[PATCH 1/1] ARM: dts: enable GPIO-b for Broadcom NSP

This enables the GPIO-b support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 7c9e0fa..2f699a0 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi

@@ -241,6 +241,16 @@
 			brcm,nand-has-wp;
 		};
 
+		gpiob: gpio at 30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pwm: pwm at 31000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x31000 0x28>;

-- 
2.1.0

On 11/14/2016 05:30 AM, Yendapally Reddy Dhananjaya Reddy wrote:

This enables the GPIO-b support for Broadcom NSP SoC

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>

Applied, thanks
-- 
Florian