_capture_config.subdev_count = 1;
- /* EVM (UI card) uses i2c adapter 1 (not default: zero) */
- if (of_machine_is_compatible("ti,da850-evm"))
- da850_vpif_capture_config.i2c_adapter_id = 1;
-
oops, my bad.
Acked-by: Kevin Hilman <khilman@baylibre.com>
The offending code is not in my master branch. Since its almost certain
that VPIF platform support is going to wait for v4.12, can you or Kevin
please update Kevin's original patches with these fixes rolled in?
Thanks,
Sekhar
Sure, I based my series on Kevin's integration branch for 4.10.
Thanks,
Bartosz